mirror of
https://github.com/fusionpbx/fusionpbx.git
synced 2025-12-30 00:53:50 +00:00
Remove extra white spaces and a few other adjustments for the Yealinks phones.
This commit is contained in:
Mark Crane
@@ -1059,6 +1059,9 @@ features.pickup.blf_audio_enable =
|
||||
#0-Disabled (default), 1-Enabled;
|
||||
features.blf_and_callpark_idle_led_enable =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
#features.factory_pwd_enable =
|
||||
|
||||
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
||||
phone_setting.inter_digit_time =
|
||||
|
||||
|
||||
@@ -1059,6 +1059,9 @@ features.pickup.blf_audio_enable =
|
||||
#0-Disabled (default), 1-Enabled;
|
||||
features.blf_and_callpark_idle_led_enable =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
features.factory_pwd_enable =
|
||||
|
||||
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
||||
phone_setting.inter_digit_time =
|
||||
|
||||
|
||||
@@ -1059,6 +1059,9 @@ features.pickup.blf_audio_enable =
|
||||
#0-Disabled (default), 1-Enabled;
|
||||
features.blf_and_callpark_idle_led_enable =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
#features.factory_pwd_enable = 1
|
||||
|
||||
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
||||
phone_setting.inter_digit_time =
|
||||
|
||||
|
||||
@@ -1059,8 +1059,8 @@ features.pickup.blf_audio_enable =
|
||||
#0-Disabled (default), 1-Enabled;
|
||||
features.blf_and_callpark_idle_led_enable =
|
||||
|
||||
#Enable or disable reset by long press on OK key. 0-Disable 1-Enable(Defautl)
|
||||
#features.reset_by_long_press_enable = 0
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
#features.factory_pwd_enable = 1
|
||||
|
||||
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
||||
phone_setting.inter_digit_time =
|
||||
|
||||
@@ -16,7 +16,7 @@ network.internet_port.ip =
|
||||
network.internet_port.mask =
|
||||
network.internet_port.gateway =
|
||||
network.primary_dns=
|
||||
network.secondary_dns =
|
||||
network.secondary_dns =
|
||||
|
||||
#Configure the username and password for PPPOE connection.
|
||||
#Require reboot;
|
||||
@@ -25,7 +25,7 @@ network.pppoe.password =
|
||||
|
||||
#Configure the PC port type; 0-Router, 1-Bridge (default);
|
||||
#Require reboot;
|
||||
network.bridge_mode =
|
||||
network.bridge_mode =
|
||||
|
||||
#Configure the IP address and mask when the PC port is configured as Router.
|
||||
#Require reboot;
|
||||
@@ -42,27 +42,27 @@ network.dhcp.end_ip =
|
||||
|
||||
#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled;
|
||||
#Require reboot;
|
||||
network.vlan.internet_port_enable =
|
||||
network.vlan.internet_port_enable =
|
||||
|
||||
#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
|
||||
#Require reboot;
|
||||
network.vlan.internet_port_vid =
|
||||
network.vlan.internet_port_vid =
|
||||
|
||||
#Configure the VLAN priority, it ranges from 0 (default) to 7.
|
||||
#Require reboot;
|
||||
network.vlan.internet_port_priority =
|
||||
|
||||
#Require reboot;
|
||||
network.vlan.internet_port_priority =
|
||||
|
||||
#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled;
|
||||
#Require reboot;
|
||||
network.vlan.pc_port_enable =
|
||||
network.vlan.pc_port_enable =
|
||||
|
||||
#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
|
||||
#Require reboot;
|
||||
network.vlan.pc_port_vid =
|
||||
network.vlan.pc_port_vid =
|
||||
|
||||
#Configure the VLAN priority, it ranges from 0 (default) to 7.
|
||||
#Require reboot;
|
||||
network.vlan.pc_port_priority =
|
||||
network.vlan.pc_port_priority =
|
||||
|
||||
#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only;
|
||||
#Require reboot;
|
||||
@@ -590,7 +590,7 @@ programablekey.1.history_type =
|
||||
programablekey.1.label =
|
||||
|
||||
##########################################################################################
|
||||
## Expansion Key £¨For T38G only£© ##
|
||||
## Expansion Key £¨For T38G only£© ##
|
||||
##########################################################################################
|
||||
#X ranges from 1 to 6, Y ranges from 1 to 39.
|
||||
#expansion_module.x.key.y.type = 37 (Switch by default)
|
||||
@@ -1057,10 +1057,10 @@ features.pickup.blf_audio_enable =
|
||||
|
||||
#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle.
|
||||
#0-Disabled (default), 1-Enabled;
|
||||
features.blf_and_callpark_idle_led_enable =
|
||||
features.blf_and_callpark_idle_led_enable = 1
|
||||
|
||||
#Enable or disable reset by long press on OK key. 0-Disable 1-Enable(Defautl)
|
||||
#features.reset_by_long_press_enable = 0
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
features.factory_pwd_enable = 1
|
||||
|
||||
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
||||
phone_setting.inter_digit_time =
|
||||
@@ -1075,7 +1075,7 @@ phone_setting.lock =
|
||||
phone_setting.phone_lock.unlock_pin =
|
||||
phone_setting.phone_lock.lock_time_out =
|
||||
|
||||
#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wav¡¡Ring8.wav.
