mirror of
https://github.com/fusionpbx/fusionpbx.git
synced 2025-12-30 00:53:50 +00:00
b265a5b55f
Update the Yealink t46g to account for the changes to the provision class. These changes will have to be done on all templates.
3074 lines
132 KiB
INI
3074 lines
132 KiB
INI
#!version:1.0.0.1
|
|
|
|
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
|
|
|
|
#######################################################################################
|
|
## Account 1 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_1) }
|
|
account.1.enable = 1
|
|
{else}
|
|
account.1.enable = 0
|
|
{/if}
|
|
account.1.label = {$display_name_1}
|
|
account.1.display_name = {$display_name_1}
|
|
account.1.auth_name = {$auth_id_1}
|
|
account.1.password = {$user_password_1}
|
|
account.1.user_name = {$user_id_1}
|
|
account.1.sip_server_host = {$server_address_1}
|
|
account.1.sip_server_port = {$sip_port_1}
|
|
account.1.outbound_host = {$outbound_proxy_1}
|
|
account.1.outbound_port = 5060
|
|
account.1.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if}
|
|
{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if}
|
|
{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if}
|
|
{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if}
|
|
|
|
account.1.outbound_proxy.1.address = {$outbound_proxy_primary_1}
|
|
account.1.outbound_proxy.2.address = {$outbound_proxy_secondary_1}
|
|
account.1.outbound_proxy_enable = {if isset($outbound_proxy_primary_1)}1{else}0{/if}
|
|
|
|
{if isset($outbound_proxy_1_port)}
|
|
account.1.outbound_proxy.1.port = {$outbound_proxy_1_port}
|
|
{else}
|
|
account.1.outbound_proxy.1.port = 5060
|
|
{/if}
|
|
{if isset($outbound_proxy_1_port)}
|
|
account.1.outbound_proxy.2.port = {$outbound_proxy_2_port}
|
|
{else}
|
|
account.1.outbound_proxy.2.port = 5060
|
|
{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.1.reregister_enable = 0
|
|
account.1.retry_counts =
|
|
account.1.failback_mode = 0
|
|
account.1.failback_timeout = 3600
|
|
account.1.naptr_build = 0
|
|
account.1.fallback.redundancy_type = 0
|
|
account.1.fallback.timeout = 120
|
|
account.1.sip_server.1.address =
|
|
{if $sip_transport_1 == 'dns srv'}
|
|
account.1.sip_server.1.port = 0
|
|
{else}
|
|
account.1.sip_server.1.port = {$sip_port_1}
|
|
{/if}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.1.sip_server.1.expires = {$register_expires_1}
|
|
account.1.sip_server.1.retry_counts = 3
|
|
account.1.sip_server.1.failback_mode = 0
|
|
account.1.sip_server.1.failback_timeout = 3600
|
|
account.1.sip_server.1.register_on_enable = 0
|
|
account.1.sip_server.2.address =
|
|
account.1.sip_server.2.port = 5060
|
|
account.1.sip_server.2.expires = 3600
|
|
account.1.sip_server.2.retry_counts = 3
|
|
account.1.sip_server.2.failback_mode = 0
|
|
account.1.sip_server.2.failback_timeout = 3600
|
|
account.1.sip_server.2.register_on_enable = 0
|
|
account.1.dns_cache_type = 1
|
|
|
|
account.1.dns_cache_a.1.name =
|
|
account.1.dns_cache_a.1.ip =
|
|
account.1.dns_cache_a.1.ttl = 300
|
|
|
|
account.1.dns_cache_srv.1.name =
|
|
account.1.dns_cache_srv.1.port = 0
|
|
account.1.dns_cache_srv.1.priority = 0
|
|
account.1.dns_cache_srv.1.target =
|
|
account.1.dns_cache_srv.1.weight = 0
|
|
account.1.dns_cache_srv.1.ttl = 300
|
|
account.1.dns_cache_naptr.1.name =
|
|
account.1.dns_cache_naptr.1.flags =
|
|
account.1.dns_cache_naptr.1.order = 0
|
|
account.1.dns_cache_naptr.1.preference = 0
|
|
account.1.dns_cache_naptr.1.replace =
|
|
account.1.dns_cache_naptr.1.service =
|
|
account.1.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.1.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.1.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.1.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.1.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.1.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.1.srv_ttl_timer_enable =
|
|
account.1.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.1.register_mac =
|
|
account.1.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.1.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.1.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.1.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.1.nat.udp_update_enable = 3
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.1.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.1.nat.rport = {$yealink_rport_1}
|
|
|
|
|
|
#######################################################################################
|
|
## AccountX Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.1.advanced.timer_t1 =
|
|
account.1.advanced.timer_t2 =
|
|
account.1.advanced.timer_t4 =
|
|
|
|
voice_mail.number.1 = {$voicemail_number}
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.1.subscribe_mwi = 1
|
|
account.1.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.1.subscribe_mwi_to_vm = 1
