Update {$mac}.cfg

resources/templates/provision/yealink/t46s/{$mac}.cfg

@@ -8,21 +8,12 @@
 ##                                   Transfer                                        ##       
 #######################################################################################
 account.1.phone_setting.call_appearance.transfer_via_new_linekey=
-account.2.phone_setting.call_appearance.transfer_via_new_linekey=
-account.3.phone_setting.call_appearance.transfer_via_new_linekey=
-account.4.phone_setting.call_appearance.transfer_via_new_linekey=
-account.5.phone_setting.call_appearance.transfer_via_new_linekey=
-account.6.phone_setting.call_appearance.transfer_via_new_linekey=
+
 
 #######################################################################################
 ##                                   Conference                                      ##       
 #######################################################################################
 account.1.phone_setting.call_appearance.conference_via_new_linekey=
-account.2.phone_setting.call_appearance.conference_via_new_linekey=
-account.3.phone_setting.call_appearance.conference_via_new_linekey=
-account.4.phone_setting.call_appearance.conference_via_new_linekey=
-account.5.phone_setting.call_appearance.conference_via_new_linekey=
-account.6.phone_setting.call_appearance.conference_via_new_linekey=
 
 
 #######################################################################################
@@ -38,55 +29,7 @@ account.1.anonymous_call_oncode =
 account.1.anonymous_call =
 account.1.send_anonymous_code =
 
-account.2.anonymous_call.server_base_only =
-account.2.send_anonymous_rejection_code =
-account.2.anonymous_reject_offcode =
-account.2.anonymous_reject_oncode =
-account.2.reject_anonymous_call=
-account.2.anonymous_call_offcode =
-account.2.anonymous_call_oncode =
-account.2.anonymous_call =
-account.2.send_anonymous_code =
 
-account.3.anonymous_call.server_base_only =
-account.3.send_anonymous_rejection_code =
-account.3.anonymous_reject_offcode =
-account.3.anonymous_reject_oncode =
-account.3.reject_anonymous_call=
-account.3.anonymous_call_offcode =
-account.3.anonymous_call_oncode =
-account.3.anonymous_call =
-account.3.send_anonymous_code =
-
-account.4.anonymous_call.server_base_only =
-account.4.send_anonymous_rejection_code =
-account.4.anonymous_reject_offcode =
-account.4.anonymous_reject_oncode =
-account.4.reject_anonymous_call=
-account.4.anonymous_call_offcode =
-account.4.anonymous_call_oncode =
-account.4.anonymous_call =
-account.4.send_anonymous_code =
-
-account.5.anonymous_call.server_base_only =
-account.5.send_anonymous_rejection_code =
-account.5.anonymous_reject_offcode =
-account.5.anonymous_reject_oncode =
-account.5.reject_anonymous_call=
-account.5.anonymous_call_offcode =
-account.5.anonymous_call_oncode =
-account.5.anonymous_call =
-account.5.send_anonymous_code =
-
-account.6.anonymous_call.server_base_only =
-account.6.send_anonymous_rejection_code =
-account.6.anonymous_reject_offcode =
-account.6.anonymous_reject_oncode =
-account.6.reject_anonymous_call=
-account.6.anonymous_call_offcode =
-account.6.anonymous_call_oncode =
-account.6.anonymous_call =
-account.6.send_anonymous_code =
 
 #######################################################################################
 ##                          Call Configuration                                       ##       
@@ -98,40 +41,7 @@ account.1.auto_label.enable=
 account.1.number_of_linekey=
 account.1.phone_setting.call_appearance.calls_per_linekey=
 
-account.2.music_server_uri=
-account.2.music_on_hold_type=
-account.2.auto_label.rule=
-account.2.auto_label.enable=
-account.2.number_of_linekey=
-account.2.phone_setting.call_appearance.calls_per_linekey=
 
-account.3.music_server_uri=
-account.3.music_on_hold_type=
-account.3.auto_label.rule=
-account.3.auto_label.enable=
-account.3.number_of_linekey=
-account.3.phone_setting.call_appearance.calls_per_linekey=
-
-account.4.music_server_uri=
-account.4.music_on_hold_type=
-account.4.auto_label.rule=
-account.4.auto_label.enable=
-account.4.number_of_linekey=
-account.4.phone_setting.call_appearance.calls_per_linekey=
-
-account.5.music_server_uri=
-account.5.music_on_hold_type=
-account.5.auto_label.rule=
-account.5.auto_label.enable=
-account.5.number_of_linekey=
-account.5.phone_setting.call_appearance.calls_per_linekey=
-
-account.6.music_server_uri=
-account.6.music_on_hold_type=
-account.6.auto_label.rule=
-account.6.auto_label.enable=
-account.6.number_of_linekey=
-account.6.phone_setting.call_appearance.calls_per_linekey=
 
