Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.

resources/templates/provision/yealink/t38g/{$mac}.cfg

@@ -23,30 +23,33 @@ account.1.password = {$user_password_1}
 account.1.user_name = {$user_id_1}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.1.sip_trust_ctrl =
+account.1.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
 account.1.sip_server_host = {$server_address_1}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.1.sip_server_port = 5060
+account.1.sip_server_port = {$sip_port_1}
 
-#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
+#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
 account.1.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.1.outbound_host = 
+account.1.outbound_host = {$outbound_proxy_1}
 
 #Specify the server port, the default value is 5060.
 account.1.outbound_port =
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.1.transport = 1
+{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if}
+{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if}
+{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if}
+{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if}
 
 #Configure the address of the backup outbound proxy server.
 account.1.backup_outbound_host = 
 
-#Specify the port, the default value is 5060.
+#Specify the port of the backup outbound proxy server, the default value is 5060.
 account.1.backup_outbound_port = 
 
 #Configure the voice mail number of account 1.
@@ -77,13 +80,13 @@ account.1.reject_anonymous_call =
 account.1.anonymous_reject_oncode = 
 account.1.anonymous_reject_offcode = 
 
-#Configure the SIP port for account 1, the default value is 5060. 
+#Configure the SIP port for account 1, the default value is 5060.
 account.1.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.1.expires = 
+account.1.expires = {$register_expires_1}
 
-#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
+#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default);
 account.1.100rel_enable = 
 
 #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled;
@@ -102,13 +105,13 @@ account.1.subscribe_mwi_expires =
 account.1.cid_source = 
 
 #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
-account.1.cp_source =  
+account.1.cp_source = 
 
-#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.1.session_timer.enable =      
+#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
+account.1.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.1.session_timer.expires =      
+account.1.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.1.session_timer.refresher = 
@@ -145,8 +148,10 @@ account.1.missed_calllog =
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.1.subscribe_mwi_to_vm = 
 
-#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;    
+#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
 account.1.register_mac = 
+
+#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default);
 account.1.register_line = 
 
 #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30.
@@ -205,7 +210,7 @@ account.1.compact_header_enable =
 #########################################################################
 
 #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
-account.1.nat.nat_traversal = 
+account.1.nat.nat_traversal =
 
 #Configure the STUN server address.
 account.1.nat.stun_server = 
@@ -327,30 +332,33 @@ account.2.password = {$user_password_2}
 account.2.user_name =  {$user_id_2}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.2.sip_trust_ctrl =
+account.2.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
 account.2.sip_server_host = {$server_address_2}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.2.sip_server_port = 5060
+account.2.sip_server_port = {$sip_port_2}
 
 #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
 account.2.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.2.outbound_host = 
+account.2.outbound_host = {$outbound_proxy_2}
 
 #Specify the server port, the default value is 5060.
 account.2.outbound_port =
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.2.transport = 
+{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if}
+{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if}
+{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if}
+{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if}
 
 #Configure the address of the backup outbound proxy server.
 account.2.backup_outbound_host = 
 
-#Specify the port, the default value is 5060.
+#Specify the port of the backup outbound proxy server, the default value is 5060.
 account.2.backup_outbound_port = 
 
 #Configure the voice mail number of account 2.
@@ -385,7 +393,7 @@ account.2.anonymous_reject_offcode =
 account.2.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.2.expires = 
+account.2.expires = {$register_expires_2}
 
 #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
 account.2.100rel_enable = 
@@ -394,7 +402,7 @@ account.2.100rel_enable =
 account.2.precondition = 
 
 #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
-account.2.subscribe_register = 
+account.2.subscribe_register =
 
 #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.2.subscribe_mwi = 
@@ -405,14 +413,14 @@ account.2.subscribe_mwi_expires =
 #Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
 account.2.cid_source = 
 
-#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
+#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
 account.2.cp_source =  
 
-#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.2.session_timer.enable =      
+#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
+account.2.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.2.session_timer.expires =      
+account.2.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.2.session_timer.refresher = 
@@ -449,8 +457,10 @@ account.2.missed_calllog =
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.2.subscribe_mwi_to_vm = 
 