|
|
|
|
account.1.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.1.blf.blf_list_uri =
|
|
|
|
account.1.blf_list_code =
|
|
account.1.blf_list_barge_in_code =
|
|
account.1.blf.subscribe_period = 1800
|
|
|
|
account.1.blf.subscribe_event =
|
|
account.1.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.1.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.1.bla_number =
|
|
account.1.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.1.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.1.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.1.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.1.codec.Y.rtpmap =
|
|
|
|
account.1.codec.1.enable = 1
|
|
account.1.codec.1.payload_type = PCMU
|
|
account.1.codec.1.priority = 1
|
|
account.1.codec.1.rtpmap = 0
|
|
|
|
account.1.codec.2.enable = 1
|
|
account.1.codec.2.payload_type = PCMA
|
|
account.1.codec.2.priority = 2
|
|
account.1.codec.2.rtpmap = 8
|
|
|
|
account.1.codec.3.enable = 0
|
|
account.1.codec.3.payload_type = G723_53
|
|
account.1.codec.3.priority =0
|
|
account.1.codec.3.rtpmap = 4
|
|
|
|
account.1.codec.4.enable = 0
|
|
account.1.codec.4.payload_type = G723_63
|
|
account.1.codec.4.priority = 0
|
|
account.1.codec.4.rtpmap = 4
|
|
|
|
account.1.codec.5.enable = 1
|
|
account.1.codec.5.payload_type = G729
|
|
account.1.codec.5.priority = 3
|
|
account.1.codec.5.rtpmap = 18
|
|
|
|
account.1.codec.6.enable = 1
|
|
account.1.codec.6.payload_type = G722
|
|
account.1.codec.6.priority = 4
|
|
account.1.codec.6.rtpmap = 9
|
|
|
|
account.1.codec.7.enable = 0
|
|
account.1.codec.7.payload_type = iLBC
|
|
account.1.codec.7.priority = 0
|
|
account.1.codec.7.rtpmap = 106
|
|
|
|
account.1.codec.8.enable = 0
|
|
account.1.codec.8.payload_type = G726-16
|
|
account.1.codec.8.priority = 0
|
|
account.1.codec.8.rtpmap = 103
|
|
|
|
account.1.codec.9.enable = 0
|
|
account.1.codec.9.payload_type = G726-24
|
|
account.1.codec.9.priority = 0
|
|
account.1.codec.9.rtpmap = 104
|
|
|
|
account.1.codec.10.enable = 0
|
|
account.1.codec.10.payload_type = G726-32
|
|
account.1.codec.10.priority = 0
|
|
account.1.codec.10.rtpmap = 102
|
|
|
|
account.1.codec.11.enable = 0
|
|
account.1.codec.11.payload_type = G726-40
|
|
account.1.codec.11.priority = 0
|
|
account.1.codec.11.rtpmap = 105
|
|
|
|
account.1.codec.12.enable = 0
|
|
account.1.codec.12.payload_type = GSM
|
|
account.1.codec.12.priority = 0
|
|
account.1.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.1.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.1.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.1.anonymous_call = 0
|
|
account.1.anonymous_call_oncode =
|
|
account.1.anonymous_call_offcode =
|
|
|
|
account.1.reject_anonymous_call =
|
|
account.1.anonymous_reject_oncode =
|
|
account.1.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.1.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.1.group_pickup_code =
|
|
account.1.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.1.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.1.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.1.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.1.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account1. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.1.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.1.ringtone.ring_type = Resource:Ring2.wav
|
|
account.1.ringtone.ring_type =
|
|
|
|
account.1.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.1.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.1.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid_source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.1.cid_source =
|
|
|
|
account.1.cid_source_privacy = 1
|
|
account.1.cid_source_ppi = 1
|
|
account.1.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.1.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.1.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.1.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.1.music_on_hold_type =
|
|
|
|
account.1.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.1.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.1.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.1.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.1.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.1.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.1.dnd.enable =
|
|
account.1.dnd.on_code =
|
|
account.1.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
|
|
account.1.always_fwd.enable =
|
|
account.1.always_fwd.target =
|
|
account.1.always_fwd.off_code =
|
|
account.1.always_fwd.on_code =
|
|
|
|
account.1.busy_fwd.enable =
|
|
account.1.busy_fwd.target =
|
|
account.1.busy_fwd.off_code =
|
|
account.1.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.1.timeout_fwd.enable =
|
|
account.1.timeout_fwd.target =
