nsinnovations/fusionpbx
2
0
Fork 0
mirror of https://github.com/fusionpbx/fusionpbx.git synced 2026-01-06 11:43:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
d11ebf2e2d5b0ac8b5d20222e48b92d3bdcffc33
fusionpbx/resources/templates/provision/grandstream/gxw410x/{$mac}.xml

640 lines
29 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="utf-8"?>
<gs_provision version="1">
<config version="1">
<!-- Configuration template for GXW410x version 1.3.4.13 -->
<!-- Advanced/System-wide Options -->
<!-- Admin password for web interface, max. length is 30 -->
<P2>{$admin_password}</P2>
<!-- End User Password, MaxLength 32 -->
<P196>{$user_password}</P196>
<!-- G.723 rate: 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<P49>0</P49>
<!-- Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively) -->
<P37>2</P37>
<!-- Layer 3 QoS (IP Diff-Serv or Precedence value for RTP) -->
<P38>48</P38>
<!-- Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP) -->
<P51>0</P51>
<!-- Layer 2 QoS. 802.1p priority value (0 - 7) -->
<P87>0</P87>
<!-- Local RTP port (1024-65535, default 5004) -->
<P39>5004</P39>
<!-- Use Random Port. 0 - no, 1 - yes -->
<P78>0</P78>
<!-- Keep-alive interval (in seconds. default 20 seconds) -->
<P84>20</P84>
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. -->
<P101></P101>
<!-- STUN server -->
<P76></P76>
<!-- Firmware Upgrade -->
<!-- Firmware Upgrade. 0 - TFTP Upgrade, 1 - HTTP Upgrade. -->
<P212>1</P212>
<!-- Firmware Server Path -->
<P192>fm.grandstream.com/gs</P192>
<!-- Config Server Path -->
<P237>{$domain_name}{$project_path}/app/provision</P237>
<!-- Firmware File Prefix -->
<P232></P232>
<!-- Firmware File Postfix -->
<P233></P233>
<!-- Config File Prefix -->
<P234></P234>
<!-- Config File Postfix -->
<P235></P235>
<!-- Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes. -->
<!-- When set to Yes(1), it will override the configured provision path and method. -->
<P145>1</P145>
<!-- Automatic Upgrade. 0 - No, 1 - Yes. Default is No. -->
<P194>0</P194>
<!-- Check for new firmware every () minutes, unit is in minute, minimnu 60 minutes, default is 7 days. -->
<P193>10080</P193>
<!-- Use firmware pre/postfix to determine if f/w is required -->
<!-- 0 = Always Check for New Firmware -->
<!-- 1 = Check New Firmware only when F/W pre/suffix changes -->
<!-- 2 = Always Skip the Firmware Check -->
<P238>0</P238>
<!-- DTMF Payload Type -->
<P79>101</P79>
<!-- Syslog Server (name of the server, max length is 64 charactors) -->
<P207></P207>
<!-- Syslog Level (Default setting is NONE) -->
<!-- 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR -->
<P208>0</P208>
<!-- NTP Server -->
<P30>us.pool.ntp.org</P30>
<!-- Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No. -->
<!-- When set to Yes(1), it will override the configured NTP server. -->
<P144>0</P144>
<!-- Enable Video Surveillance -->
<!-- 0 - No, 1 - Yes -->
<P928>0</P928>
<!-- RTSP Port -->
<P929>554</P929>
<!-- RTP Loopback. 0 - No, 1 - Yes. (No as default, Yes means no RTP if RTP streams between 2 internal ports) -->
<!-- P3598 = 0 -->
<!-- Profile 1 Settings -->
<!-- Activate Profile 0 - no, 1 - yes -->
<P271>1</P271>
<!-- Profile Name -->
<P270></P270>
<!-- SIP Server: max. length = 96 -->
<P47>{$server_address_1}</P47>
<!-- Outbound Proxy -->
<P48></P48>
<!-- Use DNS SRV. 0 - No, 1 - Yes. -->
<P103>0</P103>
<!-- SIP User ID is phone number. 0 - no, 1 - yes -->
<P63>0</P63>
<!-- SIP Registration. 0 - no, 1 - yes -->
<P31>1</P31>
<!-- Unregister On Reboot. 0 - no, 1 - yes -->
<P81>0</P81>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<P32>3</P32>
<!-- Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 20) -->
<P138>20</P138>
<!-- SIP Transport. 1 - UDP, 2 - TCP , (default is UDP) -->
<P130>1</P130>
<!-- NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive -->
<P52>1</P52>
<!-- Proxy-Require (A SIP extension to enable firewall penetration) -->
<P197></P197>