-#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;    
+#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
 account.2.register_mac = 
+
+#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default);
 account.2.register_line = 
 
 #Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30.
@@ -493,7 +503,7 @@ account.2.enable_signal_encode =
 account.2.signal_encode_key = 
 
 #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
-account.2.dtmf.type = 
+account.2.dtmf.type =
 
 #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101.
 account.2.dtmf.dtmf_payload = 
@@ -509,7 +519,7 @@ account.2.compact_header_enable =
 #########################################################################
 
 #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
-account.2.nat.nat_traversal = 
+account.2.nat.nat_traversal =
 
 #Configure the STUN server address.
 account.2.nat.stun_server = 
@@ -526,7 +536,7 @@ account.2.nat.udp_update_time =
 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
 account.2.nat.rport = 
 
-#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
+#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
 account.2.advanced.timer_t1 = 
 account.2.advanced.timer_t2 = 
 account.2.advanced.timer_t4 = 
@@ -618,43 +628,46 @@ account.2.codec.13.rtpmap = 97
 account.3.enable = 
 
 #Configure the label displayed on the LCD screen for account 3.
-account.3.label = 
+account.3.label = {$display_name_3}
 
 #Configure the display name of account 3.
-account.3.display_name =
+account.3.display_name = {$display_name_3}
 
 #Configure the username and password for register authentication.
-account.3.auth_name = 
-account.3.password =   
+account.3.auth_name = {$user_id_3}
+account.3.password = {$user_password_3}
 
 #Configure the register user name.
-account.3.user_name =  
+account.3.user_name =  {$user_id_3}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.3.sip_trust_ctrl =
+account.3.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
-account.3.sip_server_host = 
+account.3.sip_server_host = {$server_address_3}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.3.sip_server_port = 
+account.3.sip_server_port = {$sip_port_3}
 
 #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
 account.3.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.3.outbound_host = 
+account.3.outbound_host = {$outbound_proxy_3}
 
 #Specify the server port, the default value is 5060.
 account.3.outbound_port =
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.3.transport = 
+{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if}
+{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if}
+{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if}
+{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if}
 
 #Configure the address of the backup outbound proxy server.
 account.3.backup_outbound_host = 
 
-#Specify the port, the default value is 5060.
+#Specify the port of the backup outbound proxy server, the default value is 5060.
 account.3.backup_outbound_port = 
 
 #Configure the voice mail number of account 3.
@@ -689,7 +702,7 @@ account.3.anonymous_reject_offcode =
 account.3.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.3.expires = 
+account.3.expires = {$register_expires_3}
 
 #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
 account.3.100rel_enable = 
@@ -710,13 +723,13 @@ account.3.subscribe_mwi_expires =
 account.3.cid_source = 
 
 #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
-account.3.cp_source =  
+account.3.cp_source = 
 
 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.3.session_timer.enable =      
+account.3.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.3.session_timer.expires =      
+account.3.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.3.session_timer.refresher = 
@@ -753,8 +766,10 @@ account.3.missed_calllog =
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.3.subscribe_mwi_to_vm = 
 
-#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;    
+#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
 account.3.register_mac = 
+
+#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default);
 account.3.register_line = 
 
 #Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30.
@@ -806,7 +821,7 @@ account.3.dtmf.dtmf_payload =
 account.3.dtmf.info_type = 
 
 #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled;
-account.3.compact_header_enable =
+account.3.compact_header_enable = 
 
 #########################################################################
 ##                     NAT Settings                                    ##
@@ -830,7 +845,7 @@ account.3.nat.udp_update_time =
 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
 account.3.nat.rport = 
 
-#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
+#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
 account.3.advanced.timer_t1 = 
 account.3.advanced.timer_t2 = 
 account.3.advanced.timer_t4 = 
@@ -895,7 +910,7 @@ account.3.codec.9.priority = 0
 account.3.codec.9.rtpmap = 102
 
 account.3.codec.10.enable = 0
-account.3.codec.10.payload_type = G726-32 
+account.3.codec.10.payload_type = G726-32
 account.3.codec.10.priority = 0 
 account.3.codec.10.rtpmap = 2
 