 #######################################################################################
 ##                                    Codec                                          ##       
@@ -177,47 +87,6 @@ account.1.codec.g729.enable =
 account.1.codec.g722.priority =
 account.1.codec.g722.enable =
 
-
-account.2.codec.ilbc_15_2kbps.priority =
-account.2.codec.ilbc_15_2kbps.enable =
-
-account.2.codec.ilbc_13_33kbps.priority =
-account.2.codec.ilbc_13_33kbps.enable =
-
-account.2.codec.pcma.enable =
-account.2.codec.pcma.priority =
-
-account.2.codec.pcmu.enable =
-account.2.codec.pcmu.priority =
-
-account.2.codec.opus.priority =
-account.2.codec.opus.enable =
-account.2.codec.opus.para =
-
-account.2.codec.g726_40.enable =
-account.2.codec.g726_40.priority =
-
-account.2.codec.g726_32.enable =
-account.2.codec.g726_32.priority =
-
-account.2.codec.g726_24.enable =
-account.2.codec.g726_24.priority =
-
-account.2.codec.g726_16.enable =
-account.2.codec.g726_16.priority =
-
-account.2.codec.g723_63.priority =
-account.2.codec.g723_63.enable =
-
-account.2.codec.g723_53.priority =
-account.2.codec.g723_53.enable =
-
-account.2.codec.g729.priority =
-account.2.codec.g729.enable =
-
-account.2.codec.g722.priority =
-account.2.codec.g722.enable =
-
 ################################################################
 #                      Account Register                       ##
 ################################################################
@@ -281,217 +150,12 @@ account.1.outbound_proxy_fallback_interval = 120
 