<!-- Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes -->
<P29>0</P29>
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<P260>180</P260>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<P261>90</P261>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<P262>0</P262>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<P263>0</P263>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<P264>0</P264>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<P265>0</P265>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<P266>0</P266>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<P267>1</P267>
<!-- Enable 100rel . 0 - no, 1 - yes -->
<P272>0</P272>
<!-- Refer to Uses Target Contact -->
<!-- 0 - No, 1 - Yes -->
<P135>0</P135>
<!-- INVITE Ring-no-anwser Timeout -->
<P3180>40</P3180>
<!-- Accept INVITE from Proxy Only (100 %u2013No; 101-YES, default YES) -->
<P743>101</P743>
<!-- Codec/Voice Quality settings -->
<!-- First codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P57>0</P57>
<!-- Second codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P58>3</P58>
<!-- Third codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P59>4</P59>
<!-- Forth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P60>8</P60>
<!-- Fifth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P61>18</P61>
<!-- Sixth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P62>0</P62>
<!-- Seventh codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P46>0</P46>
<!-- Eighth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P98>0</P98>
<!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK -->
<P198>100</P198>
<!-- Profile 2 Settings -->
<!-- Activate Profile 0 - no, 1 - yes -->
<P401>0</P401>
<!-- Profile Name -->
<P417></P417>
<!-- SIP Server -->
<P402>{$server_address_2}</P402>
<!-- Outbound Proxy Server -->
<P403></P403>
<!-- Use DNS SRV. 0 - No, 1 - Yes. -->
<P408>0</P408>
<!-- User ID is phone number; "user=phone". 0 - no, 1 - yes -->
<P409>0</P409>
<!-- SIP Registration. 0 - no, 1 - yes -->
<P410>1</P410>
<!-- Unregister on Reboot. 0 - no, 1 - yes -->
<P411>0</P411>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<P412>3</P412>
<!-- Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 20) -->
<P471>20</P471>
<!-- SIP Transport. 1 - UDP, 2 - TCP , (default is UDP) -->
<P448>1</P448>
<!-- NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive -->
<P414>1</P414>
<!-- Proxy Require -->
<P418></P418>
<!-- Early Dial. 0 - no, 1 - yes -->
<P422>0</P422>
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<P434>180</P434>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<P427>90</P427>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<P428>0</P428>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<P429>0</P429>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<P430>0</P430>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<P431>0</P431>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<P432>0</P432>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<P433>1</P433>
<!-- Enable 100rel. 0 - no, 1 - yes -->
<P435>0</P435>
<!-- Refer to Uses Target Contact -->
<!-- 0 - No, 1 - Yes -->
<P469>0</P469>
<!-- INVITE Ring-no-answer Timeout -->
<P3181>40</P3181>
<!-- Accept INVITE from Proxy Only (100 %u2013No; 101-YES, default YES) -->
<P4043>101</P4043>
<!-- First codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P451>0</P451>
<!-- Second codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P452>3</P452>
<!-- Third codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P453>4</P453>
<!-- Forth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P454>8</P454>
<!-- Fifth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P455>18</P455>
<!-- Sixth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P456>0</P456>
<!-- Seventh codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P457>0</P457>
<!-- Eighth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P458>0</P458>
