fusionpbx/resources/templates/provision/grandstream/gxp2170/{$mac}.xml

<?xml version="1.0" encoding="UTF-8" ?>
<!-- Grandstream XML Provisioning Configuration -->
<gs_provision version="1">
<mac>{$mac|replace:'-':''}</mac>
<config version="1">
<!-- ########################################################################################## -->
<!-- ## Configuration Template For GXP2130/2140/2160/2170/2135 Firmware Version 1.0.9.26     ## -->
<!-- ########################################################################################## -->


<!-- #################################################################### -->
<!-- # Account Settings                                                ## -->
<!-- #################################################################### -->
<!-- #################################################################### -->
<!-- # Account 1                                                       ## -->
<!-- #################################################################### -->
<!-- ############################################################### -->
<!-- # Account 1/General Settings -->
<!-- ############################################################### -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P271>1</P271>

<!--  Account Name -->
<!--  String -->
<P270>{$display_name_1}</P270>

<!--  SIP Server -->
<!--  String -->
<P47>{$server_address_1}</P47>

<!--  Secondary SIP Server -->
<!--  String -->
<P2312>{$secondary_server_address_1}</P2312>

<!--  Outbound Proxy -->
<!--  String -->
<P48>{$outbound_proxy_1}</P48>

<!--  Backup Outbound Proxy -->
<!--  String -->
<P2333></P2333>

<!--  BLF Server -->
<!--  String -->
<P2375></P2375>

<!--  SIP User ID -->
<!--  String -->
<P35>{$user_id_1}</P35>

<!--  Authenticate ID -->
<!--  String -->
<P36>{$auth_id_1}</P36>

<!--  Authenticate Password -->
<!--  String -->
<P34>{$user_password_1}</P34>

<!--  Name -->
<!--  String -->
<P3>{$display_name_1}</P3>

<!--  Voice Mail UserID -->
<!--  String -->
<P33>*97</P33>

<!-- ############################################################### -->
<!-- # Account 1/Network Settings -->
<!-- ############################################################### -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P103>{$grandstream_dns_mode}</P103>
{else}
<P103>0</P103>
{/if}

<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26040>0</P26040>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String -->
<P2308></P2308>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2309></P2309>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2310></P2310>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P52>{$grandstream_nat_traversal}</P52>
{else}
<P52>0</P52>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<P197></P197>

<!-- ############################################################### -->
<!-- # Account 1/SIP Settings/Basic Settings -->
<!-- ############################################################### -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P63>0</P63>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P31>1</P31>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P81>0</P81>

<!-- # Register Expiration (in minutes). Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P32>60</P32>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26051>60</P26051>

<!-- # Reregister Before Expiration (in seconds). Default is 0 second -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P2330>0</P2330>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2397>0</P2397>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2398>30</P2398>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2399>30</P2399>

<!-- # Local SIP Port. Default is 5060 -->
<!-- # Number -->
<!-- # Mandatory -->
<P40>5060</P40>

<!-- # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P138>20</P138>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory	 -->
<P209>50</P209>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P250>400</P250>

<!-- # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_1 == 'udp'}{$tp=0}{/if}
{if $sip_transport_1 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_1 == 'tls'}{$tp=2}{/if}
{if $sip_transport_1 == 'dns srv'}{$tp=1}{/if}
<P130>{$tp}</P130>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26024>0</P26024>

<!-- # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2329>1</P2329>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2331>0</P2331>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2305>0</P2305>

<!-- # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P288>1</P288>

<!-- # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P99>1</P99>
{else}
<P99>0</P99>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2319>0</P2319>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P272>0</P272>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26025>0</P26025>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2324>0</P2324>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2359>0</P2359>

<!-- # Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26015>0</P26015>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26018>0</P26018>

<!-- ############################################################### -->
<!-- # Account 1/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2338>0</P2338>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2339>0</P2339>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26054>1</P26054>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26058>1</P26058>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26059>1</P26059>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26061>1</P26061>

<!-- ############################################################### -->
<!-- # Account 1/SIP Settings/Advanced Features -->
<!-- ############################################################### -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2313>15</P2313>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P134></P134>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2389>0</P2389>

<!-- # Conference URI -->
<!-- # String -->
<P2318></P2318>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2350></P2350>

<!-- # Force BLF Call-pickup by prefix. 0 - Disable, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6752>0</P6752>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P1347>**</P1347>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<P26046></P26046>

<!-- # PUBLISH for Presence. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P188>0</P188>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2355>0</P2355>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26023>0</P26023>

<!-- # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM,  -->
<!-- # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower -->
<!-- # Default is 100 -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117, 119 -->
<!-- # Mandatory -->
<P198>100</P198>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2341>0</P2341>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2342>0</P2342>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2343>0</P2343>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2364>0 </P2364>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2325>0</P2325>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2388>0</P2388>

<!-- ############################################################### -->
<!-- # Account 1/SIP Settings/Session Timer -->
<!-- ############################################################### -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2395>1</P2395>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P260>180</P260>

<!-- # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P261>90</P261>

<!-- # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P262>0</P262>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P263>0</P263>

<!-- # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P264>0</P264>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P266>0</P266>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P267>1</P267>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P265>0</P265>

<!-- ############################################################### -->
<!-- # Account 1/SIP Settings/Security Settings -->
<!-- ############################################################### -->
<!-- # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2311>0</P2311>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2367>0</P2367>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2306>0</P2306>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P258>0</P258>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2347>0</P2347>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2346>0</P2346>

<!-- ############################################################### -->
<!-- # Account 1/Audio Settings -->
<!-- ############################################################### -->
<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125 -->
<!-- # Mandatory -->
<P57>0</P57>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P58>8</P58>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P59>4</P59>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125 -->
<!-- # Mandatory -->
<P60>18</P60>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P61>9</P61>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P62>98</P62>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P46>2</P46>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P98>125</P98>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2348>0</P2348>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29061>1</P29061>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26047>0</P26047>

<!-- # Disable Multiple m line in SDP -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P137>0</P137>

<!-- # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P183>{$grandstream_srtp}</P183>
{else}
<P183>0</P183>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2383>0</P2383>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2363>0</P2363>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P291>0</P291>

<!-- # Silence Suppression. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P50>0</P50>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P133>1</P133>

<!-- # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms -->
<!-- # Default is 2 -->
<!-- # Number: 0, 1, 2, 3, 4, 5, 6, 7 -->
<!-- # Mandatory -->
<P132>2</P132>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P37>2</P37>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P49>1</P49>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2323>0</P2323>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P97>1</P97>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P96>97</P96>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2385>123</P2385>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P79>101</P79>

<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2301>0</P2301>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2302>1</P2302>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2303>0</P2303>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250 -->
<!-- # Mandatory -->
<P26060>250</P26060>

<!-- ############################################################### -->
<!-- # Account 1/Call Settings -->
<!-- ############################################################### -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29>0</P29>

<!-- # Dial Plan Prefix -->
<!-- # String  -->
<P66></P66>

<!-- # Dial Plan. Default value is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P290>{$grandstream_dial_plan}</P290>

<!-- # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P182>0</P182>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P104>0	</P104>

<!-- # Matching Incoming Caller ID. Matching Rule 1 -->
<!-- # String -->
<P1488></P1488>

<!-- # Matching Rule 1 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1489>0</P1489>

<!-- # Matching Incoming Caller ID. Matching Rule 2 -->
<!-- # String -->
<P1490></P1490>

<!-- # Matching Rule 2 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1491>0</P1491>

<!-- # Matching Incoming Caller ID. Matching Rule 3 -->
<!-- # String -->
<P1492></P1492>

<!-- # Matching Rule 3 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1493>0</P1493>

<!-- # Ring Timeout (in seconds). Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P1328>60</P1328>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P65>0</P65>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P129>0</P129>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P90>0</P90>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P135>0</P135>

<!-- # Transfer on Conference HangUp. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2304>0</P2304>

<!-- # Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2384>1</P2384>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26070>30</P26070>

<!-- # No Key Entry Timeout (in seconds). Default is 4 -->
<!-- # Number: 1 - 15 -->
<!-- # Mandatory -->
<P85>4</P85>

<!-- # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P72>1</P72>

<!-- # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26006>0</P26006>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26062>1</P26062>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26049></P26049>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26050>0</P26050>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26063>0</P26063>

<!-- ############################################################### -->
<!-- # Account 1/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P298>0</P298>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26019>0</P26019>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26071>0</P26071>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26072>0</P26072>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2356></P2356>

<!-- ############################################################### -->
<!-- # Account 1/Feature Codes -->
<!-- ############################################################### -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P191>1</P191>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2344></P2344>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2345></P2345>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26013></P26013>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26014></P26014>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26009></P26009>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26010></P26010>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26011></P26011>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26012></P26012>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P139>20</P139>

<!-- #################################################################### -->
<!-- # Account 2 -->
<!-- #################################################################### -->
<!-- ############################################################### -->
<!-- # Account 2/General Settings -->
<!-- ############################################################### -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($user_password_2)}
<P401>1</P401>
{else}
<P401>0</P401>
{/if}

<!-- # Account Name -->
<!-- # String -->
<P417>{$display_name_2}</P417>

<!-- # SIP Server -->
<!-- # String -->
<P402>{$server_address_2}</P402>

<!-- # Secondary SIP Server -->
<!-- # String -->
<P2412></P2412>

<!-- # Outbound Proxy -->
<!-- # String -->
<P403>{$outbound_proxy_2}</P403>

<!-- # Backup Outbound Proxy -->
<!-- # String -->
<P2433></P2433>

<!-- # BLF Server -->
<!-- # String -->
<P2475></P2475>

<!-- # SIP User ID -->
<!-- # String -->
<P404>{$user_id_2}</P404>

<!-- # Authenticate ID -->
<!-- # String -->
<P405>{$auth_id_2}</P405>

<!-- # Authenticate password -->
<!-- # String -->
<P406>{$user_password_2}</P406>

<!-- # Name -->
<!-- # String -->
<P407>{$display_name_2}</P407>

<!-- # Voice Mail UserID -->
<!-- # String -->
<P426>*97</P426>

<!-- ############################################################### -->
<!-- # Account 2/Network Settings -->
<!-- ############################################################### -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P408>{$grandstream_dns_mode}</P408>
{else}
<P408>0</P408>
{/if}
<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26140>0</P26140>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String -->
<P2408></P2408>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2409></P2409>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2410></P2410>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P414>{$grandstream_nat_traversal}</P414>
{else}
<P414>0</P414>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<P418></P418>

<!-- ############################################################### -->
<!-- # Account 2/SIP Settings/Basic Settings -->
<!-- ############################################################### -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P409>0</P409>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P410>1</P410>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P411>0</P411>

<!-- # Register Expiration (in minutes). Default is 60. Max is 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P412>60</P412>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26151>60</P26151>

<!-- # Reregister before Expiration (in seconds). Default is 0 -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P2430>0</P2430>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2497>0</P2497>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2498>30</P2498>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2499>30</P2499>

<!-- # Local SIP port. Default is 5062 -->
<!-- # Number -->
<!-- # Mandatory -->
<P413>5062</P413>

<!-- # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P471>20</P471>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory -->
<P440>50</P440>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P441>400</P441>

<!-- # SIP Transport. 0 - UDP, 1 - TCP, 2 - TCP/TLS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_2 == 'udp'}{$tp=0}{/if}
{if $sip_transport_2 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_2 == 'tls'}{$tp=2}{/if}
{if $sip_transport_2 == 'dns srv'}{$tp=1}{/if}
<P448>{$tp}</P448>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26124>0</P26124>

<!-- # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2429>1</P2429>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2431>0</P2431>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2405>0</P2405>

<!-- # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P489>1</P489>

<!-- # SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P415>1</P415>
{else}
<P415>0</P415>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2419>0</P2419>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P435>0</P435>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26125>0</P26125>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2424>0</P2424>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2459>0</P2459>

<!-- #Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- #Mandatory -->
<P26115>0 </P26115>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26118>0</P26118>

<!-- ############################################################### -->
<!-- # Account 2/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2438>0</P2438>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2439>0</P2439>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26154>1</P26154>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26158>1</P26158>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26159>1</P26159>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26161>1</P26161>

<!-- ############################################################### -->
<!-- # Account 2/SIP Settings/Advanced Features -->
<!-- ############################################################### -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2413>15</P2413>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P444></P444>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2489>0</P2489>

<!-- # Conference URI -->
<!-- # String -->
<P2418></P2418>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2450></P2450>

<!-- # Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6753>0</P6753>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P481>**</P481>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<P26146></P26146>

<!-- # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P488>0</P488>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2455>0</P2455>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26123>0</P26123>

<!-- # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117. Default is 100 -->
<!-- # Mandatory -->
<P424>100</P424>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2441>0</P2441>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2442>0</P2442>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2443>0</P2443>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2464>0</P2464>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2425>0</P2425>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2488>0</P2488>
<!-- ############################################################### -->
<!-- # Account 2/SIP Settings/Session Timer -->
<!-- ############################################################### -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2495>1</P2495>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P434>180</P434>

<!-- # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P434 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P427>90</P427>

<!-- # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P428>0</P428>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory  -->
<P429>0</P429>

<!-- # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P430>0	</P430>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P432>0</P432>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P433>1</P433>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P431>0</P431>

<!-- ############################################################### -->
<!-- # Account 2/SIP Settings/Security Settings -->
<!-- ############################################################### -->
<!-- # Check Domain Certificates. 0 - No, 1 - Yes. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2411>0</P2411>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2467>0</P2467>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2406>0</P2406>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P449>0</P449>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2447>0</P2447>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2446>0</P2446>

<!-- ############################################################### -->
<!-- # Account 2/Audio Settings -->
<!-- ############################################################### -->
<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P451>0</P451>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P452>8</P452>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P453>4</P453>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P454>18</P454>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P455>9</P455>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P456>98</P456>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P457>2</P457>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P458>125</P458>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2448>0</P2448>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29161>1</P29161>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26147>0</P26147>

<!-- #Disable Multiple m line in SDP -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P487>0</P487>

<!-- # SRTP Mode -->
<!-- # 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P443>{$grandstream_srtp}</P443>
{else}
<P443>0</P443>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2483>0</P2483>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2463>0</P2463>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P460>0</P460>

<!-- # Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P485>0</P485>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P498>1</P498>

<!-- # Jitter Buffer Length.  -->
<!-- # 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2 -->
<!-- # Number: 0, 1, 2, 3, 4, 5, 6, 7 -->
<!-- # Mandatory -->
<P497>2</P497>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P486>2</P486>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P493>1</P493>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2423>0</P2423>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P495>1</P495>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P494>97</P494>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2485>123</P2485>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P496>101</P496>

<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2401>0</P2401>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2402>1</P2402>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2403>0</P2403>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250  -->
<!-- # Mandatory -->
<P26160>250</P26160>

<!-- ############################################################### -->
<!-- # Account 2/Call Settings -->
<!-- ############################################################### -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P422>0</P422>

<!-- # Dial Plan Prefix -->
<!-- # String -->
<P419></P419>

<!-- # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P459>{$grandstream_dial_plan}</P459>

<!-- # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P442>0</P442>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory  -->
<P423>0</P423>

<!-- # Matching Incoming Caller ID. Matching Rule 1 -->
<!-- # String -->
<P1494></P1494>

<!-- # Matching Rule 1 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1495>0</P1495>

<!-- # Matching Incoming Caller ID. Matching Rule 2. -->
<!-- # String -->
<P1496></P1496>

<!-- # Matching Rule 2 Distinctive Ringtone. -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1497>0</P1497>

<!-- # Matching Incoming Caller ID. Matching Rule 3. -->
<!-- # String -->
<P1498></P1498>

<!-- # Matching Rule 3 Distinctive Ringtone. -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1499>0</P1499>

<!-- # Ring Timeout (in seconds) Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P476>60</P476>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P421>0</P421>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P446>0</P446>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P425>0</P425>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P469>0</P469>

<!-- # Transfer on conference HangUp. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2404>0</P2404>

<!-- # Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2484>0</P2484>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26170>30</P26170>

<!-- # No Key Entry Timeout. Default is 4 -->
<!-- # Number: 1 - 15 -->
<!-- # Mandatory -->
<P491>4</P491>

<!-- # Use # As Dial Key. 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P492>1</P492>

<!-- #On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26106>0</P26106>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26162>1</P26162>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26149></P26149>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26150>0</P26150>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26163>0</P26163>

<!-- ############################################################### -->
<!-- # Account 2/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P438>0</P438>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26119>0</P26119>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26171>0</P26171>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26172>0</P26172>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2456></P2456>

<!-- ############################################################### -->
<!-- # Account 2/Feature Codes -->
<!-- ############################################################### -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P420>1</P420>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2444></P2444>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2445></P2445>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26113></P26113>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26114></P26114>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26109></P26109>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26110></P26110>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26111></P26111>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26112></P26112>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P470></P470>

<!-- #################################################################### -->
<!-- # Account 3 -->
<!-- #################################################################### -->
<!-- ############################################################### -->
<!-- # Account 3/General Settings -->
<!-- ############################################################### -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($user_password_3)}
<P501>1</P501>
{else}
<P501>0</P501>
{/if}