@@ -922,43 +937,46 @@ account.3.codec.13.rtpmap = 97
 account.4.enable = 
 
 #Configure the label displayed on the LCD screen for account 4.
-account.4.label = 
+account.4.label = {$display_name_4}
 
 #Configure the display name of account 4.
-account.4.display_name =
+account.4.display_name = {$display_name_4}
 
 #Configure the username and password for register authentication.
-account.4.auth_name = 
-account.4.password =   
+account.4.auth_name = {$user_id_4}
+account.4.password = {$user_password_4}
 
 #Configure the register user name.
-account.4.user_name =  
+account.4.user_name =  {$user_id_4}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.4.sip_trust_ctrl =
+account.4.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
-account.4.sip_server_host = 
+account.4.sip_server_host = {$server_address_4}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.4.sip_server_port = 
+account.4.sip_server_port = {$sip_port_4}
 
 #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
 account.4.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.4.outbound_host = 
+account.4.outbound_host = {$outbound_proxy_4}
 
 #Specify the server port, the default value is 5060.
 account.4.outbound_port =
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.4.transport = 
+{if $sip_transport_4== 'udp'}account.4.transport = 0{/if}
+{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if}
+{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if}
+{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if}
 
 #Configure the address of the backup outbound proxy server.
 account.4.backup_outbound_host = 
 
-#Specify the port, the default value is 5060.
+#Specify the port of the backup outbound proxy server, the default value is 5060.
 account.4.backup_outbound_port = 
 
 #Configure the voice mail number of account 4.
@@ -989,11 +1007,11 @@ account.4.reject_anonymous_call =
 account.4.anonymous_reject_oncode = 
 account.4.anonymous_reject_offcode = 
 
-#Configure the SIP port for account 4, the default value is 5060. 
+#Configure the SIP port for account 4, the default value is 5060.
 account.4.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.4.expires = 
+account.4.expires = {$register_expires_4}
 
 #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
 account.4.100rel_enable = 
@@ -1016,11 +1034,11 @@ account.4.cid_source =
 #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
 account.4.cp_source =  
 
-#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.4.session_timer.enable =      
+#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
+account.4.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.4.session_timer.expires =      
+account.4.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.4.session_timer.refresher = 
@@ -1057,8 +1075,10 @@ account.4.missed_calllog =
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.4.subscribe_mwi_to_vm = 
 
-#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;    
+#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
 account.4.register_mac = 
+
+#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default);  
 account.4.register_line = 
 
 #Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30.
@@ -1134,7 +1154,7 @@ account.4.nat.udp_update_time =
 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
 account.4.nat.rport = 
 
-#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
+#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
 account.4.advanced.timer_t1 = 
 account.4.advanced.timer_t2 = 
 account.4.advanced.timer_t4 = 
@@ -1229,38 +1249,41 @@ account.4.codec.13.rtpmap = 97
 account.5.enable = 
 
 #Configure the label displayed on the LCD screen for account 5.
-account.5.label = 
+account.5.label = {$display_name_5}
 
 #Configure the display name of account 5.
-account.5.display_name =
+account.5.display_name = {$display_name_5}
 
 #Configure the username and password for register authentication.
-account.5.auth_name = 
-account.5.password =   
+account.5.auth_name = {$user_id_5}
+account.5.password = {$user_password_5}
 
 #Configure the register user name.
-account.5.user_name =  
+account.5.user_name = {$user_id_5}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.5.sip_trust_ctrl =
+account.5.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
-account.5.sip_server_host = 
+account.5.sip_server_host = {$server_address_5}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.5.sip_server_port = 
+account.5.sip_server_port = {$sip_port_5}
 
-#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
+#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
 account.5.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.5.outbound_host = 
+account.5.outbound_host = {$outbound_proxy_5}
 
 #Specify the server port, the default value is 5060.
 account.5.outbound_port =
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.5.transport = 
+{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if}
+{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if}
+{if $sip_transport_5 == 'tcp'}account.5.transport = 2{/if}
+{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if}
 