|
|
account.1.timeout_fwd.timeout =
|
|
account.1.timeout_fwd.off_code =
|
|
account.1.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.1.hoteling.enable = 0
|
|
account.1.hoteling.user_id = 0
|
|
account.1.hoteling.password = 0
|
|
account.1.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.1.acd.enable = 0
|
|
account.1.acd.unavailable_reason_enable = 0
|
|
account.1.acd.available = 0
|
|
account.1.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.1.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.1.bw_acd_reason_code.1 =
|
|
|
|
account.1.reason_code.1 =
|
|
account.1.reason_code_name.1 = 0
|
|
account.1.bw_disp_code.1 =
|
|
account.1.bw_disp_code_name.1 =
|
|
account.1.supervisor_info_code.1 =
|
|
account.1.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.1.call_center.call_info_enable = 0
|
|
account.1.call_center.show_call_info_time = 30
|
|
account.1.call_center.disp_code_enable = 0
|
|
account.1.call_center.trace_enable = 0
|
|
account.1.call_center.emergency_enable = 0
|
|
account.1.call_center.queue_status_enable = 0
|
|
account.1.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.1.xsi.user =
|
|
account.1.xsi.password =
|
|
account.1.xsi.host =
|
|
account.1.xsi.server_type =
|
|
account.1.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## Account 2 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_2) }
|
|
account.2.enable = 1
|
|
{else}
|
|
account.2.enable = 0
|
|
{/if}
|
|
account.2.label = {$display_name_2}
|
|
account.2.display_name = {$display_name_2}
|
|
account.2.auth_name = {$auth_id_2}
|
|
account.2.password = {$user_password_2}
|
|
account.2.user_name = {$user_id_2}
|
|
account.2.sip_server_host = {$server_address_2}
|
|
account.2.sip_server_port = {$sip_port_2}
|
|
account.2.outbound_host = {$outbound_proxy_2}
|
|
account.2.outbound_port = 5060
|
|
account.2.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if}
|
|
{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if}
|
|
{if $sip_transport_2 == 'tls'}account.2.transport = 2{/if}
|
|
{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if}
|
|
|
|
account.2.outbound_proxy.1.address = {$outbound_proxy_primary_2}
|
|
account.2.outbound_proxy.2.address = {$outbound_proxy_secondary_2}
|
|
account.2.outbound_proxy_enable = {if isset($outbound_proxy_primary_2)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.2.reregister_enable = 0
|
|
account.2.retry_counts =
|
|
account.2.failback_mode = 0
|
|
account.2.failback_timeout = 3600
|
|
account.2.naptr_build = 0
|
|
account.2.fallback.redundancy_type = 0
|
|
account.2.fallback.timeout = 120
|
|
account.2.sip_server.1.address =
|
|
account.2.sip_server.1.port = 5060
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.2.sip_server.1.expires = {$register_expires_2}
|
|
account.2.sip_server.1.retry_counts = 3
|
|
account.2.sip_server.1.failback_mode = 0
|
|
account.2.sip_server.1.failback_timeout = 3600
|
|
account.2.sip_server.1.register_on_enable = 0
|
|
account.2.sip_server.2.address =
|
|
account.2.sip_server.2.port = 5060
|
|
account.2.sip_server.2.expires = 3600
|
|
account.2.sip_server.2.retry_counts = 3
|
|
account.2.sip_server.2.failback_mode = 0
|
|
account.2.sip_server.2.failback_timeout = 3600
|
|
account.2.sip_server.2.register_on_enable = 0
|
|
account.2.dns_cache_type = 1
|
|
|
|
account.2.dns_cache_a.1.name =
|
|
account.2.dns_cache_a.1.ip =
|
|
account.2.dns_cache_a.1.ttl = 300
|
|
|
|
account.2.dns_cache_srv.0.name =
|
|
account.2.dns_cache_srv.0.port = 0
|
|
account.2.dns_cache_srv.0.priority = 0
|
|
account.2.dns_cache_srv.0.target =
|
|
account.2.dns_cache_srv.0.weight = 0
|
|
account.2.dns_cache_srv.0.ttl = 300
|
|
account.2.dns_cache_naptr.0.name =
|
|
account.2.dns_cache_naptr.0.flags =
|
|
account.2.dns_cache_naptr.0.order = 0
|
|
account.2.dns_cache_naptr.0.preference = 0
|
|
account.2.dns_cache_naptr.0.replace =
|
|
account.2.dns_cache_naptr.0.service =
|
|
account.2.dns_cache_naptr.0.ttl = 300
|
|
|
|
account.2.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.2.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.2.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.2.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.2.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.2.srv_ttl_timer_enable =
|
|
account.2.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.2.register_mac =
|
|
account.2.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.2.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.2.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.2.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.2.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.2.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.2.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.2.nat.rport = {$yealink_rport_2}
|
|
|
|
|
|