<!-- # Account Name -->
<!-- # String -->
<P517>{$display_name_3}</P517>

<!-- # SIP Server -->
<!-- # String -->
<P502>{$server_address_3}</P502>

<!-- # Secondary SIP Server -->
<!-- # String -->
<P2512></P2512>

<!-- # Outbound Proxy -->
<!-- # String -->
<P503>{$outbound_proxy_3}</P503>

<!-- # Backup Outbound Proxy -->
<!-- # String -->
<P2533></P2533>

<!-- # BLF Server -->
<!-- # String -->
<P2575></P2575>

<!-- # SIP User ID -->
<!-- # String -->
<P504>{$user_id_3}</P504>

<!-- # Authenticate ID -->
<!-- # String -->
<P505>{$auth_id_3}</P505>

<!-- # Authenticate Password -->
<!-- # String -->
<P506>{$user_password_3}</P506>

<!-- # Name -->
<!-- # String -->
<P507>{$display_name_3}</P507>

<!-- 	 -->
<!-- # Voice Mail UserID -->
<!-- # String -->
<P526>*97</P526>

<!-- ############################################################### -->
<!-- # Account 3/Network Settings -->
<!-- ############################################################### -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0  -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P508>{$grandstream_dns_mode}</P508>
{else}
<P508>0</P508>
{/if}

<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26240>0</P26240>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String -->
<P2508></P2508>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2509></P2509>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2510></P2510>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P514>{$grandstream_nat_traversal}</P514>
{else}
<P514>0</P514>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<P518></P518>

<!-- ############################################################### -->
<!-- # Account 3/SIP Settings/Basic Settings -->
<!-- ############################################################### -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P509>0</P509>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P510>1</P510>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P511>0</P511>

<!-- # Register Expiration (in minutes). Default is 60. Max is 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P512>60</P512>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26251>60</P26251>

<!-- # Reregister before Expiration (in seconds). Default is 0 second -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P2530>0</P2530>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2597>0</P2597>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2598>30</P2598>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2599>30</P2599>

<!-- # Local SIP Port. Default is 5064 -->
<!-- # Number -->
<!-- # Mandatory -->
<P513>5064</P513>

<!-- # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P571>20</P571>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory -->
<P540>50</P540>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses. -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P541>400</P541>

<!-- # SIP Transport. 0 - UDP, 1 - TCP. 2- TCP/TLS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_3 == 'udp'}{$tp=0}{/if}
{if $sip_transport_3 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_3 == 'tls'}{$tp=2}{/if}
{if $sip_transport_3 == 'dns srv'}{$tp=1}{/if}
<P548>{$tp}</P548>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26224>0</P26224>

<!-- # SIP URI Scheme When Using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2529>1</P2529>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2531>0</P2531>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2505>0</P2505>

<!-- # Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P589>1</P589>

<!-- # SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P515>1</P515>
{else}
<P515>0</P515>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2519>0</P2519>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P535>0</P535>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26225>0</P26225>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2524>0</P2524>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2559>0</P2559>

<!-- #Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- #Mandatory -->
<P26215>0</P26215>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26218>0</P26218>

<!-- ############################################################### -->
<!-- # Account 3/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2538>0</P2538>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2539>0</P2539>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26254>1</P26254>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26258>1</P26258>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26259>1</P26259>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26261>1</P26261>

<!-- ########################################## -->
<!-- # Account 3/SIP Settings/Advanced Features -->
<!-- ########################################## -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2513>15</P2513>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P544></P544>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2589>0</P2589>

<!-- # Conference URI -->
<!-- # String -->
<P2518></P2518>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2550></P2550>

<!-- # Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6754>0</P6754>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P581>**</P581>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<!-- #P26246 =  -->

<!-- # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P588>0</P588>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2555>0</P2555>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26223>0</P26223>

<!-- # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100 -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117 -->
<!-- # Mandatory -->
<P524>100</P524>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2541>0</P2541>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2542>0</P2542>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2543>0</P2543>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2564>0</P2564>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2525>0</P2525>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2588>0</P2588>

<!-- ########################################## -->
<!-- # Account 3/SIP Settings/Session Timer -->
<!-- ########################################## -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2595>1</P2595>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P534>180</P534>

<!-- # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P534 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P527>90</P527>

<!-- # Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P528>0</P528>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P529>0</P529>

<!-- # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P530>0</P530>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P532>0</P532>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P533>1</P533>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P531>0</P531>

<!-- ########################################## -->
<!-- # Account 3/SIP Settings/Security Settings -->
<!-- ########################################## -->
<!-- # Check Domain Certificates. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2511>0</P2511>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2567>0</P2567>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2506>0</P2506>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P549>0</P549>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2547>0</P2547>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2546>0</P2546>

<!-- ########################################## -->
<!-- # Account 3/Audio Settings -->
<!-- ########################################## -->
<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2501>0</P2501>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2502>1</P2502>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2503>0</P2503>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2585>123</P2585>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P596>101</P596>

<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P551>0</P551>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P552>8</P552>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P553>4</P553>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P554>18</P554>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P555>9</P555>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P556>98</P556>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P557>2</P557>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P558>125</P558>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2548>0</P2548>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29261>1</P29261>

<!-- # Disable Multiple m line in SDP -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P587>0</P587>

<!-- # SRTP Mode -->
<!-- # 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P543>{$grandstream_srtp}</P543>
{else}
<P543>0</P543>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2583>0</P2583>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2563>0</P2563>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P560>0</P560>

<!-- # Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P585>0</P585>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P586>2</P586>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P593>1</P593>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2523>0</P2523>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P595>1</P595>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P594>97</P594>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P598>1</P598>

<!-- # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2 -->
<!-- # Number: 0, 1, 2, 3, 4, 5, 6, 7 -->
<!-- # Mandatory -->
<P597>2</P597>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26247>0</P26247>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250  -->
<!-- # Mandatory -->
<P26260>250</P26260>

<!-- ########################################## -->
<!-- # Account 3/Call Settings -->
<!-- ########################################## -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P522>0</P522>

<!-- # Dial Plan Prefix -->
<!-- # String -->
<P519></P519>

<!-- # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P559>{$grandstream_dial_plan}</P559>

<!-- # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P542>0</P542>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P523>0</P523>

<!-- # Matching Incoming Caller ID. Matching Rule 1 -->
<!-- # String -->
<P1500></P1500>

<!-- # Matching Rule 1 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1501>0</P1501>

<!-- # Matching Incoming Caller ID. Matching Rule 2 -->
<!-- # String -->
<P1502></P1502>

<!-- # Matching Rule 2 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1503>0</P1503>

<!-- # Matching Incoming Caller ID. Matching Rule 3 -->
<!-- # String -->
<P1504></P1504>

<!-- # Matching Rule 3 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1505>0</P1505>

<!-- # Ring Timeout (in seconds). Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P576>60</P576>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P521>0</P521>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P546>0</P546>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P525>0</P525>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P569>0</P569>

<!-- # Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2504>0</P2504>

<!-- #Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2584>0</P2584>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26270>30</P26270>

<!-- # No Key Entry Timeout. Default is 4 -->
<!-- # Number: 1 - 15 -->
<!-- # Mandatory -->
<P591>4</P591>

<!-- # Use # As Dial Key. 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P592>1</P592>

<!-- #On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26206>0</P26206>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26262>1</P26262>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26249></P26249>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26250>0</P26250>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26263>0</P26263>

<!-- ############################################################### -->
<!-- # Account 3/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P538>0</P538>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26219>0</P26219>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26271>0</P26271>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26272>0</P26272>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2556></P2556>


<!-- ########################################## -->
<!-- # Account 3/Feature Codes -->
<!-- ########################################## -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P520>1</P520>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2544></P2544>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2545></P2545>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26213></P26213>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26214></P26214>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26209></P26209>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26210></P26210>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26211></P26211>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26212></P26212>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P570></P570>

<!-- #################################################################### -->
<!-- # Account 4  - GXP2140/2160/2170/2135 only -->
<!-- #################################################################### -->
<!-- ########################################## -->
<!-- # Account 4/General Settings -->
<!-- ########################################## -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($user_password_4)}
<P601>1</P601>
{else}
<P601>0</P601>
{/if}

<!-- # Account Name -->
<!-- # String -->
<P617>{$display_name_4}</P617>

<!-- # SIP Server -->
<!-- # String -->
<P602>{$server_address_4}</P602>

<!-- # Secondary SIP Server -->
<!-- # String -->
<P2612></P2612>

<!-- # Outbound Proxy -->
<!-- # String -->
<P603>{$outbound_proxy_4}</P603>

<!-- # Backup Outbound Proxy -->
<!-- # String -->
<P2633></P2633>

<!-- # BLF Server -->
<!-- # String -->
<P2675></P2675>

<!-- # SIP User ID -->
<!-- # String -->
<P604>{$user_id_4}</P604>

<!-- # Authenticate ID -->
<!-- # String -->
<P605>{$auth_id_4}</P605>

<!-- # Authenticate password -->
<!-- # String -->
<P606>{$user_password_4}</P606>

<!-- # Name -->
<!-- # String -->
<P607>{$display_name_4}</P607>

<!-- # Voice Mail UserID -->
<!-- # String -->
<P626>*97</P626>

<!-- ########################################## -->
<!-- # Account 4/Network Settings -->
<!-- ########################################## -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P608>{$grandstream_dns_mode}</P608>
{else}
<P608>0</P608>
{/if}

<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26340>0</P26340>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String  -->
<P2608></P2608>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2609></P2609>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2610></P2610>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P614>{$grandstream_nat_traversal}</P614>
{else}
<P614>0</P614>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<P618></P618>

<!-- ########################################## -->
<!-- # Account 4/SIP Settings/Basic Settings -->
<!-- ########################################## -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P609>0</P609>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P610>1</P610>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P611>0</P611>

<!-- # Register Expiration (in minutes). Default is 60. Max is 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P612>60</P612>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26351>60</P26351>

<!-- # Reregister before Expiration (in seconds). Default is 0 -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P2630>0</P2630>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2697>0</P2697>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2698>30</P2698>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2699>30</P2699>

<!-- # Local SIP port. Default is 5066 -->
<!-- # Number -->
<!-- # Mandatory -->
<P613>5066</P613>

<!-- # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P671>20</P671>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory -->
<P640>50</P640>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P641>400</P641>

<!-- # SIP Transport. 0 - UDP, 1 - TCP. 2 - TCP/TLS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_4 == 'udp'}{$tp=0}{/if}
{if $sip_transport_4 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_4 == 'tls'}{$tp=2}{/if}
{if $sip_transport_4 == 'dns srv'}{$tp=1}{/if}
<P648>{$tp}</P648>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26324>0</P26324>

<!-- # SIP URI Scheme When Using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2629>1</P2629>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2631>0</P2631>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2605>0</P2605>

<!-- # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P689>1</P689>

<!-- # SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P615>1</P615>
{else}
<P615>0</P615>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2619>0</P2619>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P635>0</P635>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26325>0</P26325>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2624>0</P2624>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2659>0</P2659>

<!-- #Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- #Mandatory -->
<P26315>0</P26315>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26318>0</P26318>

<!-- ############################################################### -->
<!-- # Account 4/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2638>0</P2638>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2639>0</P2639>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26354>1</P26354>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26358>1</P26358>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26359>1</P26359>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26361>1</P26361>

<!-- ########################################## -->
<!-- # Account 4/SIP Settings/Advanced Features -->
<!-- ########################################## -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2613>15</P2613>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P644></P644>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2689>0</P2689>

<!-- # Conference URI -->
<!-- # String -->
<P2618></P2618>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2650></P2650>

<!-- # Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6755>0</P6755>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P681>**</P681>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<!-- #P26346 =  -->

<!-- # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P688>0</P688>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2655>0</P2655>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26323>0</P26323>

<!-- # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100 -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117 -->
<!-- # Mandatory -->
<P624>100</P624>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2641>0</P2641>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2642>0</P2642>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2643>0</P2643>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2664>0</P2664>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2625>0</P2625>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2688>0</P2688>

<!-- ########################################## -->
<!-- # Account 4/SIP Settings/Session Timer -->
<!-- ########################################## -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2695>1</P2695>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P634>180</P634>

<!-- # Minimum SE (in seconds). Default is 90 seconds. This value must be lower than or equal to P634 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P627>90</P627>

<!-- # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P628>0</P628>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P629>0</P629>

<!-- # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P630>0</P630>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0 - 2 -->
<!-- # Mandatory -->
<P632>0</P632>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P633>1</P633>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P631>0</P631>

<!-- ########################################## -->
<!-- # Account 4/SIP Settings/Security Settings -->
<!-- ########################################## -->
<!-- # Check Domain Certificates. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2611>0</P2611>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2667>0</P2667>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2606>0</P2606>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P649>0</P649>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2647>0</P2647>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2646>0</P2646>

<!-- ########################################## -->
<!-- # Account 4/Audio Settings -->
<!-- ########################################## -->
<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2601>0</P2601>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2602>1</P2602>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2603>0</P2603>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2685>123</P2685>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P696>101</P696>

<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P651>0</P651>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P652>8</P652>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P653>4</P653>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P654>18</P654>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P655>9</P655>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P656>98</P656>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P657>2</P657>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P658>125</P658>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2648>0</P2648>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29361>1</P29361>

<!-- #Disable Multiple m line in SDP -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P687>0</P687>

<!-- # SRTP Mode -->
<!-- # 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P643>{$grandstream_srtp}</P643>
{else}
<P643>0</P643>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2683>0</P2683>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2663>0</P2663>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P660>0</P660>

<!-- # Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P685>0</P685>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P686>2</P686>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P693>1</P693>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2623>0</P2623>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P695>1</P695>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P694>97</P694>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P698>1</P698>

<!-- # Jitter Buffer Length.  -->
<!-- # 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2 -->
<!-- # Number: 0, 1, 2, 3, 4, 5, 6, 7 -->
<!-- # Mandatory -->
<P697>2</P697>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26347>0</P26347>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250  -->
<!-- # Mandatory -->
<P26360>250</P26360>

<!-- ########################################## -->
<!-- # Account 4/Call Settings -->
<!-- ########################################## -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P622>0</P622>

<!-- # Dial Plan Prefix -->
<!-- # String -->
<P619></P619>

<!-- # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P659>{$grandstream_dial_plan}</P659>

<!-- # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P642>0</P642>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P623>0</P623>

<!-- # Matching Incoming Caller ID. Matching Rule 1 -->
<!-- # String -->
<P1506></P1506>

<!-- # Matching Rule 1 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1507>0</P1507>

<!-- # Matching Incoming Caller ID. Matching Rule 2 -->
<!-- # String -->
<P1508></P1508>

<!-- # Matching Rule 2 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1509>0</P1509>

<!-- # Matching Incoming Caller ID. Matching Rule 3 -->
<!-- # String -->
<P1510></P1510>

<!-- # Matching Rule 3 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1511>0</P1511>

<!-- # Ring Timeout (in seconds). Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P676>60</P676>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P621>0</P621>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P646>0</P646>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P625>0</P625>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P669>0</P669>

<!-- # Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2604>0</P2604>

<!-- #Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2684>0</P2684>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26370>30</P26370>

<!-- # No Key Entry Timeout. Default is 4 -->
<!-- # Number: 1 - 15 -->
<!-- # Mandatory -->
<P691>4</P691>

<!-- # Use # As Dial Key. 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P692>1</P692>

<!-- #On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26306>0</P26306>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26362>1</P26362>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26349></P26349>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26350>0</P26350>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26363>0</P26363>

<!-- ############################################################### -->
<!-- # Account 4/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P638>0</P638>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26319>0</P26319>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26371>0</P26371>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26372>0</P26372>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2656></P2656>


<!-- ########################################## -->
<!-- # Account 4/Feature Codes -->
<!-- ########################################## -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P620>1</P620>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2644></P2644>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2645></P2645>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26313></P26313>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26314></P26314>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26309></P26309>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26310></P26310>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26311></P26311>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26312></P26312>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P670></P670>

<!-- #################################################################### -->
<!-- # Account 5 - GXP2160/2170 only -->
<!-- #################################################################### -->
<!-- ########################################## -->
<!-- # Account 5/General Settings -->
<!-- ########################################## -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($user_password_5)}
<P1701>1</P1701>
{else}
<P1701>0</P1701>
{/if}

<!-- # Account Name -->
<!-- # String -->
<P1717>{$display_name_5}</P1717>

<!-- # SIP Server -->
<!-- # String -->
<P1702>{$server_address_5}</P1702>

<!-- # Secondary SIP Server -->
<!-- # String -->
<P2712></P2712>

<!-- # Outbound Proxy -->
<!-- # String -->
<P1703>{$outbound_proxy_5}</P1703>

<!-- # Backup Outbound Proxy -->
<!-- # String -->
<P2733></P2733>

<!-- # BLF Server -->
<!-- # String -->
<P2775></P2775>

<!-- # SIP User ID -->
<!-- # String -->
<P1704>{$user_id_5}</P1704>

<!-- # Authenticate ID -->
<!-- # String -->
<P1705>{$auth_id_5}</P1705>

<!-- # Authenticate Password -->
<!-- # String -->
<P1706>{$user_password_5}</P1706>