 account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
 
-
-{if isset($user_password_2) }
-account.2.enable = 1
-{else}
-account.2.enable = 0
-{/if}
-account.2.label = {$display_name_2}
-account.2.display_name = {$display_name_2}
-account.2.auth_name = {$auth_id_2}
-account.2.password = {$user_password_2}
-account.2.user_name = {$user_id_2}
-
-account.2.sip_server.1.address = {$server_address_2}
-account.2.sip_server.1.port = {$sip_port_1}
-
-
-{if $sip_transport_1 == 'udp'}account.2.sip_server.1.transport_type = 0{/if}
-{if $sip_transport_1 == 'tcp'}account.2.sip_server.1.transport_type = 1{/if}
-{if $sip_transport_1 == 'tls'}account.2.sip_server.1.transport_type = 2{/if}
-{if $sip_transport_1 == 'dns srv'}account.2.sip_server.1.transport_type = 3{/if}
-
-account.2.sip_server.1.expires = {$register_expires_1}
-account.2.sip_server.1.retry_counts = 3
-
-account.2.sip_server.2.address = {$server_address_2}
-account.2.sip_server.2.port = {$sip_port_2}
-
-
-{if $sip_transport_2 == 'udp'}account.2.sip_server.2.transport_type = 0{/if}
-{if $sip_transport_2 == 'tcp'}account.2.sip_server.2.transport_type = 1{/if}
-{if $sip_transport_2 == 'tls'}account.2.sip_server.2.transport_type = 2{/if}
-{if $sip_transport_2 == 'dns srv'}account.2.sip_server.2.transport_type = 3{/if}
-
-account.2.sip_server.2.expires = {$register_expires_2}
-account.2.sip_server.2.retry_counts = 3
-
-account.2.outbound_proxy_enable = {if isset($outbound_proxy_primary_2)}1{else}0{/if}
-
-account.2.outbound_proxy.1.address = {$outbound_proxy_primary_2}
-
-{if isset($outbound_proxy_1_port)}
-account.2.outbound_proxy.1.port = {$outbound_proxy_2_port}
-{else}
-account.2.outbound_proxy.1.port = 5060
-{/if}
-
-account.2.outbound_proxy.2.address= {$outbound_proxy_secondary_2}
-
-{if isset($outbound_proxy_1_port)}
-account.2.outbound_proxy.2.port = {$outbound_proxy_2_port}
-{else}
-account.2.outbound_proxy.2.port = 5060
-{/if}
-
-{if isset($outbound_proxy_fallback_interval)}
-account.2.outbound_proxy_fallback_interval = {$outbound_proxy_fallback_interval}
-{else}
-account.2.outbound_proxy_fallback_interval = 120
-{/if}
-
-account.2.nat.nat_traversal= {if isset($stun_server)}1{else}0{/if}
-
-
-
-{if isset($user_password_3) }
-account.3.enable = 1
-{else}
-account.3.enable = 0
-{/if}
-account.3.label = {$display_name_3}
-account.3.display_name = {$display_name_3}
-account.3.auth_name = {$auth_id_3}
-account.3.password = {$user_password_3}
-account.3.user_name = {$user_id_3}
-
-account.3.sip_server.1.address = {$server_address_3}
-account.3.sip_server.1.port = {$sip_port_1}
-
-{if $sip_transport_1 == 'udp'}account.3.sip_server.1.transport_type = 0{/if}
-{if $sip_transport_1 == 'tcp'}account.3.sip_server.1.transport_type = 1{/if}
-{if $sip_transport_1 == 'tls'}account.3.sip_server.1.transport_type = 2{/if}
-{if $sip_transport_1 == 'dns srv'}account.3.sip_server.1.transport_type = 3{/if}
-
-account.3.sip_server.1.expires = {$register_expires_3}
-account.3.sip_server.1.retry_counts = 3
-
-account.3.sip_server.2.address = {$server_address_3}
-account.3.sip_server.2.port = {$sip_port_3}
-
-{if $sip_transport_1 == 'udp'}account.3.sip_server.2.transport_type = 0{/if}
-{if $sip_transport_1 == 'tcp'}account.3.sip_server.2.transport_type = 1{/if}
-{if $sip_transport_1 == 'tls'}account.3.sip_server.2.transport_type = 2{/if}
-{if $sip_transport_1 == 'dns srv'}account.3.sip_server.2.transport_type = 3{/if}
-
-account.3.sip_server.2.expires = {$register_expires_2}
-account.3.sip_server.2.retry_counts = 3
-
-account.3.outbound_proxy_enable = {if isset($outbound_proxy_primary_1)}1{else}0{/if}
-
-account.3.outbound_proxy.1.address = {$outbound_proxy_primary_1}
-
-{if isset($outbound_proxy_1_port)}
-account.3.outbound_proxy.1.port = {$outbound_proxy_1_port}
-{else}
-account.3.outbound_proxy.1.port = 5060
-{/if}
-
-account.3.outbound_proxy.2.address = {$outbound_proxy_secondary_1}
-
-{if isset($outbound_proxy_1_port)}
-account.3.outbound_proxy.2.port = {$outbound_proxy_2_port}
-{else}
-account.3.outbound_proxy.2.port = 5060
-{/if}
-
-{if isset($outbound_proxy_fallback_interval)}
-account.3.outbound_proxy_fallback_interval = {$outbound_proxy_fallback_interval}
-{else}
-account.3.outbound_proxy_fallback_interval = 120
-{/if}
-
-account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
-
-
-
-
-
-
-{if isset($user_password_4) }
-account.4.enable = 1
-{else}
-account.4.enable = 0
-{/if}
-account.4.label = {$display_name_4}
-account.4.display_name = {$display_name_4}
-account.4.auth_name = {$auth_id_4}
-account.4.password = {$user_password_4}
-account.4.user_name = {$user_id_4}
-
-account.4.sip_server.1.address = {$server_address_4}
-account.4.sip_server.1.port = {$sip_port_4}
-
-{if $sip_transport_1 == 'udp'}account.4.sip_server.1.transport_type = 0{/if}
-{if $sip_transport_1 == 'tcp'}account.4.sip_server.1.transport_type = 1{/if}
-{if $sip_transport_1 == 'tls'}account.4.sip_server.1.transport_type = 2{/if}
-{if $sip_transport_1 == 'dns srv'}account.4.sip_server.1.transport_type = 3{/if}
-
-account.4.sip_server.1.expires = {$register_expires_1}
-account.4.sip_server.1.retry_counts = 3
-
-account.4.sip_server.2.address = {$server_address_2}
-account.4.sip_server.2.port = {$sip_port_2}
-
-{if $sip_transport_1 == 'udp'}account.4.sip_server.2.transport_type = 0{/if}
-{if $sip_transport_1 == 'tcp'}account.4.sip_server.2.transport_type = 1{/if}
-{if $sip_transport_1 == 'tls'}account.4.sip_server.2.transport_type = 2{/if}
-{if $sip_transport_1 == 'dns srv'}account.4.sip_server.2.transport_type = 3{/if}
-
-account.4.sip_server.2.expires = {$register_expires_4}
-account.4.sip_server.2.retry_counts = 3
-
-account.4.outbound_proxy_enable = {if isset($outbound_proxy_primary_1)}1{else}0{/if}
-
-account.4.outbound_proxy.1.address = {$outbound_proxy_primary_1}
-
-{if isset($outbound_proxy_1_port)}
-account.4.outbound_proxy.1.port = {$outbound_proxy_1_port}
-{else}
-account.4.outbound_proxy.1.port = 5060
-{/if}
-
-account.4.outbound_proxy.2.address = {$outbound_proxy_secondary_1}
-
-{if isset($outbound_proxy_1_port)}
-account.4.outbound_proxy.2.port = {$outbound_proxy_2_port}
-{else}
-account.4.outbound_proxy.2.port = 5060
-{/if}
-
-{if isset($outbound_proxy_fallback_interval)}
-account.4.outbound_proxy_fallback_interval = {$outbound_proxy_fallback_interval}
-{else}
-account.4.outbound_proxy_fallback_interval = 120
-{/if}
-
-account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
-
-
-
-
 ################################################################
 #                      Account Basic                          ##
 ################################################################
 account.1.proxy_require=
 account.1.auto_answer=
 