<!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK -->
<P424>100</P424>
<!-- Profile 3 Settings -->
<!-- Activate Profile 0 - no, 1 - yes -->
<P501>0</P501>
<!-- Profile Name -->
<P517></P517>
<!-- SIP Server -->
<P502>{$server_address_3}</P502>
<!-- Outbound Proxy Server -->
<P503></P503>
<!-- Use DNS SRV. 0 - No, 1 - Yes. -->
<P508>0</P508>
<!-- User ID is phone. "user=phone". 0 - no, 1 - yes -->
<P509>0</P509>
<!-- SIP Registration. 0 - no, 1 - yes -->
<P510>1</P510>
<!-- Unregister on Reboot. 0 - no, 1 - yes -->
<P511>0</P511>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<P512>3</P512>
<!-- Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 20) -->
<P571>20</P571>
<!-- SIP Transport. 1 - UDP, 2 - TCP , (default is UDP) -->
<P548>1</P548>
<!-- NAT Traversal. 0 - yes, 1 - no -->
<P514>1</P514>
<!-- Proxy Require -->
<P518></P518>
<!-- Early Dial. 0 - no, 1 - yes -->
<P522>0</P522>
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<P534>180</P534>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<P527>90</P527>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<P528>0</P528>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<P529>0</P529>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<P530>0</P530>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<P531>0</P531>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<P532>0</P532>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<P533>1</P533>
<!-- Enable 100rel. 0 - no, 1 - yes -->
<P535>0</P535>
<!-- Refer to Uses Target Contact -->
<!-- 0 - No, 1 - Yes -->
<P569>0</P569>
<!-- INVITE Ring-no-anwser Timeout -->
<P3182>40</P3182>
<!-- Accept INVITE from Proxy Only (100 %u2013No; 101-YES, default YES) -->
<P4044>101</P4044>
<!-- Codec/Voice Quality settings -->
<!-- First codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P551>0</P551>
<!-- Second codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P552>3</P552>
<!-- Third codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P553>4</P553>
<!-- Forth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P554>8</P554>
<!-- Fifth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P555>18</P555>
<!-- Sixth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P556>0</P556>
<!-- Seventh codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P557>0</P557>
<!-- Eighth codec. 0 - PCMU, 3 - GSM, 4 - G.723.1, 8 - PCMA, 18 - G.729A/B -->
<P558>0</P558>
<!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102 - BroadSoft, 104 - Sonus, 108 - CBCOM, 109 - RNK -->
<P524>100</P524>
<!-- FXO Lines Settings -->
<!-- FXO Termination -->
<!-- Enable Current Disconnect -->
<!-- N - No, Y - Yes -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3603 = ch1-4:Y; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3603 = ch1-8:Y; -->
<!-- Enable Current Disconnect Threshold. Default 100, normally 100 ~ 800ms. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3604 = ch1-4:100; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3604 = ch1-8:100; -->
<!-- Enable Tone Disconnect. N - No, Y - Yes. -->
<!-- If set yes, reorder tone is used as disconnect signal. Default No. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3605 = ch1-4:Y; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3605 = ch1-8:Y; -->
<!-- Enable Polarity Reversal. N - No, Y - Yes. -->
<!-- Default No. Check with your PSTN carrier before set to Yes -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3606 = ch1-4:N; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3606 = ch1-8:N; -->
<!-- Enable Call Answer Supervision. N - No, Y - Yes. -->
<!-- Default No. Check with your PSTN carrier before set to Yes -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3629 = ch1-4:N; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3629 = ch1-8:N; -->
<!-- Silence Timeout. Default 60 seconds. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3202 = ch1-4:60; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3202 = ch1-8:60; -->