<!-- # Name -->
<!-- # String -->
<P1707>{$display_name_5}</P1707>

<!-- # Voice Mail UserID -->
<!-- # String -->
<P1726>*97</P1726>

<!-- ########################################## -->
<!-- # Account 5/Network Settings -->
<!-- ########################################## -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P1708>{$grandstream_dns_mode}</P1708>
{else}
<P1708>0</P1708>
{/if}

<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26440>0</P26440>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String -->
<P2708></P2708>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2709></P2709>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2710></P2710>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P1714>{$grandstream_nat_traversal}</P1714>
{else}
<P1714>0</P1714>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<P1718></P1718>

<!-- ########################################## -->
<!-- # Account 5/SIP Settings/Basic Settings -->
<!-- ########################################## -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1709>0</P1709>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1710>1</P1710>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1711>0</P1711>

<!-- # Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!-- # Number: 1-64800 -->
<!-- # Mandatory -->
<P1712>60</P1712>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26451>60</P26451>

<!-- # Reregister before Expiration (in seconds) Default is 0 -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P2730>0</P2730>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2797>0</P2797>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2798>30</P2798>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2799>30</P2799>

<!-- # Local SIP Port. Default is 5068 -->
<!-- # Number -->
<!-- # Mandatory -->
<P1713>5068</P1713>

<!-- # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P1771>20</P1771>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory -->
<P1740>50</P1740>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P1741>400</P1741>

<!-- # SIP Transport. 0 - UDP, 1 - TCP. 2 - TCP/TLS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_5 == 'udp'}{$tp=0}{/if}
{if $sip_transport_5 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_5 == 'tls'}{$tp=2}{/if}
{if $sip_transport_5 == 'dns srv'}{$tp=1}{/if}
<P1748>{$tp}</P1748>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26424>0</P26424>

<!-- # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2729>1</P2729>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2731>0</P2731>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2705>0</P2705>

<!-- # Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1789>1</P1789>

<!-- # SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P1715>1</P1715>
{else}
<P1715>0</P1715>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2719>0</P2719>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1735>0</P1735>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26425>0</P26425>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2724>0</P2724>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2759>0</P2759>

<!-- #Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- #Mandatory -->
<P26415>0 </P26415>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26418>0</P26418>

<!-- ############################################################### -->
<!-- # Account 5/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2738>0</P2738>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2739>0</P2739>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26454>1</P26454>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26458>1</P26458>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26459>1</P26459>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26461>1</P26461>

<!-- ########################################## -->
<!-- # Account 5/SIP Settings/Advanced Features -->
<!-- ########################################## -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2713>15</P2713>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P1744></P1744>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2789>0</P2789>

<!-- # Conference URI -->
<!-- # String -->
<P2718></P2718>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2750></P2750>

<!-- # Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6756>0</P6756>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P1781>**</P1781>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<!-- #P26446 =  -->

<!-- # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1788>0</P1788>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2755>0</P2755>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26423>0</P26423>

<!-- # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100 -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117 -->
<!-- # Mandatory -->
<P1724>100</P1724>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2741>0</P2741>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2742>0</P2742>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2743>0</P2743>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2764>0</P2764>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2725>0</P2725>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2788>0</P2788>

<!-- ########################################## -->
<!-- # Account 5/SIP Settings/Session Timer -->
<!-- ########################################## -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2795>1</P2795>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P1734>180</P1734>

<!-- # Minimum SE (in seconds). Default is 90. The value must be lower than or equal to P1734 -->
<!-- # Number: 90 - 64800 -->
<!-- # Mandatory -->
<P1727>90</P1727>

<!-- # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1728>0</P1728>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1729>0</P1729>

<!-- # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1730>0</P1730>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1732>0</P1732>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P1733>1</P1733>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1731>0</P1731>

<!-- ########################################## -->
<!-- # Account 5/SIP Settings/Security Settings -->
<!-- ########################################## -->
<!-- # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2711>0</P2711>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2767>0</P2767>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2706>0</P2706>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1749>0</P1749>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2747>0</P2747>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2746>0</P2746>

<!-- ########################################## -->
<!-- # Account 5/Audio Settings -->
<!-- ########################################## -->
<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2701>0</P2701>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2702>1</P2702>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2703>0</P2703>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2785>123</P2785>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P1796>101</P1796>

<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1751>0</P1751>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1752>8</P1752>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1753>4</P1753>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125   -->
<!-- # Mandatory -->
<P1754>18</P1754>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1755>9</P1755>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1756>98</P1756>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1757>2</P1757>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1758>125</P1758>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2748>0</P2748>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29461>1</P29461>

<!-- #Disable Multiple m line in SDP -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1787>0</P1787>

<!-- # SRTP Mode -->
<!-- # 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P1743>{$grandstream_srtp}</P1743>
{else}
<P1743>0</P1743>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2783>0</P2783>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2763>0</P2763>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1760>0</P1760>

<!-- # Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1785>0</P1785>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P1786>2</P1786>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1793>1</P1793>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2723>0</P2723>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1795>1</P1795>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P1794>97</P1794>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1798>1</P1798>

<!-- # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2 -->
<!-- # Number: 0 - 7 -->
<!-- # Mandatory -->
<P1797>2</P1797>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26447>0</P26447>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250  -->
<!-- # Mandatory -->
<P26460>250</P26460>

<!-- ########################################## -->
<!-- # Account 5/Call Settings -->
<!-- ########################################## -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1722>0</P1722>

<!-- # Dial Plan Prefix -->
<!-- # String -->
<P1719></P1719>

<!-- # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P1759>{$grandstream_dial_plan}</P1759>

<!-- # Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1742>0</P1742>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1723>0</P1723>

<!-- # Matching Incoming Caller ID. Matching Rule 1. -->
<!-- # String -->
<P1512></P1512>

<!-- # Matching Rule 1 Distinctive Ringtone. -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1513>0</P1513>

<!-- # Matching Incoming Caller ID. Matching Rule 2 -->
<!-- # String -->
<P1514></P1514>

<!-- # Matching Rule 2 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1515>0</P1515>

<!-- # Matching Incoming Caller ID. Matching Rule 3 -->
<!-- # String -->
<P1516></P1516>

<!-- # Matching Rule 3 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1517>0</P1517>

<!-- # Ring Timeout (in seconds). Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P1776>60</P1776>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1721>0</P1721>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1746>0</P1746>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1725>0</P1725>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1769>0</P1769>

<!-- # Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2704>0</P2704>

<!-- #Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2784>0</P2784>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26470>30</P26470>

<!-- # No Key Entry Timeout. Default is 4 -->
<!-- # Number: 1 - 15 -->
<!-- # Mandatory -->
<P791>4</P791>

<!-- # Use # As Dial Key. 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P792>1</P792>

<!-- #On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26406>0</P26406>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26462>1</P26462>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26449></P26449>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26450>0</P26450>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26463>0</P26463>

<!-- ############################################################### -->
<!-- # Account 5/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P738>0</P738>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26419>0</P26419>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26471>0</P26471>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26472>0</P26472>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2756></P2756>


<!-- ########################################## -->
<!-- # Account 5/Feature Codes -->
<!-- ########################################## -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P1720>1</P1720>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2744></P2744>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2745></P2745>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26413></P26413>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26414></P26414>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26409></P26409>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26410></P26410>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26411></P26411>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26412></P26412>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P1770></P1770>

<!-- #################################################################### -->
<!-- # Account 6 - GXP2160/2170 only -->
<!-- #################################################################### -->
<!-- ########################################## -->
<!-- # Account 6/General Settings -->
<!-- ########################################## -->
<!-- # Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($user_password_6)}
<P1801>1</P1801>
{else}
<P1801>0</P1801>
{/if}

<!-- # Account Name -->
<!-- # String -->
<P1817>{$display_name_6}</P1817>

<!-- # SIP Server -->
<!-- # String -->
<P1802>{$server_address_6}</P1802>

<!-- # Secondary SIP Server -->
<!-- # String -->
<P2812></P2812>

<!-- # Outbound Proxy -->
<!-- # String -->
<P1803>{$outbound_proxy_6}</P1803>

<!-- # Backup Outbound Proxy -->
<!-- # String -->
<P2833></P2833>

<!-- # BLF Server -->
<!-- # String -->
<P2875></P2875>

<!-- # SIP User ID -->
<!-- # String -->
<P1804>{$user_id_6}</P1804>

<!-- # Authenticate ID -->
<!-- # String -->
<P1805>{$auth_id_6}</P1805>

<!-- # Authenticate password -->
<!-- # String -->
<P1806>{$user_password_6}</P1806>

<!-- # Display Name -->
<!-- # String -->
<P1807>{$display_name_6}</P1807>

<!-- # Voice Mail UserID -->
<!-- # String -->
<P1826>*97</P1826>


<!-- ########################################## -->
<!-- # Account 6/Network Settings -->
<!-- ########################################## -->
<!-- # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_dns_mode)}
<P1808>{$grandstream_dns_mode}</P1808>
{else}
<P1808>0</P1808>
{/if}

<!-- # DNS SRV Fail-over Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P26540>0</P26540>

<!-- # Primary IP. Maximum 15 characters -->
<!-- # String -->
<P2808></P2808>

<!-- # Backup IP 1 -->
<!-- # String -->
<P2809></P2809>

<!-- # Backup IP 2 -->
<!-- # String -->
<P2810></P2810>

<!-- # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
{if isset($grandstream_nat_traversal)}
<P1814>{$grandstream_nat_traversal}</P1814>
{else}
<P1814>0</P1814>
{/if}

<!-- # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- # String -->
<!-- # Mandatory -->
<P1818></P1818>

<!-- ########################################## -->
<!-- # Account 6/SIP Settings/Basic Settings -->
<!-- ########################################## -->
<!-- # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1809>0</P1809>

<!-- # SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1810>1</P1810>

<!-- # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1811>0</P1811>

<!-- # Register Expiration (in minutes). Default is 60. Max is 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P1812>60</P1812>

<!-- # Subscribe Expiration. Default is 60. Max about 45 days -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P26551>60</P26551>

<!-- # Reregister before Expiration (in seconds). Default is 0 -->
<!-- # Number: 1 - 64800 -->
<!-- # Mandatory -->
<P2830>0</P2830>

<!-- # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2897>0</P2897>

<!-- # OPTIONS Keep Alive Interval. Default is 30 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2898>30</P2898>

<!-- # OPTIONS Keep Alive Max Lost. Default is 3 -->
<!-- # Number -->
<!-- # Mandatory -->
<P2899>30</P2899>

<!-- # Local SIP Port. Default is 5070 -->
<!-- # Number -->
<!-- # Mandatory -->
<P1813>5070</P1813>

<!-- # SIP Registration Failure Retry Wait Time (in seconds) Default is 20 -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P1871>20</P1871>

<!-- # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100 -->
<!-- # Number: 50, 100, 200 -->
<!-- # Mandatory -->
<P1840>50</P1840>

<!-- # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses. -->
<!-- # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400. -->
<!-- # Number: 200, 400, 800 -->
<!-- # Mandatory -->
<P1841>400</P1841>

<!-- # SIP Transport. 0 - UDP, 1 - TCP, 2 - TCP/TLS. Default is 2 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{$tp=0}
{if $sip_transport_6 == 'udp'}{$tp=0}{/if}
{if $sip_transport_6 == 'tcp'}{$tp=1}{/if}
{if $sip_transport_6 == 'tls'}{$tp=2}{/if}
{if $sip_transport_6 == 'dns srv'}{$tp=1}{/if}
<P1848>{$tp}</P1848>

<!-- # SIP Listening Mode.  -->
<!-- # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P26524>0</P26524>

<!-- # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2829>1</P2829>

<!-- # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2831>0</P2831>

<!-- # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2805>0</P2805>

<!-- # Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1889>1</P1889>

<!-- # SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($subscribe_mwi)}
<P1815>1</P1815>
{else}
<P1815>0</P1815>
{/if}

<!-- # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2819>0</P2819>

<!-- # Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1835>0</P1835>

<!-- # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26525>0</P26525>

<!-- # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2824>0</P2824>

<!-- # Add Auth Header On Initial REGISTER -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2859>0</P2859>

<!-- #Allow SIP Reset -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- #Mandatory -->
<P26515>0</P26515>

<!-- # Ignore Alert-Info header -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26518>0</P26518>

<!-- ############################################################### -->
<!-- # Account 6/SIP Settings/Custom SIP Headers -->
<!-- ############################################################### -->

<!-- # Use Privacy Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2838>0</P2838>

<!-- # Use P-Preferred-Identity Header -->
<!-- # 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P2839>0</P2839>

<!-- # Use X-Grandstream-PBX Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26554>1</P26554>

<!-- # Use P-Access-Network-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26558>1</P26558>

<!-- # Use P-Emergency-Info Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26559>1</P26559>

<!-- # Use MAC Header -->
<!-- # 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26561>1</P26561>

<!-- ########################################## -->
<!-- # Account 6/SIP Settings/Advanced Features -->
<!-- ########################################## -->
<!-- # Line-Seize Timeout (in seconds). Default is 15 -->
<!-- # Number: 15 - 60 -->
<!-- # Mandatory -->
<P2813>15</P2813>

<!-- # Eventlist BLF URI -->
<!-- # String -->
<P1844></P1844>

<!-- #Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0 -->
<!-- #Number:0,1 -->
<!-- #Mandatory -->
<P2889>0</P2889>

<!-- # Conference URI -->
<!-- # String -->
<P2818></P2818>

<!-- # Music On Hold URI -->
<!-- # String -->
<P2850></P2850>

<!-- # Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6757>0</P6757>

<!-- # BLF Call-pickup Prefix. Default is ** -->
<!-- # String -->
<!-- # Mandatory -->
<P1881>**</P1881>

<!-- # Call Pickup Barge-In Code -->
<!-- # String -->
<P26546></P26546>

<!-- # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1888>0</P1888>

<!-- # Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2855>0  </P2855>

<!-- # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26523>0</P26523>

<!-- # Special Feature.100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100 -->
<!-- # Number: 100, 101, 102, 108, 109, 110, 117 -->
<!-- # Mandatory -->
<P1824>100</P1824>

<!-- # Broadsoft -->
<!-- # Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2841>0</P2841>

<!-- # Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2842>0</P2842>

<!-- # Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2843>0</P2843>

<!-- # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2864>0</P2864>

<!-- # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2825>0</P2825>

<!-- # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2888>0</P2888>

<!-- ########################################## -->
<!-- # Account 6/SIP Settings/Session Timer -->
<!-- ########################################## -->
<!-- # Enable Session Timer. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2895>1</P2895>

<!-- # Session Expiration (in seconds). Default is 180 -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P1834>180</P1834>

<!-- # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P1834 -->
<!-- # Number: 0 - 64800 -->
<!-- # Mandatory -->
<P1827>90</P1827>

<!-- # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1828>0</P1828>

<!-- # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1829>0</P1829>

<!-- # Force Timer (Still use timer when remote party does not support timer) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1830>0</P1830>

<!-- # UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1832>0</P1832>

<!-- # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P1833>1</P1833>

<!-- # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1831>0</P1831>

<!-- ########################################## -->
<!-- # Account 6/SIP Settings/Security Settings -->
<!-- ########################################## -->
<!-- # Check Domain Certificates. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922 -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2811>0</P2811>

<!-- # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2867>0</P2867>

<!-- # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2806>0</P2806>

<!-- # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1849>0</P1849>

<!-- # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2847>0</P2847>

<!-- # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2846>0</P2846>

<!-- ########################################## -->
<!-- # Account 6/Audio Settings -->
<!-- ########################################## -->
<!-- # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2801>0</P2801>

<!-- # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2802>1</P2802>

<!-- # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2803>0</P2803>

<!-- # OPUS Payload Type. Default is 123 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P2885>123</P2885>

<!-- # DTMF Payload Type. Default is 101 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P1896>101</P1896>

<!-- # Preferred Vocoder -->
<!-- # 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS -->
<!-- # choice 1. Default is 0 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1851>0</P1851>

<!-- # choice 2. Default is 8 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125   -->
<!-- # Mandatory -->
<P1852>8</P1852>

<!-- # choice 3. Default is 4 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1853>4</P1853>

<!-- # choice 4. Default is 18 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1854>18</P1854>

<!-- # choice 5. Default is 9 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1855>9</P1855>

<!-- # choice 6. Default is 98 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125   -->
<!-- # Mandatory -->
<P1856>98</P1856>

<!-- # choice 7. Default is 2 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1857>2</P1857>

<!-- # choice 8. Default is 125 -->
<!-- # Number: 0, 2, 4, 8, 9, 18, 98, 125  -->
<!-- # Mandatory -->
<P1858>125</P1858>

<!-- # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2848>0</P2848>

<!-- # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P29561>1</P29561>

<!-- #Disable Multiple m line in SDP -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1887>0</P1887>

<!-- # SRTP Mode -->
<!-- # 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($grandstream_srtp)}
<P1843>{$grandstream_srtp}</P1843>
{else}
<P1843>0</P1843>
{/if}

<!-- # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P2883>0</P2883>

<!-- #Crypto Life Time -->
<!-- #0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2863>0</P2863>

<!-- # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1860>0</P1860>

<!-- # Silence Suppression 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1885>0</P1885>

<!-- # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- # Number: 1 - 64 -->
<!-- # Mandatory -->
<P1886>2</P1886>