-account.2.proxy_require=
-account.2.auto_answer=
-
-account.3.proxy_require=
-account.3.auto_answer=
-
-account.4.proxy_require=
-account.4.auto_answer=
-
-account.5.proxy_require=
-account.5.auto_answer=
-
-account.6.proxy_require=
-account.6.auto_answer=
-
 ################################################################
 #                      Account Advanced                       ##
 ################################################################
@@ -522,143 +186,6 @@ account.1.session_timer.enable = {$yealink_session_timer}
 account.1.conf_type=
 account.1.sip_server_type=
 
-account.2.nat.udp_update_enable= 3
-account.2.nat.udp_update_time= 30
-account.2.nat.rport= {$yealink_rport}
-
-account.2.dtmf.type=
-account.2.dtmf.info_type=
-account.2.dtmf.dtmf_payload=
-account.2.100rel_enable= {$yealink_retransmission}
-
-account.2.subscribe_register=
-account.2.cid_source = {$yealink_cid_source}
-account.2.enable_user_equal_phone=
-account.2.srtp_encryption = {$yealink_srtp_encryption}
-account.2.ptime= 20
-account.2.register_line=
-account.2.register_mac=
-account.2.reg_fail_retry_interval=
-account.2.unregister_on_reboot=
-
-account.2.session_timer.refresher=
-account.2.session_timer.expires=
-account.2.session_timer.enable = {$yealink_session_timer}
-
-account.2.conf_type=
-account.2.sip_server_type=
-
-
-account.3.nat.udp_update_enable= 3
-account.3.nat.udp_update_time= 30
-account.3.nat.rport= {$yealink_rport}
-
-account.3.dtmf.type=
-account.3.dtmf.info_type=
-account.3.dtmf.dtmf_payload=
-account.3.100rel_enable= {$yealink_retransmission}
-
-account.3.subscribe_register=
-account.3.cid_source = {$yealink_cid_source}
-account.3.enable_user_equal_phone=
-account.3.srtp_encryption = {$yealink_srtp_encryption}
-account.3.ptime= 20
-account.3.register_line=
-account.3.register_mac=
-account.3.reg_fail_retry_interval=
-account.3.unregister_on_reboot=
-
-account.3.session_timer.refresher=
-account.3.session_timer.expires=
-account.3.session_timer.enable = {$yealink_session_timer}
-
-account.3.conf_type=
-account.3.sip_server_type=
-
-
-
-account.4.nat.udp_update_enable= 3
-account.4.nat.udp_update_time= 30
-account.4.nat.rport= {$yealink_rport}
-
-account.4.dtmf.type=
-account.4.dtmf.info_type=
-account.4.dtmf.dtmf_payload=
-account.4.100rel_enable= {$yealink_retransmission}
-
-account.4.subscribe_register=
-account.4.cid_source = {$yealink_cid_source}
-account.4.enable_user_equal_phone=
-account.4.srtp_encryption = {$yealink_srtp_encryption}
-account.4.ptime= 20
-account.4.register_line=
-account.4.register_mac=
-account.4.reg_fail_retry_interval=
-account.4.unregister_on_reboot=
-
-account.4.session_timer.refresher=
-account.4.session_timer.expires=
-account.4.session_timer.enable = {$yealink_session_timer}
-
-account.4.conf_type=
-account.4.sip_server_type=
-
-
-account.5.nat.udp_update_enable= 3
-account.5.nat.udp_update_time= 30
-account.5.nat.rport= {$yealink_rport}
-
-account.5.dtmf.type=
-account.5.dtmf.info_type=
-account.5.dtmf.dtmf_payload=
-account.5.100rel_enable= {$yealink_retransmission}
-
-account.5.subscribe_register=
-account.5.cid_source = {$yealink_cid_source}
-account.5.enable_user_equal_phone=
-account.5.srtp_encryption = {$yealink_srtp_encryption}
-account.5.ptime= 20
-account.5.register_line=
-account.5.register_mac=
-account.5.reg_fail_retry_interval=
-account.5.unregister_on_reboot=
-
-account.5.session_timer.refresher=
-account.5.session_timer.expires=
-account.5.session_timer.enable = {$yealink_session_timer}
-
-account.5.conf_type=
-account.5.sip_server_type=
-
-
-account.6.nat.udp_update_enable= 3
-account.6.nat.udp_update_time= 30
-account.6.nat.rport= {$yealink_rport}
-
-account.6.dtmf.type=
-account.6.dtmf.info_type=
-account.6.dtmf.dtmf_payload=
-account.6.100rel_enable= {$yealink_retransmission}
-
-account.6.subscribe_register=
-account.6.cid_source = {$yealink_cid_source}
-account.6.enable_user_equal_phone=
-account.6.srtp_encryption = {$yealink_srtp_encryption}
-account.6.ptime= 20
-account.6.register_line=
-account.6.register_mac=
-account.6.reg_fail_retry_interval=
-account.6.unregister_on_reboot=
-
-account.6.session_timer.refresher=
-account.6.session_timer.expires=
-account.6.session_timer.enable = {$yealink_session_timer}
-
-account.6.conf_type=
-account.6.sip_server_type=
-
-
-
 ################################################################
 #                        SIP Backup Server                    ##
 ################################################################
@@ -702,208 +229,6 @@ account.1.reg_failed_retry_max_time=
 account.1.reg_failed_retry_min_time=
 account.1.redundancy_with_reg_fail.enable =
 