<!-- Incoming Call Ring Timeout. Allowed value: 2-10s, default 6s. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3630 = ch1-4:6; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3630 = ch1-8:6; -->
<!-- AC Termination Impedance -->
<!-- 0 - 600 Ohm ( North American ) -->
<!-- 1 - 900 Ohm -->
<!-- 2 - 270 Ohm + (750 Ohm || 150nF) and 275 Ohm + (780 Ohm || 150nF) -->
<!-- 3 - 220 Ohm + (820 Ohm || 120nF) and 220 Ohm + (820 Ohm || 115nF) -->
<!-- 4 - 370 Ohm + (620 Ohm || 310nF) -->
<!-- 5 - 320 Ohm + (1050 Ohm || 230nF) -->
<!-- 6 - 370 Ohm + (820 Ohm || 110nF) -->
<!-- 7 - 275 Ohm + (78 Ohm || 150 nF) -->
<!-- 8 - 120 Ohm + (820 Ohm || 110 nF) -->
<!-- 9 - 350 Ohm + (1000 Ohm || 210nF) -->
<!-- 10 - 0 Ohm + (900 Ohm || 30nF) -->
<!-- 11 - 600 Ohm + 2.16 uF -->
<!-- 12 - 900 Ohm + 1 uF -->
<!-- 13 - 900 Ohm + 2.16 uF -->
<!-- 14 - 600 Ohm + 1 uF -->
<!-- 15 - Global complex impedance -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3631 = ch1-4:0; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3631 = ch1-8:0; -->
<!-- Channel Dialing to PSTN -->
<!-- Wait for Dial Tone (Y/N). 0 - No, 1 - Yes. Default Yes - dial upon dial-tone -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3303 = ch1-4:N; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3303 = ch1-8:N; -->
<!-- Stage Method(1/2). Default 2 - 2 stage dialing. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3304 = ch1-4:2; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3304 = ch1-8:2; -->
<!-- Min Delay Before Dial PSTN. Default 500, range 50 ~ 6500ms. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3206 = ch1-4:500; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3206 = ch1-8:500; -->
<!-- Unconditional Call Forward to VOIP. -->
<!-- User ID -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3607 = ch1-4:; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3607 = ch1-8:; -->
<!-- SIP Server. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3306 = ch1-4:p1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3306 = ch1-8:p1; -->
<!-- Sip Destination Port. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3307 = ch1-4:5060; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3307 = ch1-8:5060; -->
<!-- PSTN to VoIP Caller ID Setting -->
<!-- Number of Rings Before Pickup. Default 4. Allowed values: 1-50. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3599 = ch1-4:4; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3599 = ch1-8:4; -->
<!-- Caller ID Scheme -->
<!-- 1:Bellcore/Telcordia, 2:ETSI-FSK during ringing, 3:ETSI-FSK prior to ringing with DTAS -->
<!-- 4:ETSI-FSK prior to ringing with LR, 5:ETSI-FSK prior to ringing with RP, 6:ETSI-DTMF during ringing -->
<!-- 7:ETSI-DTMF prior to ringing with DTAS, 8:ETSI-DTMF prior to ringing with LR -->
<!-- 9:ETSI-DTMF prior to ringing with RP, 10:SIN 227 BT, 11: NTT -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3600 = ch1-4:1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3600 = ch1-8:1; -->
<!-- Caller ID Transport Type. Default 1. -->
<!-- 1:Relay via SIP From, 2:Disable, 3:Send Anonymous, 4:Relay via SIP P-Asserted-Identity -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3601 = ch1-4:1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3601 = ch1-8:1; -->
<!-- T.38 Setting -->
<!-- Syntax: ch x-y: mode=val,rate=val,ecm=val;[...] -->
<!-- (mode: 1:Relay(default), 2:Passthough) -->
<!-- (rate: 2400, 4800, 7200, 9600(default), 12000, 14400) -->
<!-- (ecm: 1:Enable(default), 0:Disable) -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3602 = ch1-4:mode=1,rate=9600,ecm=1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3602 = ch1-8:mode=1,rate=9600,ecm=1; -->
<!-- Channels Page -->
<!-- Phone Number Settings -->
<!-- FXO Port 1 -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<P3030></P3030>