<!-- # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1893>1</P1893>

<!-- # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2823>0</P2823>

<!-- # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1895>1</P1895>

<!-- # iLBC Payload Type. Default is 97 -->
<!-- # Number: 96 - 127 -->
<!-- # Mandatory -->
<P1894>97</P1894>

<!-- # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1898>1</P1898>

<!-- # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2 -->
<!-- # Number: 0-7 -->
<!-- # Mandatory -->
<P1897>2</P1897>

<!-- # Hide Vocoder. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P26547>0</P26547>

<!-- # DTMF Delay. Default is 250 -->
<!-- # Number: 100 - 250  -->
<!-- # Mandatory -->
<P26560>250</P26560>

<!-- ########################################## -->
<!-- # Account 6/Call Settings -->
<!-- ########################################## -->
<!-- # Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1822>0</P1822>

<!-- # Dial Plan Prefix -->
<!-- # String -->
<P1819></P1819>

<!-- # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } -->
<!-- # String -->
<!-- # Mandatory -->
<P1859>{$grandstream_dial_plan}</P1859>

<!-- # Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1842>0</P1842>

<!-- # Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1823>0</P1823>

<!-- # Matching Incoming Caller ID. Matching Rule 1 -->
<!-- # String -->
<P1518></P1518>

<!-- # Matching Rule 1 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1519>0</P1519>

<!-- # Matching Incoming Caller ID. Matching Rule 2 -->
<!-- # String -->
<P1520></P1520>

<!-- # Matching Rule 2 Distinctive Ringtone. -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1521>0</P1521>

<!-- # Matching Incoming Caller ID. Matching Rule 3 -->
<!-- # String -->
<P1522></P1522>

<!-- # Matching Rule 3 Distinctive Ringtone -->
<!-- # 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0. -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P1523>0</P1523>

<!-- # Ring Timeout (in seconds). Default is 60 -->
<!-- # Number: 30 - 3600 -->
<!-- # Mandatory -->
<P1876>60</P1876>

<!-- # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1821>0</P1821>

<!-- # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1846>0</P1846>

<!-- # Auto Answer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1825>0</P1825>

<!-- # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1869>0</P1869>

<!-- # Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2804>0</P2804>

<!-- #Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2884>0</P2884>

<!-- # Blind Transfer Wait Timeout. Default is 30 -->
<!-- # Number: 30 - 300 -->
<!-- # Mandatory -->
<P26570>30</P26570>

<!-- # No Key Entry Timeout. -->
<!-- # Number: 0, 1 -->
<P891>4</P891>

<!-- # Use # As Dial Key. 0 - No, 1 - Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P892>1</P892>

<!-- #On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26506>0</P26506>

<!-- # RFC2543 Hold. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26562>1</P26562>

<!-- # Hiding Dialing Password -->
<!-- # Prefix for dialing password -->
<!-- # String -->
<P26549></P26549>

<!-- # Password length. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P26550>0</P26550>

<!-- # Disable Call Waiting. 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P26563>0</P26563>

<!-- ############################################################### -->
<!-- # Account 6/Intercom Settings -->
<!-- ############################################################### -->
<!-- # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P838>0</P838>

<!-- # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26519>0</P26519>

<!-- # Mute on answer Intercom call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26571>0</P26571>

<!-- # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26572>0</P26572>

<!-- # Custom Call-Info for Auto Answer. -->
<!-- # String -->
<P2856></P2856>

<!-- ########################################## -->
<!-- # Account 6/Feature Codes -->
<!-- ########################################## -->
<!-- #Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P1820>1</P1820>

<!-- #Do Not Disturb (DND) - On -->
<!-- # String -->
<P2844></P2844>

<!-- #Do Not Disturb (DND) - Off -->
<!-- # String -->
<P2845></P2845>

<!-- #Call Forward Unconditionally (All) - On -->
<!-- # String -->
<P26513></P26513>

<!-- #Call Forward Unconditionally (All) - Off -->
<!-- # String -->
<P26514></P26514>

<!-- #Call Forward Busy - On -->
<!-- # String -->
<P26509></P26509>

<!-- #Call Forward Busy - Off -->
<!-- # String -->
<P26510></P26510>

<!-- #Call Forward Delayed (No Answer) - On -->
<!-- #String -->
<P26511></P26511>

<!-- #Call Forward Delayed (No Answer) - Off -->
<!-- #String -->
<P26512></P26512>

<!-- #Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- #Number: 1 - 120 -->
<!-- #Mandatory -->
<P1870></P1870>

<!-- ################################################################### -->
<!-- ## Network/Basic Settings                                                   ## -->
<!-- ################################################################### -->
<!-- # Internet Protocol. 0 - Both, prefer IPv4, 1 - Both, prefer IPv6, 2 - IPv4 Only, 3 - IPv6 Only Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
<P1415>0</P1415>

<!-- # IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<!-- # P8 = 0 -->

<!-- ########################################## -->
<!-- # DHCP -->
<!-- ########################################## -->
<!-- # Host name, DHCP option 12. Max length allowed is 64 characters -->
<!-- # String -->
<P146></P146>

<!-- # Vendor Class ID, DHCP option 60. Max length allowed is 64 characters -->
<!-- # String -->
<!-- # For GXP2130, Default value is Grandstream GXP2130. -->
<!-- # P148 = Grandstream GXP2130 -->
<!--   -->
<!-- # For GXP2140, Default value is Grandstream GXP2140. -->
<!-- # P148 = Grandstream GXP2140 -->

<!-- # For GXP2160, Default value is Grandstream GXP2160. -->
<!-- # P148 = Grandstream GXP2160 -->

<!-- # For GXP2170, Default value is Grandstream GXP2170. -->
<!-- # P148 = Grandstream GXP2170 -->

<!-- # For GXP2135, Default value is Grandstream GXP2135. -->
<!-- # P148 = Grandstream GXP2135 -->

<!-- ########################################## -->
<!-- # PPPoE -->
<!-- ########################################## -->
<!-- # PPPoE Account ID -->
<!-- # String -->
<P82></P82>

<!-- # PPPoE Password -->
<!-- # String -->
<!-- # Cannot contain ` or " -->
<P83></P83>

<!-- # PPPoE Service Name -->
<!-- # String  -->
<P269></P269>

<!-- ########################################## -->
<!-- # Statically Configured -->
<!-- ########################################## -->
<!-- # IP Address. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<P9>192</P9>

<!-- # Number: 0 - 255 -->
<P10>168</P10>

<!-- # Number: 0 - 255 -->
<P11>0</P11>

<!-- # Number: 0 - 255 -->
<P12>160</P12>

<!-- # Subnet mask. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<P13>255</P13>

<!-- # Number: 0 - 255 -->
<P14>255</P14>

<!-- # Number: 0 - 255 -->
<P15>0</P15>

<!-- # Number: 0 - 255 -->
<P16>0</P16>

<!-- # Gateway. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<P17>0</P17>

<!-- # Number: 0 - 255 -->
<P18>0</P18>

<!-- # Number: 0 - 255 -->
<P19>0</P19>

<!-- # Number: 0 - 255 -->
<P20>0</P20>

<!-- # DNS 1 Server. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<P21>0</P21>

<!-- # Number: 0 - 255 -->
<P22>0</P22>

<!-- # Number: 0 - 255 -->
<P23>0</P23>

<!-- # Number: 0 - 255 -->
<P24>0</P24>

<!-- # DNS 2 Server. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<P25>0</P25>

<!-- # Number: 0 - 255 -->
<P26>0</P26>

<!-- # Number: 0 - 255 -->
<P27>0</P27>

<!-- # Number: 0 - 255 -->
<P28>0</P28>

<!-- # Preferred DNS server.  (if specified). -->
<!-- # Number: 0 - 255 -->
<P92>0</P92>

<!-- # Number: 0 - 255 -->
<P93>0</P93>

<!-- # Number: 0 - 255 -->
<P94>0</P94>

<!-- # Number: 0 - 255 -->
<P95>0</P95>

<!-- # IPv6 Address type. 0 - Auto Configured, 1 - Statically Configured. Default is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1419>0</P1419>

<!-- # IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static -->
<!-- # Number: 0, 1 -->
<P1426>0</P1426>

<!-- # Full Static: Static IPv6 Address -->
<P1420></P1420>

<!-- # Full Static: IPv6 Prefix Length -->
<P1421></P1421>

<!-- # Prefix Static: IPv6 Prefix (64bits) -->
<P1422></P1422>

<!-- # DNS Server 1 for IPv6 Address -->
<!-- # String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1424></P1424>

<!-- # DNS Server 2 for IPv6 Address -->
<!-- # String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1425></P1425>

<!-- # Preferred DNS Server for IPv6 Address -->
<!-- # String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1423></P1423>

<!-- ############################################################################## -->
<!-- ## Network/Advanced Settings                     ## -->
<!-- ############################################################################## -->

<!-- # 802.1X Mode. 0 - Disable, 1 - EAP-MD5. 2 - EAP-TLS, 3 - EAP-PEAPv0/MSCHAPv2. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
<P7901>0</P7901>

<!-- # 802.1X Identity. Max length allowed is 64 characters -->
<!-- # String -->
<P7902></P7902>

<!-- # MD5 Password. Max length allowed is 64 characters -->
<!-- # String -->
<P7903></P7903>

<!-- # 802.1X CA Certificate -->
<!-- # String -->
<!-- # P8439 = -->

<!-- # 802.1X Client Certificate -->
<!-- # String -->
<!-- # P8440 = -->

<!-- # HTTP Proxy -->
<!-- # String -->
<P1552></P1552>

<!-- # HTTPS Proxy -->
<!-- # String -->
<P1553></P1553>

<!-- # Bypass Proxy For -->
<!-- # String -->
<P22011></P22011>

<!-- # Layer 3 QoS for SIP -->
<!-- # Number:0 - 63 -->
<!-- # Mandatory -->
<P1558>26 </P1558>

<!-- # Layer 3 QoS for RTP -->
<!-- # Number:0 - 63 -->
<!-- # Mandatory -->
<P1559>46 </P1559>

<!-- # Enable DHCP VLAN. 0 - Disable, 1 - Enable. Default is 0. -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P8300>0</P8300>

<!-- # Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0 -->
<!-- # Number: 0 - 4094 -->
<!-- # Mandatory -->
{if isset($grandstream_lan_port_vlan) }
<P51>{$grandstream_lan_port_vlan}</P51>
{else}
<P51>0</P51>
{/if}

<!-- # Layer 2 QoS. 802.1p priority value (0 - 7). Default is 0 -->
<!-- # Number: 0 - 7 -->
<!-- # Mandatory -->
<P87>0</P87>

<!-- # PC Port Mode. 0 - Enable, 1 - Disabled, 2 - Mirrored. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1348>0</P1348>

<!-- # PC Port VLAN Tag. Default is 0  -->
<!-- # Number: 0 - 4094 -->
<!-- #Mandatory -->
{if isset($grandstream_pc_port_vlan) }
<P229>{$grandstream_pc_port_vlan}</P229>
{else}
<P229>1</P229>
{/if}

<!-- # PC Port Priority Value. Default is 0  -->
<!-- # Number: 0 - 7 -->
<!-- # Mandatory -->
<P230>0</P230>

<!-- # Enable CDP.   0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P22119>1</P22119>

<!-- # Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1684>1</P1684>

<!-- # LLDP TX Interval. Default is 30  -->
<!-- # Number: 1 - 3600 -->
<!-- # Mandatory -->
<P22122>30</P22122>

<!-- # Maximum Transmission Unit(MTU). Default is 1500 -->
<!-- # Number: 576 - 1500 -->
<!-- # Mandatory -->
<P244>1500</P244>

<!-- ############################################################################## -->
<!-- ##  Network/Affinity Settings -->
<!-- ############################################################################## -->
<!-- # Affinity Support. 0 - Disabled, 1 - Enabled -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # 0 - No, 1 - Yes -->
<!-- # Mandatory -->
<P8334>0</P8334>

<!-- # Preferred Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 -->
<!-- # Number: 0 - 5. Default is 0 -->
<!-- # Mandatory -->
<P8335>0</P8335>

<!-- ############################################################################## -->
<!-- ##  Network /Bluetooth Settings -->
<!-- ############################################################################## -->
<!-- # Bluetooth Power. Default is 1. -->
<!-- # 0 - Off, 1 - On, 2 - Off & Hide Menu From LCD -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{if isset($grandstream_bluetooth_power)}
<P2910>{$grandstream_bluetooth_power}</P2910>
{else}
<P2910>0</P2910>
{/if}

<!-- # Handsfree Mode. Default is 0. -->
<!-- # Number: 0, 1. 0 - Off, 1 - On -->
<!-- # Mandatory -->
{if isset($grandstream_bluetooth_handsfree)}
<P2911>{$grandstream_bluetooth_handsfree}</P2911>
{else}
<P2911>0</P2911>
{/if}

<!-- # Bluetooth Name. -->
<!-- # String -->
<!-- #P8364 = -->

<!-- ############################################################################## -->
<!-- ## Network/OpenVPN Settings                     ## -->
<!-- ############################################################################## -->
<!-- # OpenVPN Enable.  0 - No, 1 - Yes. Default is 1 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P7050>0</P7050>

<!-- # OpenVPN Server Address -->
<!-- # String -->
<P7051></P7051>

<!-- # OpenVPN Port. Default is 1194 -->
<!-- # Number -->
<!-- # Mandatory -->
<P7052>1194</P7052>

<!-- # OpenVPN Transport.  0 - UDP, 1 - TCP. Default is 0 -->
<!-- #Number: 0, 1  -->
<!-- #Mandatory -->
<P2912>0</P2912>

<!-- # OpenVPN CA -->
<!-- # String -->
<P9902></P9902>

<!-- # OpenVPN Certificate -->
<!-- # String -->
<P9903></P9903>

<!-- # OpenVPN Client Key -->
<!-- # String -->
<P9904></P9904>

<!-- # OpenVPN Cipher Method. 0 - Blowfish, 1 - AES-128, 2 - AES-256, 3 - Triple-DES. Default is 0 -->
<!-- # Number: 0, 1, 2, 3  -->
<!-- # Mandatory -->
<P8396>0</P8396>

<!-- # OpenVPN Username -->
<!-- # String -->
<P8394></P8394>

<!-- # OpenVPN Password -->
<!-- # String -->
<P8395></P8395>

<!-- ############################################################################## -->
<!-- ##  Maintenance/ Web Access     ## -->
<!-- ############################################################################## -->

<!-- # End User Password -->
<!-- # String: a-z, A-Z, 0-9 -->
<P196>{$user_password}</P196>

<!-- # Admin password for web interface -->
<!-- # String: a-z, A-Z, 0-9 -->
<P2>{$admin_password}</P2>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Upgrade and Provisioning -->
<!-- ############################################################################## -->

<!-- # Firmware Upgrade and Provisioning -->
<!-- # 0 - Always Check For New Firmware -->
<!-- # 1 - Check New Firmware only when F/W pre/suffix changes -->
<!-- # 2 - Always Skip the Firmware Check -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P238>0</P238>

<!-- # Always Authenticate Before Challenge. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P20713>0</P20713>

<!-- # Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1 -->
<!-- # When set to Yes(1), it will override the configured provision path and method -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P145>1</P145>

<!-- # Additional Override DHCP Option. 0 - None,  1 - Option 150,  2 - Option 160. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P8337>0</P8337>

<!-- # Allow DHCP Option 120 to Override SIP Server -->
<!-- # 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1411>0</P1411>

<!-- # 3CX Auto Provision. 0 - No, 1 - Yes. Default is Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1414>1</P1414>

<!-- # Automatic Upgrade.  -->
<!-- # 0 - No,  -->
<!-- # 1 - Yes, check for upgrade based on minute(s) setting, -->
<!-- # 2 - Yes, check for upgrade based on Hour of Day setting, -->
<!-- # 3 - Yes, check for upgrade based on Day of Week setting, -->
<!-- # Default is No -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
<P194>1</P194>

<!-- # Check for new firmware every () minutes. Default is 7 days. -->
<!-- # Number: 60-86400 -->
<!-- # Mandatory -->
<P193>60</P193>

<!-- # Hour of the Day (0-23). Default is 1 -->
<!-- # Number: 0 - 23 -->
<P285>1</P285>

<!-- # Day of the Week (0-6). Default is 1 -->
<!-- # Number: 0-6 -->
<P286>1</P286>

<!-- # Disable SIP NOTIFY Authentication. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0,1 -->
<!-- # Mandatory -->
<P4428>0</P4428>

<!-- #Config -->
<!-- # Config Via. 0 - TFTP,  1 - HTTP, 2 - HTTPS. Default is 2 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P212>2</P212>

<!-- # Config Server Path -->
<!-- # String -->
{if $grandstream_config_server_path=="none"}
<P237></P237>
{elseif isset($grandstream_config_server_path)}
<P237>{$grandstream_config_server_path}</P237>
{else}
<P237>{$domain_name}{$project_path}/app/provision</P237>
{/if}

<!-- # Config HTTP/HTTPS User Name -->
<!-- # String -->
<P1360>{$http_auth_username}</P1360>

<!-- # Config HTTP/HTTPS Password -->
<!-- # String -->
<P1361>{$http_auth_password}</P1361>