-account.2.outbound_proxy.1.register_on_enable=
-account.2.outbound_proxy.1.failback_timeout=
-account.2.outbound_proxy.1.failback_mode=
-account.2.outbound_proxy.1.retry_counts=
-account.2.outbound_proxy.1.only_signal_with_registered=
-account.2.outbound_proxy.1.failback_subscribe.enable=
-account.2.outbound_proxy.1.invite_retry_counts=
-
-account.2.sip_server.1.register_on_enable= 0
-account.2.sip_server.1.failback_timeout= 3600
-account.2.sip_server.1.failback_mode= 0
-account.2.sip_server.1.failback_subscribe.enable= 
-account.2.sip_server.1.only_signal_with_registered=
-account.2.sip_server.1.invite_retry_counts=
-
-account.2.outbound_proxy.2.register_on_enable=
-account.2.outbound_proxy.2.failback_timeout=
-account.2.outbound_proxy.2.failback_mode=
-account.2.outbound_proxy.2.retry_counts=
-account.2.outbound_proxy.2.only_signal_with_registered=
-account.2.outbound_proxy.2.failback_subscribe.enable=
-account.2.outbound_proxy.2.invite_retry_counts=
-
-account.2.sip_server.2.register_on_enable=
-account.2.sip_server.2.failback_timeout=
-account.2.sip_server.2.failback_mode=
-account.2.sip_server.2.failback_subscribe.enable=
-account.2.sip_server.2.only_signal_with_registered=
-account.2.sip_server.2.invite_retry_counts=
-
-account.2.static_cache_pri=
-account.2.dns_cache_type=
-account.2.naptr_build=
-account.2.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
-account.2.fallback.redundancy_type=
-account.2.reg_failed_retry_max_time=
-account.2.reg_failed_retry_min_time=
-account.2.redundancy_with_reg_fail.enable =
-
-
-
-account.3.outbound_proxy.1.register_on_enable=
-account.3.outbound_proxy.1.failback_timeout=
-account.3.outbound_proxy.1.failback_mode=
-account.3.outbound_proxy.1.retry_counts=
-account.3.outbound_proxy.1.only_signal_with_registered=
-account.3.outbound_proxy.1.failback_subscribe.enable=
-account.3.outbound_proxy.1.invite_retry_counts=
-
-account.3.sip_server.1.register_on_enable= 0
-account.3.sip_server.1.failback_timeout= 3600
-account.3.sip_server.1.failback_mode= 0
-account.3.sip_server.1.failback_subscribe.enable= 
-account.3.sip_server.1.only_signal_with_registered=
-account.3.sip_server.1.invite_retry_counts=
-
-account.3.outbound_proxy.2.register_on_enable=
-account.3.outbound_proxy.2.failback_timeout=
-account.3.outbound_proxy.2.failback_mode=
-account.3.outbound_proxy.2.retry_counts=
-account.3.outbound_proxy.2.only_signal_with_registered=
-account.3.outbound_proxy.2.failback_subscribe.enable=
-account.3.outbound_proxy.2.invite_retry_counts=
-
-account.3.sip_server.2.register_on_enable=
-account.3.sip_server.2.failback_timeout=
-account.3.sip_server.2.failback_mode=
-account.3.sip_server.2.failback_subscribe.enable=
-account.3.sip_server.2.only_signal_with_registered=
-account.3.sip_server.2.invite_retry_counts=
-
-account.3.static_cache_pri=
-account.3.dns_cache_type=
-account.3.naptr_build=
-account.3.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
-account.3.fallback.redundancy_type=
-account.3.reg_failed_retry_max_time=
-account.3.reg_failed_retry_min_time=
-account.3.redundancy_with_reg_fail.enable =
-
-
-
-account.4.outbound_proxy.1.register_on_enable=
-account.4.outbound_proxy.1.failback_timeout=
-account.4.outbound_proxy.1.failback_mode=
-account.4.outbound_proxy.1.retry_counts=
-account.4.outbound_proxy.1.only_signal_with_registered=
-account.4.outbound_proxy.1.failback_subscribe.enable=
-account.4.outbound_proxy.1.invite_retry_counts=
-
-account.4.sip_server.1.register_on_enable= 0
-account.4.sip_server.1.failback_timeout= 3600
-account.4.sip_server.1.failback_mode= 0
-account.4.sip_server.1.failback_subscribe.enable= 
-account.4.sip_server.1.only_signal_with_registered=
-account.4.sip_server.1.invite_retry_counts=
-
-account.4.outbound_proxy.2.register_on_enable=
-account.4.outbound_proxy.2.failback_timeout=
-account.4.outbound_proxy.2.failback_mode=
-account.4.outbound_proxy.2.retry_counts=
-account.4.outbound_proxy.2.only_signal_with_registered=
-account.4.outbound_proxy.2.failback_subscribe.enable=
-account.4.outbound_proxy.2.invite_retry_counts=