|
||||
#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wav - Ring8.wav.
|
||||
#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav
|
||||
phone_setting.ring_type =
|
||||
|
||||
|
||||
@@ -237,7 +237,7 @@ account.1.advanced.timer_t1 =
|
||||
account.1.advanced.timer_t2 =
|
||||
account.1.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.1.ringtone.ring_type =
|
||||
@@ -550,7 +550,7 @@ account.2.advanced.timer_t1 =
|
||||
account.2.advanced.timer_t2 =
|
||||
account.2.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.2.ringtone.ring_type =
|
||||
@@ -863,7 +863,7 @@ account.3.advanced.timer_t1 =
|
||||
account.3.advanced.timer_t2 =
|
||||
account.3.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.3.ringtone.ring_type =
|
||||
@@ -1176,7 +1176,7 @@ account.4.advanced.timer_t1 =
|
||||
account.4.advanced.timer_t2 =
|
||||
account.4.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.4.ringtone.ring_type =
|
||||
@@ -1490,7 +1490,7 @@ account.5.advanced.timer_t1 =
|
||||
account.5.advanced.timer_t2 =
|
||||
account.5.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.5.ringtone.ring_type =
|
||||
@@ -1801,7 +1801,7 @@ account.6.advanced.timer_t1 =
|
||||
account.6.advanced.timer_t2 =
|
||||
account.6.advanced.timer_t4 =
|
||||
|
||||
#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,¡¡Ring8.wav.
|
||||
#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav - Ring8.wav.
|
||||
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav
|
||||
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav
|
||||
account.6.ringtone.ring_type =
|
||||
@@ -1924,9 +1924,11 @@ forward.international.enable =
|
||||
#Configure Line Key {$row.device_key_id}
|
||||
linekey.{$row.device_key_id}.line = {$row.device_key_line}
|
||||
linekey.{$row.device_key_id}.value = {$row.device_key_value}
|
||||
{if $row.device_key_category == "blf"}
|
||||
linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
|
||||
{/if}
|
||||
linekey.{$row.device_key_id}.type = {$row.device_key_type}
|
||||
linekey.{$row.device_key_id}.xml_phonebook =
|
||||
#linekey.{$row.device_key_id}.xml_phonebook =
|
||||
linekey.{$row.device_key_id}.label = {$row.device_key_label}
|
||||
|
||||
{/if}
|
||||
@@ -1956,10 +1958,12 @@ linekey.{$row.device_key_id}.label = {$row.device_key_label}
|
||||
memorykey.{$row.device_key_id}.type = {$row.device_key_type}
|
||||
memorykey.{$row.device_key_id}.line = {$row.device_key_line}
|
||||
memorykey.{$row.device_key_id}.value = {$row.device_key_value}
|
||||
{if $row.device_key_category == "blf"}
|
||||
memorykey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
|
||||
{/if}
|
||||
memorykey.{$row.device_key_id}.label = {$row.device_key_label}
|
||||
memorykey.{$row.device_key_id}.xml_phonebook =
|
||||
memorykey.{$row.device_key_id}.sub_type =
|
||||
#memorykey.{$row.device_key_id}.xml_phonebook =
|
||||
#memorykey.{$row.device_key_id}.sub_type =
|
||||
|
||||
{/if}
|
||||
{/foreach}
|
||||
@@ -2009,7 +2013,9 @@ programablekey.1.label =
|
||||
expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type}
|
||||
expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line}
|
||||
expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value}
|
||||
{if $row.device_key_category == "blf"}
|
||||
expansion_module.1.key.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
|
||||
{/if}
|
||||
expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label}
|
||||
expansion_module.1.key.{$row.device_key_id}.xml_phonebook =
|
||||
|
||||
@@ -2024,7 +2030,9 @@ expansion_module.1.key.{$row.device_key_id}.xml_phonebook =
|
||||
#expansion_module.2.key.1.type = {$key_type_1}
|
||||
#expansion_module.2.key.1.line = {$key_id_1}
|
||||
#expansion_module.2.key.1.value = {$key_value_1}
|
||||
{if $row.device_key_category == "blf"}
|
||||
#expansion_module.2.key.1.pickup_value =
|
||||
{/if}
|
||||
#expansion_module.2.key.1.label = {$key_label_1}
|
||||
#expansion_module.2.key.1.xml_phonebook =
|
||||
#expansion_module.2.key.1.type = 37
|
||||
|
||||
@@ -584,7 +584,7 @@ features.relog_offtime =
|
||||
features.ringer_device.is_use_headset =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
features.factory_pwd_enable =
|
||||
#features.factory_pwd_enable = 1
|
||||
|
||||
features.idle_talk_power_led_flash_enable =
|
||||
|
||||
@@ -761,9 +761,6 @@ features.pickup.direct_pickup_code =
|
||||
features.pickup.blf_visual_enable =
|
||||
features.pickup.blf_audio_enable =
|
||||
|
||||
#Enable or disable reset by long press on OK key. 0-Disable 1-Enable(Defautl)
|
||||
#features.reset_by_long_press_enable = 0
|
||||
|
||||
#######################################################################################
|
||||
## Phone Setting ##
|
||||
#######################################################################################
|
||||
@@ -837,6 +834,15 @@ phone_setting.phone_lock.lock_time_out =
|
||||
#Configure the keypad lock type;0-All Keys(default), 1-Function Key, 2-Menu Key
|
||||
phone_setting.phone_lock.lock_key_type =
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t42g_wallpaper}
|
||||
phone_setting.backgrounds = Config:yealink_t42g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Multicast ##