<!-- # Config File Prefix -->
<!-- # String -->
<P234></P234>

<!-- # Config File Postfix -->
<!-- # String -->
<P235></P235>

<!-- # XML Config File Password -->
<!-- # String -->
<P1359></P1359>

<!-- # Authenticate Conf File. 0 - No, 1 - Yes. Default is No -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P240>0</P240>

<!-- # Firmware -->
<!-- # Firmware Upgrade Via. 0 - TFTP,  1 - HTTP, 2 - HTTPS. Default is 2 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P6767>2</P6767>

<!-- # Firmware Server Path -->
<!-- # String -->
{if isset($grandstream_firmware_path)}
<P192>{$grandstream_firmware_path}</P192>
{else}
<P192>{$domain_name}{$project_path}/app/provision</P192>
{/if}

<!-- # Firmware HTTP/HTTPS User Name -->
<!-- # String -->
<P6768></P6768>

<!-- # Firmware HTTP/HTTPS Password -->
<!-- # String -->
<P6769></P6769>

<!-- # Firmware File Prefix -->
<!-- # String -->
<P232></P232>

<!-- # Firmware File Postfix -->
<!-- # String -->
<P233></P233>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Syslog -->
<!-- ############################################################################## -->
<!-- # Syslog Protocol. 0 - UDP, 1 - SSL/TLS. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8402>0</P8402>

<!-- # Syslog Server (name of the server, max length is 64 characters) -->
<!-- # String -->
<P207>{$grandstream_syslog_server}</P207>

<!-- # Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0 -->
<!-- # Number: 0, 1 , 2, 3, 4 -->
<!-- # Mandatory -->
{if isset($grandstream_syslog_level)}
<P208>{$grandstream_syslog_level}</P208>
{else}
<P208>0</P208>
{/if}

<!-- # Syslog Keyword Filtering -->
<!-- # String -->
<P22129></P22129>

<!-- # Send SIP Log. 0 - Do not send SIP log in Syslog, 1 - Send SIP log in Syslog if configured and set to DEBUG level. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($grandstream_send_sip_log)}
<P1387>{$grandstream_send_sip_log}</P1387>
{else}
<P1387>0</P1387>
{/if}

<!-- # Show Internet Down Message. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8370>0</P8370>

<!-- # Auto recover from abnormal. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1438>1</P1438>

<!-- # USB Console Log. 0 - No, 1 - Yes. Default is 0 (for GXP2140/2160/2170 only) -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2922>0</P2922>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Language -->
<!-- ############################################################################## -->
<!-- # Display Language. Default is Auto -->
<!-- # ar - Arabic, cz - Czech, de - Deutsh -->
<!-- # en - English, es - Spanish, fr - Francais -->
<!-- # he - Hebrew, hr - Hrvatski, hu - Magyar  -->
<!-- # it - Italiano, ja - japanese, ko - korean, lv - latvian -->
<!-- # nl - Dutch, pl - Polski, pt - Portugue -->
<!-- # ru - Russian, sl - Slovenian, se - Svenska, tr - Turkish -->
<!-- # zh-tw - traditional chinese, zh - simplified chinese, auto - Automatic -->
<!-- # gxp - Downloaded Language -->
<!-- # String -->
<!-- # Mandatory -->
<P1362>Auto</P1362>

<!-- # Default Input Selection. Default is Multi-Tap. -->
<!-- # 0 - Multi-Tap, 1 - Shiftable -->
<P2920>0</P2920>

<!-- # Auto language download. 0 - Yes, 1 - No. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2961>0</P2961>

<!-- ############################################################################## -->
<!-- ##  Maintenance/TR-069 -->
<!-- ############################################################################## -->
<!-- # ACS URL -->
<!-- # String -->
<!-- # P4503 = -->

<!-- # TR-069 Username -->
<!-- # String -->
<P4504></P4504>

<!-- # TR-069 Password -->
<!-- # String -->
<P4505></P4505>

<!-- # Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P4506>0</P4506>

<!-- # Periodic Inform Interval. Default is 86400. -->
<!-- # Number -->
<P4507>86400</P4507>

<!-- # Connection Request Username	 -->
<!-- # String: a-z, A-Z, 0-9 -->
<P4511></P4511>

<!-- # Connection Request Password	 -->
<!-- # String: a-z, A-Z, 0-9 -->
<P4512></P4512>

<!-- # Connection Request Port. Default is 7547. -->
<!-- # Number -->
<P4518>7547</P4518>

<!-- # CPE SSL Certificate -->
<!-- # String: a-z, A-Z, 0-9 -->
<P8220></P8220>

<!-- # CPE SSL Private Key -->
<!-- # String: a-z, A-Z, 0-9 -->
<P8221></P8221>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Security Settings/Security   ## -->
<!-- ############################################################################## -->
<!-- # Configuration Via Keypad Menu. 0 - Unrestricted, 1 - Basic settings only, 2 - Constraint mode, 3 - Locked Mode. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
<P1357>0</P1357>

<!-- # SIP TLS Certificate -->
<!-- # String: a-z, A-Z, 0-9 -->
<!-- #P280 = -->

<!-- # SIP TLS Private Key -->
<!-- # String: a-z, A-Z, 0-9 -->
<!-- #P279 = -->

<!-- # SIP TLS Private Key Password -->
<!-- # String: a-z, A-Z, 0-9 -->
<P281></P281>

<!-- # Web Access Mode. 0 - HTTPS, 1 - HTTP, 2 - Disabled. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1650>1</P1650>

<!-- # HTTP Web Port. Default is 80 -->
<!-- # Number -->
<!-- # Mandatory -->
<P22120>80</P22120>

<!-- # HTTPS Web Port. Default is 443 -->
<!-- # Number -->
<!-- # Mandatory -->
<P22121>443</P22121>

<!-- # Disable SSH. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<P276>0</P276>

<!-- # Web/Keypad/Restrict mode Lockout Duration (0-60 minutes). Default is 5 -->
<!-- # Number: 0-60 -->
<P1683>5</P1683>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Security Settings/Trusted CA Certificates   ## -->
<!-- ############################################################################## -->
<!-- # Trusted CA Certificate 1 -->
<!-- # String -->
<!-- # P8433 = -->

<!-- # Trusted CA Certificate 2 -->
<!-- # String -->
<!-- # P8434 = -->

<!-- # Trusted CA Certificate 3 -->
<!-- # String -->
<!-- # P8435 = -->

<!-- # Trusted CA Certificate 4 -->
<!-- # String -->
<!-- # P8436 = -->

<!-- # Trusted CA Certificate 5 -->
<!-- # String -->
<!-- # P8437 = -->

<!-- # Trusted CA Certificate 6 -->
<!-- # String -->
<!-- # P8438 = -->

<!-- ############################################################################## -->
<!-- ##  Maintenance/Security Settings/Keypad Lock  ## -->
<!-- ############################################################################## -->
<!-- # Enable Keypad Locking. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1382>0</P1382>

<!-- # Keypad Lock Type. 0 - All Keys, 1 - Functional Keys. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8383>0</P8383>

<!-- # Password to Lock/Unlock -->
<!-- # String -->
<P1383></P1383>

<!-- # Keypad Lock Timer. Default is 0 -->
<!-- # Number -->
<!-- # Mandatory -->
<P8384>0</P8384>

<!-- # Emergency -->
<!-- # String -->
<P8385></P8385>

<!-- ############################################################################## -->
<!-- ##  Maintenance/Packet Capture       ## -->
<!-- ############################################################################## -->
<!-- # With RTP Packets. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6007>0</P6007>

<!-- # Capture Location. 0 - Internal Storage, 1 - USB. Default is 0 (GXP2140/2160/GXP2170 only) -->
<!-- # Number: 0, 1. -->
<!-- # Mandatory -->
<P2999>0</P2999>

<!-- # USB Filename (GXP2140/2160/GXP2170 only) -->
<!-- # String -->
<P6008></P6008>

<!-- ############################################################################## -->
<!-- ##  Phonebook/Phonebook Management -->
<!-- ############################################################################## -->
<!-- # Enable Phonebook XML Download. # 0 - Disabled, 1 - Enabled, use HTTP, 2 - Enabled, use TFTP, 3 - Enabled, use HTTPS. Default is 0 -->
<!-- # Number: 0, 1, 2, 3 -->
<!-- # Mandatory -->
{if isset($contact_grandstream)}
<P330>1</P330>
{else}
<P330>0</P330>
{/if}

<!-- # HTTP/HTTPS User Name -->
<!-- # String -->
<P6713></P6713>

<!-- # HTTP/HTTPS Password -->
<!-- # String -->
<P6714></P6714>

<!-- # Phonebook XML Server Path -->
<!-- # This is a string of up to 256 characters that should contain a path to the XML file. It MUST be in the host/path format. -->
<!-- # For example: directory.grandstream.com/engineering -->
<!-- # String -->
{if isset($contact_grandstream)}
<P331>{$grandstream_phonebook_xml_server_path}{$mac}/</P331>
{elseif isset($grandstream_phonebook_xml_server_path)}
<P331>{$grandstream_phonebook_xml_server_path}</P331>
{else}
<P331></P331>
{/if}

<!-- # Phonebook Download Interval (in minutes) -->
<!-- # Valid value range is 5-720. Default is 0 for disabled -->
<!-- # Number: 0, 5-720;  -->
{if isset($grandstream_phonebook_download_interval)}
<P332>{$grandstream_phonebook_download_interval}</P332>
{else}
<P332>0</P332>
{/if}

<!-- # Remove Manually-edited entries on Download. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P333>1</P333>

<!-- # Sort Phonebook by. 0 - Last Name, 1 - First Name. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2914>0</P2914>

<!-- # Phonebook Key Function. 0 - Default, 1 - LDAP Search, 2 - Local Phonebook, 3 - Local Group, 4 - Broadsoft Phonebook -->
<!-- # Number: 0, 1, 2, 3, 4. -->
<!-- # Mandatory -->
{if isset($contact_grandstream)}
<P1526>2</P1526>
{else}
<P1526>0</P1526>
{/if}

<!-- # Default search mode. 0 - Quick match, 1 - Exact match. Default is 0 -->
<!-- # Number: 0, 1. -->
<!-- # Mandatory -->
<P2970>0</P2970>

<!-- ############################################################################## -->
<!-- ##  Phonebook/LDAP -->
<!-- ############################################################################## -->
<!-- #LDAP protocol. 0 - LDAP, 1 - LDAPS -->
<!-- #Number: 0,1 -->
<!-- #Mandatory -->
<P8037>0</P8037>

<!-- # LDAP Server Address, up to 256 characters can be used. It can be IP address or Domain name -->
<!-- # String -->
<P8020>{$grandstream_ldap_server}</P8020>

<!-- # LDAP Server Port. Default is 389. -->
<!-- # Number: 1 - 65535 -->
<P8021>389</P8021>

<!-- # Base. The LDAP search base refers to the location in the directory where the search is requested to begin -->
<!-- # Example 1: dc=grandstream,dc=com -->
<!-- # Example 2: ou=Boston, dc=grandstream,dc=com -->
<!-- # String -->
<P8022>{$grandstream_ldap_base_dn}</P8022>

<!-- # User name. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank -->
<!-- # String -->
<P8023>{$grandstream_ldap_username}</P8023>

<!-- # Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds -->
<!-- # String -->
<P8024>{$grandstream_ldap_password}</P8024>

<!-- # LDAP Number Filter -->
<!-- # LDAP name filter is the filter used for name look ups. Please refer to user manual for examples -->
<!-- # String -->
<P8025>{$grandstream_ldap_number_filter}</P8025>

<!-- # LDAP Name Filter -->
<!-- # LDAP name filter is the filter used for name look ups. Please refer to user manual for examples -->
<!-- # String -->
<P8026>{$grandstream_ldap_name_filter}</P8026>

<!-- # LDAP Version. Protocol version for the phone when send the bind requests -->
<!-- # 2 - version 2, 3 - version 3. Default is 3 -->
<!-- # Mandatory -->
<P8027>3</P8027>

<!-- # LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result -->
<!-- # The setting allows the users to configure multiple space separated name attributes -->
<!-- # String -->
<P8028>{$grandstream_ldap_name_attr}</P8028>

<!-- # LDAP Number Attributes. This setting specifies the “number” attributes of each record which are returned in the LDAP search result -->
<!-- # The setting allows the users to configure multiple space separated number attributes -->
<!-- # String -->
<P8029>{$grandstream_ldap_number_attr}</P8029>

<!-- # LDAP Display Name. The entry information to be shown on phone LCD. Grandstream phones will display up to 3 fields -->
<!-- # String -->
<P8030>{$grandstream_ldap_display_name}</P8030>

<!-- # Max Hits. The setting specifies the maximum number of results to be returned by the LDAP server -->
<!-- # If the value is set to 0, server will return all search results. Default is 50 -->
<!-- # Number: 0 - 32000 -->
<!-- # Mandatory -->
<P8031>50</P8031>

<!-- # Search Timeout (in seconds). Default is 30 -->
<!-- # The setting specifies how long the server should process the request and client waits for server to return -->
<!-- # Number: 0 - 180 -->
<!-- # Mandatory -->
<P8032>30</P8032>

<!-- # Sort Results. This setting is used for sorting searching result. Default is 0 -->
<!-- # Number: 0, 1. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Mandatory -->
<P8033>0</P8033>

<!-- # LDAP Lookup -->
<!-- # Incoming calls. 0 - No, 1 - Yes. Default is 0 -->
<P8035>0</P8035>

<!-- # Outgoing calls. 0 - No, 1 - Yes. Default is 0 -->
<P8034>0</P8034>

<!-- # Lookup Display Name -->
<!-- # String -->
<P8036>givenName sn title</P8036>

<!-- ############################################################################## -->
<!-- ##  Settings/General Settings -->
<!-- ############################################################################## -->
<!-- # Local RTP port. Default is 5004 -->
<!-- # Number: 1024 - 65400. Must be even number -->
<!-- # Mandatory -->
<P39>5004</P39>

<!-- # Local RTP port range. Default is 200 -->
<!-- # Number: 48 - 10000 -->
<!-- # Mandatory -->
<P29610>200</P29610>

<!--  Max Local RTP Port. Default is 5204. -->
<!--  Number: 1024 - 65400. -->
<!--  Mandatory -->
<P29608>5204</P29608>

<!-- # Use Random Port. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P78>0</P78>

<!-- # Keep-Alive Interval (in seconds). Default is 20 -->
<!-- # Number: 10 - 160 -->
<!-- # Mandatory -->
<P84>20</P84>

<!-- # Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50 -->
<!-- # String: a-z, A-Z, 0-9, ".", ":" -->
<P101></P101>

<!-- # STUN server -->
<!-- # String -->
<P76></P76>

<!-- # Public Mode. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($public_mode) }
	{if $public_mode|strtolower == 'true'}
		<P1345>1</P1345>
	{elseif $public_mode|strtolower == 'yes'}
		<P1345>1</P1345>
	{elseif $public_mode == '1'}
		<P1345>1</P1345>
	{else}
		<P1345>0</P1345>
	{/if}
{else}
<P1345>0</P1345>
{/if}

<!-- # Delay Registration. Default is 0. -->
<!-- # Number: 0 - 90 -->
<!-- # Mandatory -->
<P8359>0</P8359>

<!-- ############################################################################## -->
<!-- ##  Settings/Broadsoft -->
<!-- ############################################################################## -->
<!-- ################################################################### -->
<!-- # Broadsoft XSI -->
<!-- ################################################################### -->
<!-- # XSI -->
<!-- # Server address -->
<!-- # String -->
<P1591> </P1591>

<!-- # Port -->
<!-- # Number -->
<P1592> </P1592>

<!-- # XSI Actions Path -->
<!-- # String -->
<P2937></P2937>

<!-- # Broadsoft Contact Download Interval. Default is 0. If set to 0, automatic download will be disabled. Valid range is 5 to 720.  -->
<!-- # Number: 5 - 720 -->
<!-- # Mandatory -->
<P8362>0</P8362>

<!-- # XSI Authentication Type. 0 - Login Credentials, 1 - SIP Credentials, 2 - Account 1, 3 - Account 2, 4 - Account 3, 5 - Account 4, 6 - Account 5, 7 - Account 6.  -->
<!-- # Number: 0,1,2,3,4,5,6,7.Default is 0. -->
<!-- # Mandatory -->
<P22054>0</P22054>

<!-- # Login Credentials -->
<!-- # Login Username -->
<!-- # String -->
<P1593></P1593>

<!-- # Login Password -->
<!-- # String -->
<P1594></P1594>

<!-- # SIP Credentials -->
<!-- # SIP UserName  -->
<!-- # String -->
<P6772></P6772>

<!-- # SIP User ID -->
<!-- # String -->
<P22034></P22034>

<!-- # SIP Password  -->
<!-- # String -->
<P6773></P6773>

<!-- # Sort Phonebook by. 0 - Last Name, 1 - First Name. Defaut is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P22131>0</P22131>

<!-- ###################################################################################### -->
<!-- # Network Directories -->
<!-- ###################################################################################### -->
<!-- ### Group Directory ### -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2971>0</P2971>

<!-- # Name.  -->
<!-- # String -->
<P2972></P2972>

<!-- ### Enterprise Directory ### -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2973>0</P2973>