-
-account.4.sip_server.2.register_on_enable=
-account.4.sip_server.2.failback_timeout=
-account.4.sip_server.2.failback_mode=
-account.4.sip_server.2.failback_subscribe.enable=
-account.4.sip_server.2.only_signal_with_registered=
-account.4.sip_server.2.invite_retry_counts=
-
-account.4.static_cache_pri=
-account.4.dns_cache_type=
-account.4.naptr_build=
-account.4.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
-account.4.fallback.redundancy_type=
-account.4.reg_failed_retry_max_time=
-account.4.reg_failed_retry_min_time=
-account.4.redundancy_with_reg_fail.enable =
-
-
-account.5.outbound_proxy.1.register_on_enable=
-account.5.outbound_proxy.1.failback_timeout=
-account.5.outbound_proxy.1.failback_mode=
-account.5.outbound_proxy.1.retry_counts=
-account.5.outbound_proxy.1.only_signal_with_registered=
-account.5.outbound_proxy.1.failback_subscribe.enable=
-account.5.outbound_proxy.1.invite_retry_counts=
-
-account.5.sip_server.1.register_on_enable= 0
-account.5.sip_server.1.failback_timeout= 3600
-account.5.sip_server.1.failback_mode= 0
-account.5.sip_server.1.failback_subscribe.enable= 
-account.5.sip_server.1.only_signal_with_registered=
-account.5.sip_server.1.invite_retry_counts=
-
-account.5.outbound_proxy.2.register_on_enable=
-account.5.outbound_proxy.2.failback_timeout=
-account.5.outbound_proxy.2.failback_mode=
-account.5.outbound_proxy.2.retry_counts=
-account.5.outbound_proxy.2.only_signal_with_registered=
-account.5.outbound_proxy.2.failback_subscribe.enable=
-account.5.outbound_proxy.2.invite_retry_counts=
-
-account.5.sip_server.2.register_on_enable=
-account.5.sip_server.2.failback_timeout=
-account.5.sip_server.2.failback_mode=
-account.5.sip_server.2.failback_subscribe.enable=
-account.5.sip_server.2.only_signal_with_registered=
-account.5.sip_server.2.invite_retry_counts=
-
-account.5.static_cache_pri=
-account.5.dns_cache_type=
-account.5.naptr_build=
-account.5.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
-account.5.fallback.redundancy_type=
-account.5.reg_failed_retry_max_time=
-account.5.reg_failed_retry_min_time=
-account.5.redundancy_with_reg_fail.enable =
-
-
-account.6.outbound_proxy.1.register_on_enable=
-account.6.outbound_proxy.1.failback_timeout=
-account.6.outbound_proxy.1.failback_mode=
-account.6.outbound_proxy.1.retry_counts=
-account.6.outbound_proxy.1.only_signal_with_registered=
-account.6.outbound_proxy.1.failback_subscribe.enable=
-account.6.outbound_proxy.1.invite_retry_counts=
-
-account.6.sip_server.1.register_on_enable= 0
-account.6.sip_server.1.failback_timeout= 3600
-account.6.sip_server.1.failback_mode= 0
-account.6.sip_server.1.failback_subscribe.enable= 
-account.6.sip_server.1.only_signal_with_registered=
-account.6.sip_server.1.invite_retry_counts=
-
-account.6.outbound_proxy.2.register_on_enable=
-account.6.outbound_proxy.2.failback_timeout=
-account.6.outbound_proxy.2.failback_mode=
-account.6.outbound_proxy.2.retry_counts=
-account.6.outbound_proxy.2.only_signal_with_registered=
-account.6.outbound_proxy.2.failback_subscribe.enable=
-account.6.outbound_proxy.2.invite_retry_counts=
-
-account.6.sip_server.2.register_on_enable=
-account.6.sip_server.2.failback_timeout=
-account.6.sip_server.2.failback_mode=
-account.6.sip_server.2.failback_subscribe.enable=
-account.6.sip_server.2.only_signal_with_registered=
-account.6.sip_server.2.invite_retry_counts=
-
-account.6.static_cache_pri=
-account.6.dns_cache_type=
-account.6.naptr_build=
-account.6.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
-account.6.fallback.redundancy_type=
-account.6.reg_failed_retry_max_time=
-account.6.reg_failed_retry_min_time=
-account.6.redundancy_with_reg_fail.enable =
-
-
 ################################################################
 #                        SIP Basic config                     ##
 ################################################################
@@ -944,17 +269,6 @@ account.1.picture_info_enable=
 #######################################################################################
 account.1.missed_calllog=
 