 #Configure the address of the backup outbound proxy server.
 account.5.backup_outbound_host = 
@@ -1300,7 +1323,7 @@ account.5.anonymous_reject_offcode =
 account.5.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.5.expires = 
+account.5.expires = {$register_expires_5}
 
 #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
 account.5.100rel_enable = 
@@ -1320,14 +1343,14 @@ account.5.subscribe_mwi_expires =
 #Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
 account.5.cid_source = 
 
-#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
-account.5.cp_source =  
+#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
+account.5.cp_source = 
 
-#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.5.session_timer.enable =      
+#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
+account.5.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.5.session_timer.expires =      
+account.5.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.5.session_timer.refresher = 
@@ -1364,7 +1387,7 @@ account.5.missed_calllog =
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
 account.5.subscribe_mwi_to_vm = 
 
-#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;    
+#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
 account.5.register_mac = 
 account.5.register_line = 
 
@@ -1533,38 +1556,41 @@ account.5.codec.13.rtpmap = 97
 account.6.enable = 
 
 #Configure the label displayed on the LCD screen for account 6.
-account.6.label = 
+account.6.label = {$display_name_6}
 
 #Configure the display name of account 6.
-account.6.display_name =
+account.6.display_name = {$display_name_6}
 
 #Configure the username and password for register authentication.
-account.6.auth_name = 
-account.6.password =   
+account.6.auth_name = {$user_id_6}
+account.6.password = {$user_id_6}
 
 #Configure the register user name.
-account.6.user_name =  
+account.6.user_name = {$user_id_6}
 
 #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
-account.6.sip_trust_ctrl =
+account.6.sip_trust_ctrl = 1
 
 #Configure the SIP server address.
-account.6.sip_server_host = 
+account.6.sip_server_host = {$server_address_6}
 
 #Specify the port for the SIP server. The default value is 5060.
-account.6.sip_server_port = 
+account.6.sip_server_port = {$sip_port_6}
 
 #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; 
 account.6.outbound_proxy_enable = 
 
 #Specify the IP address or domain name of the outbound proxy server.
-account.6.outbound_host = 
+account.6.outbound_host = {$outbound_proxy_6}
 
 #Specify the server port, the default value is 5060.
-account.6.outbound_port =
+account.6.outbound_port = 
 
 #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
-account.6.transport = 
+{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if}
+{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if}
+{if $sip_transport_6 == 'tcp'}account.6.transport = 2{/if}
+{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} 
 
 #Configure the address of the backup outbound proxy server.
 account.6.backup_outbound_host = 
@@ -1584,7 +1610,7 @@ account.6.srv_ttl_timer_enable =
 
 #Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS;
 #Require reboot;
-account.6.dns_srv_type =
+account.6.dns_srv_type = 
 
 #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled;
 account.6.anonymous_call = 
@@ -1604,7 +1630,7 @@ account.6.anonymous_reject_offcode =
 account.6.sip_listen_port = 
 
 #Configure the register expiry time (in seconds), the default value is 3600.
-account.6.expires = 
+account.6.expires = {$register_expires_6}
 
 #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
 account.6.100rel_enable = 
@@ -1625,13 +1651,13 @@ account.6.subscribe_mwi_expires =
 account.6.cid_source = 
 
 #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; 
-account.6.cp_source =  
+account.6.cp_source = 
 
-#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;  
-account.6.session_timer.enable =      
+#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
+account.6.session_timer.enable = 
 
 #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
-account.6.session_timer.expires =      
+account.6.session_timer.expires = 
 
 #Configure the session timer refresher; 0-Uac (default), 1-Uas;
 account.6.session_timer.refresher = 
@@ -1839,7 +1865,7 @@ forward.always.enable =
 #Configure the target number that the phone will forward the call to.
 forward.always.target = 
 
-#Configure the on code and off code of always forward.
+#Configure the on code and off code to always forward.
 forward.always.on_code = 
 forward.always.off_code = 
 
@@ -1849,7 +1875,7 @@ forward.busy.target =
 forward.busy.on_code = 
 forward.busy.off_code = 
 
-#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; 
+#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled;
 #Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10.
 forward.no_answer.enable = 
 forward.no_answer.target =