<P3060>{$user_id_1}</P3060>
<P3090>{$user_id_1}</P3090>
<P3120>{$user_password_1}</P3120>
<P3150>3000</P3150>
<!-- FXO Port 2 -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<P3031></P3031>
<P3061>{$user_id_2}</P3061>
<P3091>{$user_id_2}</P3091>
<P3121>{$user_password_2}</P3121>
<P3151>3000</P3151>
<!-- FXO Port 3 -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<P3032></P3032>
<P3062>{$user_id_3}</P3062>
<P3092>{$user_id_3}</P3092>
<P3122>{$user_password_3}</P3122>
<P3152>3000</P3152>
<!-- FXO Port 4 -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<P3033></P3033>
<P3063>{$user_id_4}</P3063>
<P3093>{$user_id_4}</P3093>
<P3123>{$user_password_4}</P3123>
<P3153>3000</P3153>
<!-- FXO Port 5 (Uncomment the following P-values if using GXW4108) -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<!-- P3034 = -->
<!-- P3064 = -->
<!-- P3094 = -->
<!-- P3124 = -->
<!-- P3154 = -->
<!-- FXO Port 6 (Uncomment the following P-values if using GXW4108) -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<!-- P3035 = -->
<!-- P3065 = -->
<!-- P3095 = -->
<!-- P3125 = -->
<!-- P3155 = -->
<!-- FXO Port 7 (Uncomment the following P-values if using GXW4108) -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<!-- P3036 = -->
<!-- P3066 = -->
<!-- P3096 = -->
<!-- P3126 = -->
<!-- P3156 = -->
<!-- FXO Port 8 (Uncomment the following P-values if using GXW4108) -->
<!-- Channel(s), SIP USER ID, Authenticate ID, Password, Profile ID (3000 - Profile 1, 3001 - Profile 2, 3003 - Profile 3) -->
<!-- P3037 = -->
<!-- P3067 = -->
<!-- P3097 = -->
<!-- P3127 = -->
<!-- P3157 = -->
<!-- Call Progress Tones -->
<!-- Dial Tone -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3000 = ch1-4:f1=350@-11,f2=440@-11,c=0/0; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3000 = ch1-8:f1=350@-11,f2=440@-11,c=0/0; -->
<!-- Ringback Tone -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3001 = ch1-4:f1=440@-11,f2=480@-11,c=200/400; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3001 = ch1-8:f1=440@-11,f2=480@-11,c=200/400; -->
<!-- Busy Tone -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3002 = ch1-4:f1=480@-11,f2=620@-11,c=50/50; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3002 = ch1-8:f1=480@-11,f2=620@-11,c=50/50; -->
<!-- Reorder Tone -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3003 = ch1-4:f1=480@-11,f2=620@-11,c=25/25; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3003 = ch1-8:f1=480@-11,f2=620@-11,c=25/25; -->
<!-- Channel Voice Settings -->
<!-- Tx to PSTN Audio Gain (dB). Default 1. Allowed values: -12-12. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3400 = ch1-4:1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3400 = ch1-8:1; -->
<!-- Rx from PSTN Audio Gain (dB). Default 0. Allowed values: -12-12. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3401 = ch1-4:0; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3401 = ch1-8:0; -->
<!-- Silence Suppression. Default Yes. N - No, Y - Yes -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3402 = ch1-4:Y; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3402 = ch1-8:Y; -->
<!-- Echo Cancellation. Default Yes. N - No, Y - Yes -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3403 = ch1-4:Y; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3403 = ch1-8:Y; -->
<!-- Channel Specific Settings -->
<!-- DTMF Methods. Default 1. 1:in-audio, 2:RFC2833, 3:1+2, 4:SIP Info, 5:1+4, 6:2+4, 7:1+2+4 -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3404 = ch1-4:1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3404 = ch1-8:1; -->
<!-- No Key Entry Timeot. Allowed Values: 1-9, default 4. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3405 = ch1-4:4; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3405 = ch1-8:4; -->
<!-- Local SIP Listen Port -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3406 = ch1-4:5060++; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3406 = ch1-8:5060++; -->