<!-- # Name.  -->
<!-- # String -->
<P2974></P2974>

<!-- ### Group Common ### -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2975>0</P2975>

<!-- # Name.  -->
<!-- # String -->
<P2976></P2976>

<!-- ### Enterprise Common ### -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2977>0</P2977>

<!-- # Name.  -->
<!-- # String -->
<P2978></P2978>

<!-- ### Personal Directory ### -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2979>0</P2979>

<!-- # Name.  -->
<!-- # String -->
<P2980></P2980>

<!-- ### Missed Call Log ###  -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2981>0</P2981>

<!-- # Name.  -->
<!-- # String -->
<P2982></P2982>

<!-- ### Placed Call Log ###  -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2983>0</P2983>

<!-- # Name.  -->
<!-- # String -->
<P2984></P2984>

<!-- ### Received Call Log ###  -->
<!-- # Disabled/Enabled. 0 - Disabled, 1 - Enabled. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P2985>0</P2985>

<!-- # Name.  -->
<!-- # String -->
<P2986></P2986>

<!-- ############################################################################## -->
<!-- ##  Phonebook/Broadsoft Instant Message and Presence -->
<!-- ############################################################################## -->
<!-- # Login Credentials  -->
<!-- # Server. -->
<!-- # String -->
<P6006></P6006>

<!-- # Port.  -->
<!-- # String -->
<P6005></P6005>

<!-- # Username.  -->
<!-- # String -->
<P2966></P2966>

<!-- # Password.  -->
<!-- # String -->
<P2967></P2967>

<!-- # IM&P Settings  -->
<!-- # Broadsoft IM&P. Default is 0. -->
<!-- # Number: 0,1. 1 - Enabled, 0 - Disabled -->
<!-- # Mandatory -->
<P2964>0</P2964>

<!-- # Associated Broadsoft Account. Default is 0. -->
<!-- # Number: 0 - 5 : Account 1 - Account 6 -->
<!-- # Mandatory -->
<P2965>0</P2965>

<!-- # Auto Login. Default is 0. -->
<!-- # 0 - No, 1 - Yes -->
<!-- # Mandatory -->
<P2968>0</P2968>

<!-- # Display Non XMPP Contacts. Default is 0. -->
<!-- # 0 - No, 1 - Yes -->
<!-- # Mandatory -->
<P2969>0</P2969>

<!-- ############################################################################## -->
<!-- ##  Settings/External Service -->
<!-- ############################################################################## -->
<!-- ##  Grandstream Door System -->
<!-- ############################################################### -->
<!-- # Order 1 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32000>-1</P32000>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32001>0</P32001>

<!-- # System Identification -->
<!-- # String -->
<P32002></P32002>

<!-- # System Number -->
<!-- # String -->
<P32003></P32003>

<!-- # Access Password -->
<!-- # String -->
<P32004></P32004>

<!-- ############################################################### -->
<!-- # Order 2 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32005>-1</P32005>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32006>0</P32006>

<!-- # System Identification -->
<!-- # String -->
<P32007></P32007>

<!-- # System Number -->
<!-- # String -->
<P32008></P32008>

<!-- # Access Password -->
<!-- # String -->
<P32009></P32009>

<!-- ############################################################### -->
<!-- # Order 3 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32010>-1</P32010>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32011>0</P32011>

<!-- # System Identification -->
<!-- # String -->
<P32012></P32012>

<!-- # System Number -->
<!-- # String -->
<P32013></P32013>

<!-- # Access Password -->
<!-- # String -->
<P32014></P32014>

<!-- ############################################################### -->
<!-- # Order 4 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32015>-1</P32015>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32016>0</P32016>

<!-- # System Identification -->
<!-- # String -->
<P32017></P32017>

<!-- # System Number -->
<!-- # String -->
<P32018></P32018>

<!-- # Access Password -->
<!-- # String -->
<P32019></P32019>

<!-- ############################################################### -->
<!-- # Order 5 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32020>-1</P32020>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32021>0</P32021>

<!-- # System Identification -->
<!-- # String -->
<P32022></P32022>

<!-- # System Number -->
<!-- # String -->
<P32023></P32023>

<!-- # Access Password -->
<!-- # String -->
<P32024></P32024>

<!-- ############################################################### -->
<!-- # Order 6 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32025>-1</P32025>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32026>0</P32026>

<!-- # System Identification -->
<!-- # String -->
<P32027></P32027>

<!-- # System Number -->
<!-- # String -->
<P32028></P32028>

<!-- # Access Password -->
<!-- # String -->
<P32029></P32029>

<!-- ############################################################### -->
<!-- # Order 7 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32030>-1</P32030>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32031>0</P32031>

<!-- # System Identification -->
<!-- # String -->
<P32032></P32032>

<!-- # System Number -->
<!-- # String -->
<P32033></P32033>

<!-- # Access Password -->
<!-- # String -->
<P32034></P32034>

<!-- ############################################################### -->
<!-- # Order 8 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32035>-1</P32035>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32036>0</P32036>

<!-- # System Identification -->
<!-- # String -->
<P32037></P32037>

<!-- # System Number -->
<!-- # String -->
<P32038></P32038>

<!-- # Access Password -->
<!-- # String -->
<P32039></P32039>

<!-- ############################################################### -->
<!-- # Order 9 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32040>-1</P32040>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32041>0</P32041>

<!-- # System Identification -->
<!-- # String -->
<P32042></P32042>

<!-- # System Number -->
<!-- # String -->
<P32043></P32043>

<!-- # Access Password -->
<!-- # String -->
<P32044></P32044>

<!-- ############################################################### -->
<!-- # Order 10 -->
<!-- ############################################################### -->
<!-- # Service Type. -1 - None, 0 - GDS. Default is -1. -->
<!-- # Number: -1, 0 -->
<!-- # Mandatory: -1 -->
<P32045>-1</P32045>

<!-- # Account -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P32046>0</P32046>

<!-- # System Identification -->
<!-- # String -->
<P32047></P32047>

<!-- # System Number -->
<!-- # String -->
<P32048></P32048>

<!-- # Access Password -->
<!-- # String -->
<P32049></P32049>

<!-- ############################################################################## -->
<!-- ##  Settings/Call Features -->
<!-- ############################################################################## -->
<!-- # Preferred Default Account.  -->
<!-- # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4(For GXP2140/2160/2170 only), 4 - Account 5(For GXP2160/2170 only), 5 - Account 6(For GXP2160/2170 only).  -->
<!-- # Number: 0, 1, 2, 3, 4, 5. Default is 0. -->
<!-- # Mandatory -->
<P29612>0</P29612>

<!-- # Predictive Dialing Feature. 0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P22126>1</P22126>

<!-- # Onhook Dial Barging. 0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8397>1</P8397>

<!-- # Off-hook Auto Dial -->
<!-- # String -->
<P71></P71>

<!-- # Off-hook Auto Dial Delay -->
<!-- # Number: 0 - 10 -->
<P8388>0</P8388>

<!-- # Off-hook Timeout (in seconds). Default is 30 -->
<!-- # Number: 10 - 60 -->
<!-- # Mandatory -->
<P1485>30</P1485>

<!-- # Enable Live DialPad. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8350>0</P8350>

<!-- # Live DialPad Expire Time. Default is 5 -->
<!-- # Number: 2 - 15.  -->
<!-- # Mandatory -->
<P8351>5</P8351>

<!-- # Enable Automatic Redial. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8353>0</P8353>

<!-- # Automatic Redial Times. Default is 10 -->
<!-- # Number -->
<!-- # Mandatory -->
<P8354>10</P8354>

<!-- # Automatic Redial Interval. Default is 20 -->
<!-- # Number -->
<!-- # Mandatory -->
<P8355>20</P8355>

<!-- # Bypass Dial Plan Through Call History and Directories. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6758>0</P6758>

<!-- # Disable Call Waiting. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P91>0</P91>

<!-- # Disable Call Waiting Tone. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P186>0</P186>

<!-- # Ring for Call Waiting. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P22102>0</P22102>

<!-- # Disable Busy Tone on Remote Disconnect. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6762>0</P6762>

<!-- # Disable Direct IP Call. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1310>0</P1310>

<!-- # Use Quick IP call mode. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P184>0</P184>

<!-- # Disable Conference. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1311>0</P1311>

<!-- # Disable in-call DTMF display. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P338>0</P338>

<!-- # Enable Sending DTMF via specific MPKs. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1339>0</P1339>

<!-- # Mute Key Functions While Idle. 0 - DND, 1 - Idle Mute, 2 - Disabled. Default is 0 -->
<!-- # Number: 0,1,2 -->
<!-- # Mandatory -->
<P1565>0</P1565>

<!-- # DND Override. 0 - Off, 1 - Allow All, 2 - Allow Only Contacts, 3 - Allow Only Favourites. Default is 0 -->
<!-- # Number: 0,1,2,3 -->
<!-- # Mandatory -->
<P8372>0</P8372>

<!-- # Disable Transfer. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1341>0</P1341>

<!-- # In-call Dial Number on pressing transfer key -->
<!-- # String -->
<P1525></P1525>

<!-- # Attended Transfer Mode. 0 - Static, 1 - Dynamic. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($grandstream_auto_attended_transfer) }
<P1376>{$grandstream_auto_attended_transfer}</P1376>
{else}
<P1376>1</P1376>
{/if}

<!-- # Transfer Mode Via VPK. 0 - Blind Transfer, 1 - Attended Transfer, 2 - New Call. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8390>0</P8390>

<!-- # Do not Escape '#' as 23% in SIP URL. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1406>0</P1406>

<!-- # Click-To-Dial Feature. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1561>0</P1561>

<!-- # Default call log type. 0 - Default, 1 - Broadsoft Call Log, 2 - Local Call Log. -->
<!-- # Number: 0,1,2. Default is 0. -->
<!-- # Mandatory -->
<P6765>0</P6765>

<!-- # Return Code When Refusing Incoming Call. Default is 0 -->
<!-- # Number: 0,1,2,3. 0 - Busy, 1 - Temporarily Unavailable, 2 - Not Found(404), 3 - Decline(603). -->
<!-- # Mandatory -->
<P8360>0</P8360>

<!-- # Return Code When Enable DND. Default is 0 -->
<!-- # Number: 0,1,2,3. 0 - Busy, 1 - Temporarily Unavailable, 2 - Not Found(404), 3 - Decline(603). -->
<!-- # Mandatory -->
<P8361>0</P8361>

<!-- # Enable BLF Pickup Screen.  0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P9905>0</P9905>

<!-- # Enable BLF Pickup Sound.  0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P9906>0</P9906>

<!-- # Enable BLF Pickup Sound List. 0 - Except List, 1 - Only List. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P9907>0</P9907>

<!-- # BLF Pickup Sound Except List.  -->
<!-- # String -->
<P9908></P9908>

<!-- # BLF Pickup Sound Only List. -->
<!-- # String -->
<P9909></P9909>

<!-- # Local Call Recording Feature. 0 - Disable, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6760>0</P6760>

<!-- # Saved Local Call Recording Location. 0 - Internal Storage 1 - USB. Default is 0. --for GXP2140/2160/2170 only -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6761>0</P6761>

<!-- # Instant Message Popup Timeout -->
<!-- # Number: 10 - 900 -->
<!-- # Mandatory -->
<P26055>10</P26055>

<!-- # Play Tone On Receiving IM. 0 - Disable, 1 - Enable. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P26056>0</P26056>

<!-- # User-Agent Prefix -->
<!-- # String -->
<P8358></P8358>

<!-- # Auto Provision List Starting Point. 0 - Extension Boards, 1 - VPK, 2 - MPK. -->
<!-- # For GXP2140/GXP2170--Number: 0, 1. Default is 0 -->
<!-- # For GXP2130/GXP2160--Number: 1, 2. Default is 1 -->
<!-- # Mandatory -->
<!-- #P8349 = 0 -->
<!--   -->
<!-- # Hide BLF Remote Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8374>0</P8374>

<!-- # Show SIP Error Response. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8376>1</P8376>

<!-- # Enable Missed Call Notification. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8393>0</P8393>

<!-- # Enable Call Completion Service. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8391>0</P8391>

<!-- ############################################################################## -->
<!-- ##  Settings/Call History -->
<!-- ############################################################################## -->

<!-- ############################################################################## -->
<!-- ##  Settings/Multicast Paging -->
<!-- ############################################################################## -->
<!-- # Allowed in DND Mode. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8381>0</P8381>

<!-- # Paging Barge. 0 - Disable, 1 - priority 1, 2 - priority 2, 3 - priority 3,  -->
<!-- # 4 - priority 4, 5 - priority 5, 6 - priority 6, 7 - priority 7, 8 - priority 8, -->
<!-- # 9 - priority 9, 10 - priority 10. Default is 0. -->
<!-- # Number: 0 - 10 -->
<!-- # Mandatory -->
<P1566>0</P1566>

<!-- # Paging Priority Active. 0 - Disabled, 1 - Enabled -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1567>0</P1567>

<!-- # Multicast Paging Codec. 18 - G.729A/B, 0 - PCMU, 8 - PCMA, 2 - G.726-32, 9 - G.722, 98 - iLBC, 4- G.723.1 -->
<!-- # Number: 18, 0, 8, 2, 9, 98, 4. Default is 0. -->
<!-- # Mandatory -->
<P1568>0</P1568>

<!-- ### Multicast Listening ###  -->
<!-- # Priority 1 -->
<!-- # Listening Address -->
<!-- # String -->
<P1569></P1569>

<!-- # Label -->
<!-- # String -->
<P1570></P1570>

<!-- # Priority 2 -->
<!-- # Listening Address -->
<!-- # String -->
<P1571></P1571>

<!-- # Label -->
<!-- # String -->
<P1572></P1572>

<!-- # Priority 3 -->
<!-- # Listening Address -->
<!-- # String -->
<P1573></P1573>

<!-- # Label -->
<!-- # String -->
<P1574></P1574>

<!-- # Priority 4 -->
<!-- # Listening Address -->
<!-- # String -->
<P1575></P1575>

<!-- # Label -->
<!-- # String -->
<P1576></P1576>

<!-- # Priority 5 -->
<!-- # Listening Address -->
<!-- # String -->
<P1577></P1577>

<!-- # Label -->
<!-- # String -->
<P1578></P1578>

<!-- # Priority 6 -->
<!-- # Listening Address -->
<!-- # String -->
<P1579></P1579>

<!-- # Label -->
<!-- # String -->
<P1580></P1580>

<!-- # Priority 7 -->
<!-- # Listening Address -->
<!-- # String -->
<P1581></P1581>

<!-- # Label -->
<!-- # String -->
<P1582></P1582>

<!-- # Priority 8 -->
<!-- # Listening Address -->
<!-- # String -->
<P1583></P1583>

<!-- # Label -->
<!-- # String -->
<P1584></P1584>

<!-- # Priority 9 -->
<!-- # Listening Address -->
<!-- # String -->
<P1585></P1585>

<!-- # Label -->
<!-- # String -->
<P1586></P1586>

<!-- # Priority 10 -->
<!-- # Listening Address -->
<!-- # String -->
<P1587></P1587>

<!-- # Label -->
<!-- # String -->
<P1588></P1588>

<!-- ############################################################################## -->
<!-- ##  Settings/Outbound Notification -->
<!-- ############################################################################## -->
<!-- ###################################################################################### -->
<!-- # Action URL -->
<!-- ###################################################################################### -->
<!-- # Setup Completed.  -->
<!-- # String -->
<P8304></P8304>

<!-- # Registered. -->
<!-- # String -->
<P8305></P8305>

<!-- # Unregistered. -->
<!-- # String -->
<P8306></P8306>

<!-- # Off Hook. -->
<!-- # String -->
<P8308></P8308>

<!-- # On Hook. -->
<!-- # String -->
<P8309></P8309>

<!-- # Incoming Call. -->
<!-- # String -->
<P8310></P8310>

<!-- # Outgoing Call -->
<!-- # String -->
<P8311></P8311>

<!-- # Missed Call -->
<!-- # String -->
<P8312></P8312>

<!-- # Established Call -->
<!-- # String  -->
<P8313></P8313>

<!-- # Terminated Call -->
<!-- # String -->
<P8314></P8314>

<!-- # Open DND -->
<!-- # String -->
<P8316></P8316>

<!-- # Close DND -->
<!-- # String -->
<P8317></P8317>

<!-- # Open Forward -->
<!-- # String -->
<P8318></P8318>

<!-- # Close Forward -->
<!-- # String -->
<P8319></P8319>

<!-- # Blind Transfer -->
<!-- # String -->
<P8320></P8320>

<!-- # Attended Transfer -->
<!-- # String -->
<P8321></P8321>

<!-- # Hold Call -->
<!-- # String -->
<P8324></P8324>

<!-- # UnHold Call -->
<!-- # String -->
<P8325></P8325>

<!-- ###################################################################################### -->
<!-- # Destination -->
<!-- ###################################################################################### -->

<!-- ###################################################################################### -->
<!-- # Notification -->
<!-- ###################################################################################### -->

<!-- ############################################################################## -->
<!-- ##  Settings/Preferences -->
<!-- ############################################################################## -->
<!-- ############################################################################## -->
<!-- ##  Settings/Preferences / Audio Control -->
<!-- ############################################################################## -->
<!-- # HEADSET Key Mode. 0 - Default Mode, 1 - Toggle Headset/Speaker. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1312>0</P1312>