|
||||
#######################################################################################
|
||||
@@ -1487,15 +1493,6 @@ custom_softkey_talking.url =
|
||||
#######################################################################################
|
||||
local_contact.data_photo_tar.url =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t42g_wallpaper}
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
phone_setting.backgrounds = Config:yealink_t42g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Call List ##
|
||||
#######################################################################################
|
||||
|
||||
@@ -584,7 +584,7 @@ features.relog_offtime =
|
||||
features.ringer_device.is_use_headset =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
features.factory_pwd_enable =
|
||||
#features.factory_pwd_enable = 1
|
||||
|
||||
features.idle_talk_power_led_flash_enable =
|
||||
|
||||
@@ -761,9 +761,6 @@ features.pickup.direct_pickup_code =
|
||||
features.pickup.blf_visual_enable =
|
||||
features.pickup.blf_audio_enable =
|
||||
|
||||
#Enable or disable reset by long press on OK key. 0-Disable 1-Enable(Defautl)
|
||||
#features.reset_by_long_press_enable = 0
|
||||
|
||||
#######################################################################################
|
||||
## Phone Setting ##
|
||||
#######################################################################################
|
||||
@@ -837,6 +834,15 @@ phone_setting.phone_lock.lock_time_out =
|
||||
#Configure the keypad lock type;0-All Keys(default), 1-Function Key, 2-Menu Key
|
||||
phone_setting.phone_lock.lock_key_type =
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t46g_wallpaper}
|
||||
phone_setting.backgrounds = Config:yealink_t46g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Multicast ##
|
||||
#######################################################################################
|
||||
@@ -1487,15 +1493,6 @@ custom_softkey_talking.url =
|
||||
#######################################################################################
|
||||
local_contact.data_photo_tar.url =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t46g_wallpaper}
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
phone_setting.backgrounds = Config:yealink_t46g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Call List ##
|
||||
#######################################################################################
|
||||
|
||||
@@ -584,7 +584,7 @@ features.relog_offtime =
|
||||
features.ringer_device.is_use_headset =
|
||||
|
||||
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
||||
features.factory_pwd_enable =
|
||||
#features.factory_pwd_enable = 1
|
||||
|
||||
features.idle_talk_power_led_flash_enable =
|
||||
|
||||
@@ -761,9 +761,6 @@ features.pickup.direct_pickup_code =
|
||||
features.pickup.blf_visual_enable =
|
||||
features.pickup.blf_audio_enable =
|
||||
|
||||
#Enable or disable reset by long press on OK key. 0-Disable 1-Enable(Defautl)
|
||||
#features.reset_by_long_press_enable = 0
|
||||
|
||||
#######################################################################################
|
||||
## Phone Setting ##
|
||||
#######################################################################################
|
||||
@@ -837,6 +834,15 @@ phone_setting.phone_lock.lock_time_out =
|
||||
#Configure the keypad lock type;0-All Keys(default), 1-Function Key, 2-Menu Key
|
||||
phone_setting.phone_lock.lock_key_type =
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t48g_wallpaper}
|
||||
phone_setting.backgrounds = Config:yealink_t48g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Multicast ##
|
||||
#######################################################################################
|
||||
@@ -1487,15 +1493,6 @@ custom_softkey_talking.url =
|
||||
#######################################################################################
|
||||
local_contact.data_photo_tar.url =
|
||||
|
||||
#######################################################################################
|
||||
## Wallpaper ##
|
||||
#######################################################################################
|
||||
wallpaper_upload.url = {$yealink_t46g_wallpaper}
|
||||
|
||||
#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
|
||||
phone_setting.backlight_time =
|
||||
phone_setting.backgrounds = Config:yealink_t46g_wallpaper.png
|
||||
|
||||
#######################################################################################
|
||||
## Call List ##
|
||||
#######################################################################################
|
||||
|
||||
@@ -31,8 +31,8 @@ network.vlan.dhcp_enable =
|
||||
#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255.
|
||||
#Multiple options separated by a comma. It supports up to 5 options in all.
|
||||
#Require reboot;
|
||||
network.vlan.dhcp_option =
|
||||
|
||||
network.vlan.dhcp_option =
|
||||
|
||||
#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535.
|
||||
#Require reboot;
|
||||
network.port.http =
|
||||
|
||||
Reference in New Issue
Block a user