<!-- SRTP Mode(1-3). Default 1. -->
<!-- 1:disabled, 2:enabled but not forced, 3:enabled and forced -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3409 = ch1-4:1; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3409 = ch1-8:1; -->
<!-- Port Scheduling Schema (Voip->PSTN) -->
<!-- Round-robin and/or Flexible -->
<!-- Syntax: rr: port_group; [...]), Default: rr:1-4; round-robin of all ports -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3407 = rr:1-4; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3407 = rr:1-8; -->
<!-- Prefix to Specify Port(1 stage dialing method) -->
<!-- Syntax: prefix # + ch# + dialing# will request the ch# per call) -->
<!-- Note that this code has to prefix dialplan number and prefix doesn't impact round-robin -->
<P3408></P3408>
<!-- Dial Plan -->
<!-- PSTN Outgoing calls. -->
<P3331>{x+)</P3331>
<!-- Hookflash Duration (X10ms). Default 60. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3308 = ch1-4:60; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3308 = ch1-4:60; -->
<!-- Use DTMF Parameter from RFC2833 or SIP Info . 0 -Yes, 1 - No. Default Yes. -->
<P3190>0</P3190>
<!-- DTMF Digit Length(X10ms). Default 10. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3300 = ch1-4:10; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3300 = ch1-8:10; -->
<!-- DTMF Digit Volume(dB). Default 11. -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3301 = ch1-4:-11; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3301 = ch1-4:-11; -->
<!-- DTMF Dial Pause Between Each Digit(X10ms) -->
<!-- For GXW4104 (uncomment the following line by removing #) -->
<!-- P3310 = ch1-4; -->
<!-- For GXW4108 (uncomment the following line by removing #) -->
<!-- P3310 = ch1-8; -->
<!-- End User Settings. Please do not edit this section. -->
<!-- Web Access. 0 - HTTP, 1 - HTTPS -->
<!-- P900 = 0 -->
<!-- Web Port: HTTP default is 80 and HTTPS default is 443 -->
<!-- P901 = 80 -->
<!-- End User Password -->
<!-- P196 = 123 -->
<!-- DHCP support. 0 - yes, 1 - no -->
<!-- P8 = 0 -->
<!-- DHCP hostname, alphabet, max. length is 32 -->
<!-- P146 = -->
<!-- DHCP domain, alphabet, max. length is 32 -->
<!-- P147 = -->
<!-- DHCP vendor class ID, alphabet, max. length is 32 -->
<!-- P148 = Grandstream GXW-410x -->
<!-- PPPoE support. PPPoE user ID -->
<!-- P82 = -->
<!-- PPPoE password -->
<!-- P83 = -->
<!-- PPPoE service name, max. length is 64 alpabit -->
<!-- P269 = -->
<!-- Preferred DNS server, four field, octet digits -->
<!-- P92 = -->
<!-- P93 = -->
<!-- P94 = -->
<!-- P95 = -->
<!-- IP Address. Ignore if DHCP or PPPoE is used -->
<!-- P9 = 192 -->
<!-- P10 = 168 -->
<!-- P11 = 0 -->
<!-- P12 = 1 -->
<!-- Subnet mask. Ignore if DHCP or PPPoE is used -->
<!-- P13 = 255 -->
<!-- P14 = 255 -->
<!-- P15 = 255 -->
<!-- P16 = 0 -->
<!-- Default Router. Ignore if DHCP or PPPoE is used -->
<!-- P17 = 192 -->
<!-- P18 = 168 -->
<!-- P19 = 1 -->
<!-- P20 = 1 -->
<!-- DNS 1. Ignore if DHCP or PPPoE is used -->
<!-- P21 = 192 -->
<!-- P22 = 168 -->
<!-- P23 = 0 -->
<!-- P24 = 1 -->
<!-- DNS 2. Ignore if DHCP or PPPoE is used -->
<!-- P25 = 0 -->
<!-- P26 = 0 -->
<!-- P27 = 0 -->
<!-- P28 = 0 -->
<!-- End User Time settings -->
<!-- Time Zone. Offset in minutes to GMT -->
<P64>420</P64>
<!-- Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes. -->
<!-- When set to Yes(1), it will override the configured Time Zone setting if available. -->
<P143>0</P143>
<!-- Daylight Savings Time. 0 - no, 1 - yes -->
<P75>0</P75>
<!-- Optional Rule: -->
<!-- If Daylight Saving Time is selected (P75 = 1), optional rule will allow automatically time ajustment based on the configured rule -->
<!-- Maxlength = 33, default is North America or US Daylight Saving Time Schecule: value="3,2,7,2,0;11,1,7,2,0;60" -->
<P246>3,2,7,2,0;11,1,7,2,0;60</P246>
</config>
</gs_provision>
Reference in New Issue View Git Blame Copy Permalink