-account.2.missed_calllog=
-
-account.3.missed_calllog=
-
-account.4.missed_calllog=
-
-account.5.missed_calllog=
-
-account.6.missed_calllog=
-
-
 #######################################################################################  
 ##                                  Forward                                          ##  
 ####################################################################################### 
@@ -992,36 +306,6 @@ account.1.subscribe_mwi_to_vm=
 account.1.subscribe_mwi_expires=
 account.1.display_mwi.enable=
 
-voice_mail.number.2= {$voicemail_number}
-account.2.subscribe_mwi=
-account.2.subscribe_mwi_to_vm=
-account.2.subscribe_mwi_expires=
-account.2.display_mwi.enable=
-
-voice_mail.number.3= {$voicemail_number}
-account.3.subscribe_mwi=
-account.3.subscribe_mwi_to_vm=
-account.3.subscribe_mwi_expires=
-account.3.display_mwi.enable=
-
-voice_mail.number.4= {$voicemail_number}
-account.4.subscribe_mwi=
-account.4.subscribe_mwi_to_vm=
-account.4.subscribe_mwi_expires=
-account.4.display_mwi.enable=
-
-voice_mail.number.5= {$voicemail_number}
-account.5.subscribe_mwi=
-account.5.subscribe_mwi_to_vm=
-account.5.subscribe_mwi_expires=
-account.5.display_mwi.enable=
-
-voice_mail.number.6= {$voicemail_number}
-account.6.subscribe_mwi=
-account.6.subscribe_mwi_to_vm=
-account.6.subscribe_mwi_expires=
-account.6.display_mwi.enable=
-
 #######################################################################################  
 ##                               Auto Dial                                           ##  
 #######################################################################################
@@ -1029,37 +313,12 @@ account.6.display_mwi.enable=
 account.1.auto_dial_enable=
 account.1.auto_dial_num=
 
-account.2.auto_dial_enable=
-account.2.auto_dial_num=
-
-account.3.auto_dial_enable=
-account.3.auto_dial_num=
-
-account.4.auto_dial_enable=
-account.4.auto_dial_num=
-
-account.5.auto_dial_enable=
-account.5.auto_dial_num=
-
-account.6.auto_dial_enable=
-account.6.auto_dial_num=
-
 #######################################################################################
 ##                           Preference&Status                                       ##       
 #######################################################################################
 
 account.1.ringtone.ring_type=
 
-account.2.ringtone.ring_type=
-
-account.3.ringtone.ring_type=
-
-account.4.ringtone.ring_type=
-
-account.5.ringtone.ring_type=
-
-account.6.ringtone.ring_type=
-
 #######################################################################################
 ##                           Digitmap                                                ##       
 #######################################################################################
@@ -1082,17 +341,6 @@ account.1.dialplan.digitmap.active.on_hook_dialing=
 