<!-- # Headset Type. 0 - Normal, 1 - Plantronics EHS. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P6779>0</P6779>

<!-- # EHS Headset Ring Tone. 0 - Normal, 1 - Plantronics EHS. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1487>0</P1487>

<!-- # Always Ring Speaker. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1439>0</P1439>

<!-- # Headset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1301>0</P1301>

<!-- # Headset RX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1302>0</P1302>

<!-- # Handset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1464>0</P1464>

<!-- ############################################################################## -->
<!-- ##  Settings/Preferences / Date and Time -->
<!-- ############################################################################## -->
<!-- # NTP Server -->
<!-- # String -->
{if isset($ntp_server_primary)}
<P30>{$ntp_server_primary}</P30>
{else}
<P30>pool.ntp.org</P30>
{/if}

<!-- # Secondary NTP Server -->
<!-- # String -->
{if isset($ntp_server_secondary)}
<P8333>{$ntp_server_secondary}</P8333>
{else}
<P8333></P8333>
{/if}

<!-- # NTP Update Interval -->
<!-- # String -->
<!-- # Number: 5 - 1440， Default is 1440  -->
<P5005>1440</P5005>

<!-- # Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is 1 -->
<!-- # When set to Yes(1), it will override the configured NTP server -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P144>1</P144>

<!-- # Time Zone -->
<!-- # P value                                                                                         Web GUI Option  -->

<!-- # auto                                                                                               Automatic -->
<!-- # TZA+12                                                                                        GMT-12:00 (International Date Line West) -->
<!-- # TZB+11                                                                                        GMT-11:00 (Midway Island, Samoa)  -->
<!-- # HAW10                                                                                         GMT-10:00 (US Hawaiian Time)  -->
<!-- # AKST9AKDT                                                                                GMT-9:00 (US Alaska Time)  -->
<!-- # PST8PDT                                                                                     GMT-8:00 (US Pacific Time, Los Angeles) -->
<!-- # PST8PDT,M4.1.0,M10.5.0                                                            GMT-08:00 (Baja California) -->
<!-- # MST7MDT                                                                                     GMT-07:00 (US Mountain Time, Denver)  -->
<!-- # MST7                                                                                              GMT-07:00 (Mountain Time (Arizona, no DST))  -->
<!-- # MST7MDT,M4.1.0,M10.5.0                                                             GMT-07:00 (Chihuahua, La Paz, Mazatlan) -->
<!-- # CST6CDT                                                                                       GMT-06:00 (Central Time)  -->
<!-- # CST+6                                                                                            GMT-06:00 (Central America)  -->
<!-- # CST6CDT,M4.1.0,M10.5.0                                                              GMT-06:00 (Guadalajara, Mexico City, Monterrey) -->
<!-- # EST5EDT                                                                                       GMT-05:00 (Eastern Time) -->
<!-- # EST5                                                                                               GMT-05:00 (Eastern Time without daylight saving)  -->
<!-- # TZf+4:30                                                                                         GMT-04:30 (Caracas)  -->
<!-- # AST4ADT                                                                                       GMT-04:00 (Atlantic Time)  -->
<!-- # AST4ADT,M4.1.0/00:01:00,M10.5.0/00:01:00                                  GMT-04:00 (Atlantic Time (New Brunswick))  -->
<!-- # NST+3:30NDT+2:30,M3.2.0/00:01:00,M11.1.0/00:01:00                    GMT-03:30 (Newfoundland Time)  -->
<!-- # TZK+3                                                                                              GMT-03:00 (Greenland)  -->
<!-- # BRST+3BRDT+2,M10.3.0,M2.3.0                                                       GMT-03:00 (Brazil, Sao Paulo)  -->
<!-- # UTC+3                                                                                              GMT-02:00 (Argentina)  -->
<!-- # TZL+2                                                                                               GMT-02:00 (Mid-Atlantic)  -->
<!-- # TZM+1                                                                                              GMT-01:00 (Azores, Cape Verdi Is.)  -->
<!-- # TZN+0                                                                                              GMT (Edinburgh, Casablanca, Monrovia)  -->
<!-- # GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                              GMT (London, Great Britain)  -->
<!-- # WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                           GMT (Lisbon, Portugal)  -->
<!-- # GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                               GMT (Dublin, Ireland)  -->
<!-- # CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00                             GMT+01:00 (Paris, Vienna, Warsaw, Roma, Madrid, Prague, Berlin, Budapest, Amsterdam, Belgium)   -->
<!-- # TZP-2                                                                                               GMT+02:00 (Israel, Cairo, Athens, Istanbul, Buchrest)  -->
<!-- # EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00                         GMT+02:00 (Helsinki, Athens, Tallinn)  -->
<!-- # EET-2EEST,M3.5.0/3,M10.5.0/4                                                   GMT+02:00 (Kyiv, Ukraine)  -->
<!-- # TZQ-3                                                                                               GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi)  -->
<!-- # MSK-3                                                                                           GMT+03:00 (Moscow, Russia)  -->
<!-- # TZR-4                                                                                               GMT+04:00 (Abu Dhabi, Baku)  -->
<!-- # TZS-5                                                                                               GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)  -->
<!-- # TZT-5:30                                                                                          GMT+05:30 (Chennai, New Delhi, Mumbai)  -->
<!-- # TZU-5:45                                                                                          GMT+05:45 (Kathmandu)  -->
<!-- # TZV-6                                                                                               GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk)  -->
<!-- # TZW-6:30                                                                                        GMT+06:30 (Rangoon)  -->
<!-- # TZX-7                                                                                               GMT+07:00 (Bankok, Hanoi, Krasnoyarsk)  -->
<!-- # WIB-7                                                                                               GMT+07:00 (Jakarta)  -->
<!-- # TZY-8                                                                                               GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk)  -->
<!-- # SGT-8                                                                                              GMT+08:00 (Singapore)  -->
<!-- # ULAT-8                                                                                            GMT+08:00 (Ulaanbaatar, Mongolia)  -->
<!-- # WST-8                                                                                             GMT+08:00 (Perth)  -->
<!-- # TZZ-9                                                                                               GMT+09:00 (Japan, Korea, Yakutsk)  -->
<!-- # CST-9:30CDT-10:30,M10.5.0/02:00:00,M3.5.0/03:00:00                     GMT+09:30 (Adelaide)  -->
<!-- # CST-9:30                                                                                          GMT+09:30 (Darwin)  -->
<!-- # TZb-10                                                                                              GMT+10:00 (Guam)  -->
<!-- # EST-10EDT-11,M10.1.0/02:00:00,M3.5.0/03:00:00                              GMT+10:00 (Hobart)  -->
<!-- # EST-10EDT-11,M10.5.0/02:00:00,M3.5.0/03:00:00                               GMT+10:00 (Sydney, Melbourne, Canberra)  -->
<!-- # EST-10                                                                                              GMT+10:00 (Brisbane)  -->
<!-- # TZc-11                                                                                               GMT+11:00 (Magadan, Solomon Is., New Caledonia)  -->
<!-- # NZST-12NZDT-13,M9.5.0/02:00:00,M3.5.0/03:00:00                              GMT+12:00 (Auckland, Wellington)  -->
<!-- # TZd-12                                                                                               GMT+12:00 (Fiji)  -->
<!-- # TZe-13                                                                                               GMT+13:00 (Nuku'alofa)  -->
<!-- # customize                                                                                          Self-Defined Time Zone -->

<!-- # String -->
<!-- # Mandatory -->
{if isset($grandstream_timezone) }
<P64>{$grandstream_timezone}</P64>
{elseif isset($grandstream_gxp_time_zone) }
<P64>{$grandstream_gxp_time_zone}</P64>
{else}
<P64>auto</P64>
{/if}

<!-- # Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes. Default is 1 -->
<!-- # When set to Yes(1), it will override the configured Time Zone setting if available  -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P143>1</P143>

<!-- # Self Defined Time zone. Max length allowed is 64 characters -->
<!-- # String -->
<!-- # Mandatory -->
<P246>MTZ+6MDT+5,M4.1.0,M11.1.0</P246>

<!-- # Date Display Format -->
<!-- # 0: yyyy-mm-dd      eg. 2011-10-31 -->
<!-- # 1: mm-dd-yyyy      eg. 10-31-2011 -->
<!-- # 2: dd-mm-yyyy      eg. 31-10-2011 -->
<!-- # 3: dddd, MMMM dd   eg. Monday, October 31 -->
<!-- # 4: MMMM dd, dddd   eg. October 31, Monday -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P102>3</P102>

<!-- # Time Display Format. 0 - 12 Hour, 1 - 24 Hour -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P122>0</P122>

<!-- # Show Date On Status Bar. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8387>0</P8387>

<!-- ############################################################################## -->
<!-- ##  Settings/Preferences / LCD Display -->
<!-- ############################################################################## -->
<!-- # Backlight Brightness. -->
<!-- # Active. Default is 100. -->
<!-- # Number: 10 - 100 -->
<!-- # Mandatory -->
<P334>100</P334>

<!-- # Idle. Default is 60. -->
<!-- # Number: 0 - 100 -->
<!-- # Mandatory -->
<P335>60</P335>

<!-- # Active Backlight Timeout. Default is 1 -->
<!-- # Number: 1 - 90 -->
<!-- # Mandatory -->
<P8356>1</P8356>

<!-- # Disable Missed Call Backlight. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P351>0</P351>


<!-- # Wallpaper Settings -->
<!-- # Wallpaper Source. 0 - Default, 1 - Download, 2-USB(for GXP2140/2160/2170 only), 3 - Uploaded, 4 - Color Background -->
<!-- # Number: 0-4 -->
<!-- # Mandatory -->
<!-- <P2916>0</P2916> -->

<!-- # Wallpaper Server Path -->
<!-- # String  -->
{if isset($grandstream_wallpaper_url)}
<P2916>1</P2916>
<P2917>{$grandstream_wallpaper_url}</P2917>
{else}
<P2916>0</P2916>
<P2917></P2917>
{/if}

<!-- # Color Background. Default is #000000. -->
<!-- # String -->
<P2921>#000000</P2921>

<!-- # Screensaver Settings -->
<!-- # Screensaver. 0 - No, 1 - Yes, 2 - On if no VPK is active. Default is 1 -->
<!-- # Mandatory -->
{if isset($grandstream_screensaver)}
<P2918>{$grandstream_screensaver}</P2918>
{else}
<P2918>1</P2918>
{/if}

<!-- # Screensaver Source.  0 - Default, 1 - USB, 2 - Download. Default is 0. --for GXP2140/2160/2170 only -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
{if isset($grandstream_screensaver_source)}
<P6759>{$grandstream_screensaver_source}</P6759>
{else}
<P6759>0</P6759>
{/if}

<!-- # Show Date and Time. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($grandstream_screensaver_show_date_time)}
<P8441>{$grandstream_screensaver_show_date_time}</P8441>
{else}
<P8441>1</P8441>
{/if}

<!-- # Screensaver Timeout. Minutes. -->
<!-- # Number: 3 - 60 -->
<!-- # Mandatory -->
{if isset($grandstream_screensaver_timeout)}
<P2919>{$grandstream_screensaver_timeout}</P2919>
{else}
<P2919>5</P2919>
{/if}

<!-- # Screensaver Server Path. -->
<!-- # String -->
{if isset($grandstream_screensaver_server_path)}
<P934>{$grandstream_screensaver_server_path}</P934>
{else}
<P934></P934>
{/if}

<!-- Screensaver XML Download Interval -->
<!-- # Number: 5 - 720. Default is 0 (disable auto downloading) -->
<!-- # Mandatory -->
{if isset($grandstream_screensaver_xml_download_interval)}
<P935>{$grandstream_screensaver_xml_download_interval}</P935>
{else}
<P935>0</P935>
{/if}

<!-- ############################################################################## -->
<!-- ##  Settings/Preferences / LED Control -->
<!-- ############################################################################## -->
<!-- # BLF LED Pattern. 0 - Default, 1 - Analog, 2 - Directional, 3 - Reserved(Red), 4 - Reserved(Green), 5 - Inverse. Default is 0 -->
<!-- # Number: 0 - 5  -->
<!-- # Mandatory -->
<P6766>0</P6766>

<!-- # Disable VM/MSG power light flash. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8371>0</P8371>


<!-- ############################################################################## -->
<!-- ##  Settings/Preferences / Ring Tone -->
<!-- ############################################################################## -->

<!-- ### Call Progress Tones ### -->
<!-- # Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];  -->
<!-- # (Frequencies are in Hz and cadence on and off are in 10ms)  -->

<!-- # System Ring Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P345>f1=440,f2=480,c=200/400;</P345>

<!-- # Dial Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P343>f1=350,f2=440;</P343>

<!-- # Second Dial Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P2909>f1=350,f2=440;</P2909>

<!-- # Message Waiting Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P344>f1=350,f2=440,c=10/10;</P344>

<!-- # Ring Back Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P346>f1=440,f2=480,c=200/400;</P346>

<!-- # Call-Waiting Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P347>f1=440,f2=440,c=25/525;</P347>

<!-- # Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P1555>0</P1555>

<!-- # Busy Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P348>f1=480,f2=620,c=50/50;</P348>

<!-- # Reorder Tone -->
<!-- # String -->
<!-- # Mandatory -->
<P349>f1=480,f2=620,c=25/25;</P349>

<!-- # Speaker Ring Volume -->
<!-- # Number: 0-7. Default is 5. -->
<!-- # Mandatory -->
<P8352>5</P8352>

<!-- # Notification Tone Volume -->
<!-- # Number: 0-7. Default is 5. -->
<!-- # Mandatory -->
<P8399>5</P8399>

<!-- # Lock Volumne. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8392>0</P8392>

<!-- # Default Ringtone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3, 4 - silent. Default is 0 -->
<!-- # Number: 0, 1, 2, 3, 4 -->
<!-- # Mandatory -->
<P8398>0</P8398>


<!-- ############################################################################## -->
<!-- ##  Settings/Web Service -->
<!-- ############################################################################## -->
<!-- # Weather Update -->

<!-- # Use Auto Location Service. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8338>1</P8338>

<!-- # Enable weather update. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1402>1</P1402>

<!-- # City Code -->
<!-- # 0 - Self-Defined City Code, 1 - Automatic. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
{if isset($grandstream_city_code)}
<P1405>0</P1405>
{else}
<P1405>1</P1405>
{/if}


<!-- # Self-Defined City Code -->
<!-- # String -->
<P1377>{$grandstream_city_code}</P1377>

<!-- # Update Interval (in minutes). Default is 15 -->
<!-- # Number: 5 - 360 -->
<!-- # Mandatory -->
<P1378>15</P1378>

<!-- # Degree Unit. auto - Automatic, f - Fahrenheit, c - Celsius. Default is auto -->
<!-- # String: auto, f, c -->
<!-- # Mandatory -->
<P1379>{if isset ($grandstream_temp_unit)}
<P1379>{}$grandstream_temp_unit}</P1379>
{else}
<P1379>auto</P1379>
{/if}

<!-- # Currency Update -->
<!-- # Enable Currency update. 0 - No, 1 - Yes. Default is 1 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P1404>1</P1404>

<!-- # Currency Code -->
<!-- # String -->
<!-- # Mandatory -->
<P1381>EUR/USD;GBP/USD;CAD/USD;AUD/USD;CNY/USD;JPY/USD</P1381>

<!-- ############################################################################## -->
<!-- ##  Settings/XML Applications -->
<!-- ############################################################################## -->
<!-- # Server Path -->
<!-- # String -->
<P337></P337>

<!-- # Softkey Label -->
<!-- # String -->
<P352>XMLApp</P352>

<!-- # Default Background Color -->
<!-- # String -->
<P8367></P8367>

<!-- # Block Call Screen. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8368>0</P8368>

<!-- ############################################################################## -->
<!-- ##  Settings/Programmable Keys -->
<!-- ############################################################################## -->
<!-- ############################################################################## -->
<!-- ##  Settings/Programmable Keys / Virtual Multi-Purpose Keys Settings -->
<!-- ############################################################################## -->
<!-- # Idle Screen Settings -->
<!-- # Show Label Background. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8345>0</P8345>

<!-- # Use Long Label. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8346>0</P8346>

<!-- # Call Screen Settings -->
<!-- # Key Mode. 1 - Line Mode, 2 - Account Mode. Default is 1 -->
<!-- # Number: 1, 2 -->
<!-- # Mandatory -->
<P8369>1</P8369>

<!-- # Show VPK Icon. 0 - No, 1 - Yes. Default is 0 (For GXP2140/2160/2170 only) -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2936>0</P2936>

<!-- # Show Keys Label. 1 - Show, 2 - Hide, 0 - Toggle. Default is 0 -->
<!-- # Number: 0, 1, 2 -->
<!-- # Mandatory -->
<P8386>0</P8386>

<!-- ############################################################################## -->
<!-- ##  Settings/Programmable Keys/Virtual Multi-Purpose Keys -->
<!-- ############################################################################## -->
<!-- ###################################################################################### -->
<!-- # Virtual Multi-Purpose Keys (VPKs) -->
<!-- # Note: 1. Fixed VPKs can only be edited. Adding or deleting Fixed VPK is not allowed. -->
<!-- #          2. Even if a Dynamic VPK has mode set to None, it should be added in sequence. Skipping one will remove everything after that VPK.  -->
<!-- ###################################################################################### -->