 account.1.alert_info_url_enable=
 
-account.2.alert_info_url_enable=
-
-account.3.alert_info_url_enable=
-
-account.4.alert_info_url_enable=
-
-account.5.alert_info_url_enable=
-
-account.6.alert_info_url_enable=
-
-
 #######################################################################################
 ##                                  BLF/BLF List                                     ##       
 #######################################################################################
@@ -1106,50 +354,7 @@ account.1.blf.match_host.enable=
 account.1.out_dialog_blf_enable=
 account.1.blf.subscribe_event=
 
-account.2.blf.blf_list_uri=
-account.2.blf_list_barge_in_code=
-account.2.blf_list_code=
-account.2.blf_list_retrieve_call_parked_code=
-account.2.blf.subscribe_period=
-account.2.blf.match_host.enable=
-account.2.out_dialog_blf_enable=
-account.2.blf.subscribe_event=
 
-account.3.blf.blf_list_uri=
-account.3.blf_list_barge_in_code=
-account.3.blf_list_code=
-account.3.blf_list_retrieve_call_parked_code=
-account.3.blf.subscribe_period=
-account.3.blf.match_host.enable=
-account.3.out_dialog_blf_enable=
-account.3.blf.subscribe_event=
-
-account.4.blf.blf_list_uri=
-account.4.blf_list_barge_in_code=
-account.4.blf_list_code=
-account.4.blf_list_retrieve_call_parked_code=
-account.4.blf.subscribe_period=
-account.4.blf.match_host.enable=
-account.4.out_dialog_blf_enable=
-account.4.blf.subscribe_event=
-
-account.5.blf.blf_list_uri=
-account.5.blf_list_barge_in_code=
-account.5.blf_list_code=
-account.5.blf_list_retrieve_call_parked_code=
-account.5.blf.subscribe_period=
-account.5.blf.match_host.enable=
-account.5.out_dialog_blf_enable=
-account.5.blf.subscribe_event=
-
-account.6.blf.blf_list_uri=
-account.6.blf_list_barge_in_code=
-account.6.blf_list_code=
-account.6.blf_list_retrieve_call_parked_code=
-account.6.blf.subscribe_period=
-account.6.blf.match_host.enable=
-account.6.out_dialog_blf_enable=
-account.6.blf.subscribe_event=
 
 #######################################################################################
 ##                                   SCA                                             ##       
@@ -1162,41 +367,6 @@ account.1.shared_line_one_touch_retrieve.enable=
 account.1.sca_manage_interface_display_time=
 account.1.shared_line_callpull_code=
 
-account.2.shared_line = {$shared_line_1}
-account.2.line_seize.expires=
-account.2.shared_line_one_touch_bargein.enable=
-account.2.shared_line_one_touch_retrieve.enable=
-account.2.sca_manage_interface_display_time=
-account.2.shared_line_callpull_code=
-
-account.3.shared_line = {$shared_line_1}
-account.3.line_seize.expires=
-account.3.shared_line_one_touch_bargein.enable=
-account.3.shared_line_one_touch_retrieve.enable=
-account.3.sca_manage_interface_display_time=
-account.3.shared_line_callpull_code=
-
-account.4.shared_line = {$shared_line_1}
-account.4.line_seize.expires=
-account.4.shared_line_one_touch_bargein.enable=
-account.4.shared_line_one_touch_retrieve.enable=
-account.4.sca_manage_interface_display_time=
-account.4.shared_line_callpull_code=
-
-account.5.shared_line = {$shared_line_1}
-account.5.line_seize.expires=
-account.5.shared_line_one_touch_bargein.enable=
-account.5.shared_line_one_touch_retrieve.enable=
-account.5.sca_manage_interface_display_time=
-account.5.shared_line_callpull_code=
-
-account.6.shared_line = {$shared_line_1}
-account.6.line_seize.expires=
-account.6.shared_line_one_touch_bargein.enable=
-account.6.shared_line_one_touch_retrieve.enable=
-account.6.sca_manage_interface_display_time=
-account.6.shared_line_callpull_code=
-
 #######################################################################################
 ##                                   BLA                                             ##       
 #######################################################################################
@@ -1210,9 +380,6 @@ account.1.bla.subscribe_uri_build_type=
 #######################################################################################
 account.1.callpark_enable=
 
-
-
-
 #######################################################################################
 ##                                Call Pickup                                        ##       
 #######################################################################################