<!-- Keys 1 to 6 are have a different 'P' ID than 7 to 24 so there are two loops below -->

<!-- Set $fixed_keys variable below and the rest should work -->
<!-- detect with $template == grandstream/gxp21xx  2130=3fixed 2140=4fixed 2160=6fixed 2170=12fixed 2135=8fixed -->
{$fixed_keys=4}
{if $template == "grandstream/gxp2130"}{$fixed_keys=3}{/if}
{if $template == "grandstream/gxp2140"}{$fixed_keys=4}{/if}
{if $template == "grandstream/gxp2160"}{$fixed_keys=6}{/if}
{if $template == "grandstream/gxp2170"}{$fixed_keys=12}{/if}
{if $template == "grandstream/gxp2135"}{$fixed_keys=8}{/if}
<!-- Detected {$template} with {$fixed_keys} fixed keys -->
{$start_id=1363}
{assign var=key_types value=["none"=>-1,"line"=>0,"shared line"=>1,"speed dial"=>10, "blf"=>11, "presence watcher"=>12, "eventlist blf"=>13,"speed dial active"=>14,"dial dtmf"=>15,"voicemail"=>16,"call return"=>17,"transfer"=>18,"call park"=>19,"intercom"=>20,"ldap search"=>21,"multicast paging"=>23,"record"=>24,"call log"=>25,"monitored call park"=>26,"menu"=>27]}

{for $line=1 to 6}
{$pid=$line*2-2}
{if isset($keys.line.$line.device_key_category) && isset($keys.line.$line.device_key_type) && isset($key_types[$keys.line.$line.device_key_type])}
{if $line <= $fixed_keys}
<P{$start_id+$pid}>{$key_types[$keys.line.$line.device_key_type]}</P{$start_id+$pid}>
{else}
<P{$start_id+$pid}>{$key_types[$keys.line.$line.device_key_type]-10}</P{$start_id+$pid}>
{/if}
<P{$start_id+$pid+1}>{$keys.line.$line.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+102}>{$keys.line.$line.device_key_label}</P{$start_id+$pid+102}>
<P{$start_id+$pid+103}>{$keys.line.$line.device_key_value}</P{$start_id+$pid+103}>
{else}
{if $line <= $fixed_keys}
<P{$start_id+$pid}>0</P{$start_id+$pid}>
<P{$start_id+$pid+1}>{$line-1}</P{$start_id+$pid+1}>
<P{$start_id+$pid+102}></P{$start_id+$pid+102}>
<P{$start_id+$pid+103}></P{$start_id+$pid+103}>
{else}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
{/if}
{/if}

{/for}

<!-- line 7 to 48 are sequential starting at 23800 in groups of 4 -->
{$start_id=23800}
{for $line=7 to 48}
{$pid=($line-6)*4-4}
{if isset($keys.line.$line.device_key_category) && isset($keys.line.$line.device_key_type) && isset($key_types[$keys.line.$line.device_key_type])}
{if $line <= $fixed_keys}
<P{$start_id+$pid}>{$key_types[$keys.line.$line.device_key_type]}</P{$start_id+$pid}>
{else}
<P{$start_id+$pid}>{$key_types[$keys.line.$line.device_key_type]-10}</P{$start_id+$pid}>
{/if}
<P{$start_id+$pid+1}>{$keys.line.$line.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}>{$keys.line.$line.device_key_label}</P{$start_id+$pid+2}>
<P{$start_id+$pid+3}>{$keys.line.$line.device_key_value}</P{$start_id+$pid+3}>
{else}
{if $line <= $fixed_keys}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
<P{$start_id+$pid+1}>0</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}></P{$start_id+$pid+2}>
<P{$start_id+$pid+3}></P{$start_id+$pid+3}>
{else}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
{/if}
{/if}

{/for}


<!-- ###################################################################################### -->
<!-- ## Programmable Keys/Physical Multi-Purpose Keys - GXP2130/2160 only -->
<!-- ###################################################################################### -->
<!-- # MPK 1- GXP2130/2160 only -->
<!-- ###################################################################################### -->


{assign var=key_types value=["none"=>-1,"speed dial"=>0, "blf"=>1, "presence watcher"=>2, "eventlist blf"=>3,"speed dial active"=>4,"dial dtmf"=>5,"voicemail"=>6,"call return"=>7,"transfer"=>8,"call park"=>9,"intercom"=>10,"ldap search"=>11,"conference"=>12,"multicast paging"=>13,"record"=>14,"call log"=>15,"monitored call park"=>16,"menu"=>17]}
{$start_id=323}
{for $mem=1 to 7}
{$pid=$mem*3-3}
{if isset($keys.memory.$mem.device_key_category) && isset($keys.memory.$mem.device_key_type) && $keys.memory.$mem.device_key_type|in_array:$key_types}
<!-- # Key Mode. -->
<!-- # Number: -1 -- 20 -->
<!-- # -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher -->
<!-- # 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF -->
<!-- # 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom -->
<!-- # 11 - LDAP Search, 12 - Conference, 13 - Multicast Paging, 14 - Record, 15 - Call Log -->
<!-- # 16 - Monitored Call Park, 17 - Menu 18- XML Application,19 - Information, 20 - Message -->
<!-- # Mandatory -->
<P{$start_id+$mem-1}>{$key_types[$keys.memory.$mem.device_key_type]}</P{$start_id+$mem-1}>
<!-- # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 -->
<!-- # Number: 0, 1, 2, 3, 4, 5 -->
<!-- # Mandatory -->
<P{$start_id+$pid-22}>{$keys.memory.$mem.device_key_line}</P{$start_id+$pid-22}>
<!-- # Name. Max length allowed is 128 characters. -->
<!-- # String -->
<P{$start_id+$pid-21}>{$keys.memory.$mem.device_key_label}</P{$start_id+$pid-21}>
<!-- # User ID.  Max length allowed is 64 characters. -->
<!-- # String -->
<P{$start_id+$pid-20}>{$keys.memory.$mem.device_key_value}</P{$start_id+$pid-20}>
{else}
<P{$start_id+$mem-1}>-1</P{$start_id+$mem-1}>
<P{$start_id+$pid-22}>0</P{$start_id+$pid-22}>
<P{$start_id+$pid-21}></P{$start_id+$pid-21}>
<P{$start_id+$pid-20}></P{$start_id+$pid-20}>
{/if}

{/for}

{$start_id=353}
{for $mem=8 to 18}
{$pid=($mem-7)*4-4}
{if isset($keys.memory.$mem.device_key_category) && isset($keys.memory.$mem.device_key_type) && $keys.line.$line.device_key_type|in_array:$key_types}
<P{$start_id+$pid}>{$key_types[$keys.memory.$mem.device_key_type]}</P{$start_id+$pid}>
<P{$start_id+$pid+1}>{$keys.memory.$mem.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}>{$keys.memory.$mem.device_key_label}</P{$start_id+$pid+2}>
<P{$start_id+$pid+3}>{$keys.memory.$mem.device_key_value}</P{$start_id+$pid+3}>
{else}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
<P{$start_id+$pid+1}>0</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}></P{$start_id+$pid+2}>
<P{$start_id+$pid+3}></P{$start_id+$pid+3}>
{/if}

{/for}


{$start_id=1440}
{for $mem=19 to 24}
{$pid=($mem-18)*4-4}
{if isset($keys.memory.$mem.device_key_category) && isset($keys.memory.$mem.device_key_type) && $keys.line.$line.device_key_type|in_array:$key_types}
<P{$start_id+$pid}>{$key_types[$keys.memory.$mem.device_key_type]}</P{$start_id+$pid}>
<P{$start_id+$pid+1}>{$keys.memory.$mem.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}>{$keys.memory.$mem.device_key_label}</P{$start_id+$pid+2}>
<P{$start_id+$pid+3}>{$keys.memory.$mem.device_key_value}</P{$start_id+$pid+3}>
{else}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
<P{$start_id+$pid+1}>0</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}></P{$start_id+$pid+2}>
<P{$start_id+$pid+3}></P{$start_id+$pid+3}>
{/if}

{/for}



<!-- ############################################################################## -->
<!-- ##  Settings/Programmable Keys / Softkeys Settings -->
<!-- ############################################################################## -->
<!-- # More Softkey Display Mode -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # 0 - Menu, 1 - Toggle -->
<!-- # Mandatory -->
<P2934>0</P2934>

<!-- # Show Target Softkey -->
<!-- # Number: 0, 1. Default is 1 -->
<!-- # 0 - No, 1 - Yes -->
<!-- # Mandatory -->
<P8377>1</P8377>

<!-- # Softkey Layout -->
<!-- # Custom Softkey Layout. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2923>0</P2923>

<!-- # Enforce Softkey Layout Position. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P2924>0</P2924>

<!-- # Hide System Softkey on Main Page.  -->
<!-- # String: Next, History, ForwardAll, Redial -->
<P8348></P8348>

<!-- ## Custom Call Screen Softkey Layout ## -->
<!-- # Softkey layout in dialing state -->
<!-- # String: BTPhonebook,BTOnOff,EndCall,ReConf,ConfRoom,Redial,Dial,Backspace,PickUp,Target  -->
<P2925>BTPhonebook,BTOnOff,EndCall,ReConf,ConfRoom,Redial,Dial,Backspace,PickUp,Target</P2925>

<!-- # Softkey layout in onhook dialing state -->
<!-- # String: BTPhonebook,DirectIP,Onhook,Cancel,Dial,Backspace,Target, -->
<P2935>BTPhonebook,DirectIP,Onhook,Cancel,Dial,Backspace,Target</P2935>

<!-- # Softkey layout in ringing state -->
<!-- # String: Answer, Reject, Forward, ReConf,Custom-Silence  -->
<P2926>Answer,Reject,Forward,ReConf</P2926>

<!-- # Softkey layout in calling state -->
<!-- # String: BTOnOff,EndCall,ReConf,ConfRoom,ConfCall  -->
<P2927>BTOnOff,EndCall,ReConf,ConfRoom,ConfCall</P2927>

<!-- # Softkey layout in Call Connected state  -->
<!-- # String: BTPhonebook,BTOnOff,EndCall,ReConf,ConfRoom,ConfCall,Cancel,NewCall,Swap,Transfer,Trnf>VM,DialDTMF,BSCCenter,URecord,Record,UCallPark,PrivateHold,CallPark, -->
<!-- # Custom-Hold,Custom-Conference,Custom-Mute -->
<P2928> BTPhonebook,BTOnOff,EndCall,ReConf,ConfRoom,ConfCall,Cancel,NewCall,Swap,Transfer,Trnf&gt;VM,DialDTMF,BSCCenter,URecord,Record,UCallPark,PrivateHold,CallPark</P2928>

<!-- # Softkey layout In conference connected state -->
<!-- # String: BTOnOff,EndCall,Kick,NewCall,Trnf>VM,DialDTMF,BSCCenter,URecord,Record,ConfRoom,Add,Custom-Hold,Custom-Split,Custom-Mute -->
<P2933>BTOnOff,EndCall,Kick,NewCall,Trnf&gt;VM,DialDTMF,BSCCenter,URecord,Record,ConfRoom,Add</P2933>

<!-- # Softkey layout in onhold state -->
<!-- # String: ReConf,Resume,HoldTrnf,ConfCall,Add,Custom-NewCall,Custom-EndCall -->
<P2929>ReConf,Resume,HoldTrnf,ConfCall,Add</P2929>

<!-- # Softkey layout in call failed state -->
<!-- # String: EndCall,ReCOnf,ConfRoom,Custom-NewCall -->
<P2930>EndCall,ReConf,ConfRoom</P2930>

<!-- # Softkey layout in call transfer state -->
<!-- # String: BTOnOff,Cancel,BlindTrnf,AttTrnf,Backspace,Target -->
<P2931>BTOnOff,Cancel,BlindTrnf,AttTrnf,Backspace,Target</P2931>

<!-- # Softkey layout in conference state -->
<!-- # String:BTOnOff,Cancel,Dial,Backspace,Target -->
<P2932>BTOnOff,Cancel,Dial,Backspace,Target</P2932>

<!-- ###################################################################################### -->
<!-- ## Programmable Keys/Softkeys -->
<!-- ###################################################################################### -->
<!-- # Softkey 1 to 3-->
<!-- ###################################################################################### -->
<!-- # Key Mode. -->
<!-- # 0 - Default, 10 - Speed Dial, 14 - Speed Dial via active account, 16 - Voicemail,  -->
<!-- # 17 - CallReturn, 20 - Intercom, 21 - LDAP Search, 25 - Call Log, 27 - Menu, 29 - Information, 30 - Message -->
<!-- # Number: 0,10,14,16,17,20,21,25,27,29,30 -->
<!-- # Mandatory -->


{assign var=key_types value=["speed dial"=>10, "speed dial active"=>14,"voicemail"=>16,"call return"=>17,"intercom"=>20,"ldap search"=>21,"menu"=>27]}
{$start_id=2987}
{for $prog=1 to 3}
{$pid=$prog*4-4}
{if isset($keys.programmable.$prog.device_key_category) && isset($keys.programmable.$prog.device_key_type) && $keys.programmable.$prog.device_key_type|in_array:$key_types}
<P{$start_id+$pid}>{$key_types[$keys.programmable.$prog.device_key_type]}</P{$start_id+$pid}>
<P{$start_id+$pid+1}>{$keys.programmable.$prog.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}>{$keys.programmable.$prog.device_key_label}</P{$start_id+$pid+2}>
<P{$start_id+$pid+3}>{$keys.programmable.$prog.device_key_value}</P{$start_id+$pid+3}>
{else}
<P{$start_id+$pid}>0</P{$start_id+$pid}>
<P{$start_id+$pid+1}>0</P{$start_id+$pid+1}>
<!-- <P{$start_id+$pid+2}></P{$start_id+$pid+2}> -->
<!-- <P{$start_id+$pid+3}></P{$start_id+$pid+3}> -->
{/if}

{/for}


<!-- ######################################################################## -->
<!-- ##          Settings/Extension Boards - GXP2140/GXP2170 only  -->
<!-- ######################################################################## -->

<!-- ######################################################################## -->
<!-- ##           Settings/Extension Boards/EXT Setting -->
<!-- ######################################################################## -->
<!-- # One Page Display Mode. 0 - No, 1 - Yes. -->
<!-- # Number: 0, 1. Default is 0 -->
<!-- # Mandatory -->
<P8357>0</P8357>

<!-- # Sync Backlight with LCD. 0 - No, 1 - Yes. Default is 0 -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<P8400>0</P8400>

<!-- ###################################################################################### -->
<!-- # EXT 1 to 160-->
<!-- ###################################################################################### -->
<!-- # Key Mode. -->
<!-- # Number: -1 -- 20 -->
<!-- # -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher -->
<!-- # 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - Dial DTMF -->
<!-- # 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom -->
<!-- # 11 - LDAP Search, 12 - Conference, 13 - Multicast Paging, 14 - Record, 15 - Call Log -->
<!-- # 16 - Monitored Call Park, 17 - Menu 18- XML Application,19 - Information, 20 - Message -->
<!-- # Mandatory -->
<!-- <P23000>-1</P23000> -->

<!-- # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 -->
<!-- # Number: 0 - 5 -->
<!-- <P23001>0</P23001> -->

<!-- # Description -->
<!-- # String -->
<!-- <P23002></P23002> -->

<!-- # Value -->
<!-- # String -->
<!-- <P23003></P23003> -->

{if $template == "grandstream/gxp2140"||$template == "grandstream/gxp2170"}

{assign var=key_types value=["none"=>-1,"speed dial"=>0, "blf"=>1, "presence watcher"=>2, "eventlist blf"=>3,"speed dial active"=>4,"dial dtmf"=>5,"voicemail"=>6,"call return"=>7,"transfer"=>8,"call park"=>9,"intercom"=>10,"ldap search"=>11,"multicast paging"=>13,"record"=>14,"call log"=>15,"monitored call park"=>16,"menu"=>17]}
{$start_id=23000}
{for $exp=1 to 160}
{$pid=$exp*5-5}
{if isset($keys.expansion.$exp.device_key_category) && isset($keys.expansion.$exp.device_key_type) && $keys.expansion.$exp.device_key_type|in_array:$key_types}
<P{$start_id+$pid}>{$key_types[$keys.expansion.$exp.device_key_type]}</P{$start_id+$pid}>
<P{$start_id+$pid+1}>{$keys.expansion.$exp.device_key_line}</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}>{$keys.expansion.$exp.device_key_label}</P{$start_id+$pid+2}>
<P{$start_id+$pid+3}>{$keys.expansion.$exp.device_key_value}</P{$start_id+$pid+3}>
{else}
<P{$start_id+$pid}>-1</P{$start_id+$pid}>
<P{$start_id+$pid+1}>0</P{$start_id+$pid+1}>
<P{$start_id+$pid+2}></P{$start_id+$pid+2}>
<P{$start_id+$pid+3}></P{$start_id+$pid+3}>
{/if}

{/for}
{/if}


</config>
</gs_provision>