#######################################################################################
|
|
## Account2 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.2.advanced.timer_t1 = 0.5
|
|
account.2.advanced.timer_t2 = 4
|
|
account.2.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.2 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.2.subscribe_mwi = 1
|
|
account.2.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.2.subscribe_mwi_to_vm = 1
|
|
|
|
account.2.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.2.blf.blf_list_uri =
|
|
|
|
account.2.blf_list_code =
|
|
account.2.blf_list_barge_in_code =
|
|
account.2.blf.subscribe_period = 1800
|
|
|
|
account.2.blf.subscribe_event =
|
|
account.2.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.2.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.2.bla_number =
|
|
account.2.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.2.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.2.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.2.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.2.codec.Y.rtpmap =
|
|
|
|
account.2.codec.1.enable = 1
|
|
account.2.codec.1.payload_type = PCMU
|
|
account.2.codec.1.priority = 1
|
|
account.2.codec.1.rtpmap = 0
|
|
|
|
account.2.codec.2.enable = 1
|
|
account.2.codec.2.payload_type = PCMA
|
|
account.2.codec.2.priority = 2
|
|
account.2.codec.2.rtpmap = 8
|
|
|
|
account.2.codec.3.enable = 0
|
|
account.2.codec.3.payload_type = G723_53
|
|
account.2.codec.3.priority =0
|
|
account.2.codec.3.rtpmap = 4
|
|
|
|
account.2.codec.4.enable = 0
|
|
account.2.codec.4.payload_type = G723_63
|
|
account.2.codec.4.priority = 0
|
|
account.2.codec.4.rtpmap = 4
|
|
|
|
account.2.codec.5.enable = 1
|
|
account.2.codec.5.payload_type = G729
|
|
account.2.codec.5.priority = 3
|
|
account.2.codec.5.rtpmap = 18
|
|
|
|
account.2.codec.6.enable = 1
|
|
account.2.codec.6.payload_type = G722
|
|
account.2.codec.6.priority = 4
|
|
account.2.codec.6.rtpmap = 9
|
|
|
|
account.2.codec.7.enable = 0
|
|
account.2.codec.7.payload_type = iLBC
|
|
account.2.codec.7.priority = 0
|
|
account.2.codec.7.rtpmap = 106
|
|
|
|
account.2.codec.8.enable = 0
|
|
account.2.codec.8.payload_type = G726-16
|
|
account.2.codec.8.priority = 0
|
|
account.2.codec.8.rtpmap = 103
|
|
|
|
account.2.codec.9.enable = 0
|
|
account.2.codec.9.payload_type = G726-24
|
|
account.2.codec.9.priority = 0
|
|
account.2.codec.9.rtpmap = 104
|
|
|
|
account.2.codec.10.enable = 0
|
|
account.2.codec.10.payload_type = G726-32
|
|
account.2.codec.10.priority = 0
|
|
account.2.codec.10.rtpmap = 102
|
|
|
|
account.2.codec.11.enable = 0
|
|
account.2.codec.11.payload_type = G726-40
|
|
account.2.codec.11.priority = 0
|
|
account.2.codec.11.rtpmap = 105
|
|
|
|
account.2.codec.12.enable = 0
|
|
account.2.codec.12.payload_type = GSM
|
|
account.2.codec.12.priority = 0
|
|
account.2.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.2.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.2.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.2.anonymous_call = 0
|
|
account.2.anonymous_call_oncode =
|
|
account.2.anonymous_call_offcode =
|
|
|
|
account.2.reject_anonymous_call =
|
|
account.2.anonymous_reject_oncode =
|
|
account.2.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.2.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.2.group_pickup_code =
|
|
account.2.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.2.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.2.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.2.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.2.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.2.ringtone.ring_type =
|
|
|
|
account.2.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.2.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.2.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.2.cid_source =
|
|
|
|
account.2.cid_source_privacy = 1
|
|
account.2.cid_source_ppi = 1
|
|
account.2.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.2.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.2.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.2.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.2.music_on_hold_type =
|
|
|
|
account.2.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.2.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.2.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.2.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.2.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.2.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.2.dnd.enable =
|
|
account.2.dnd.on_code =
|
|
account.2.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.2.always_fwd.enable =
|
|
account.2.always_fwd.target =
|
|
account.2.always_fwd.off_code =
|
|
account.2.always_fwd.on_code =
|
|
|
|
account.2.busy_fwd.enable =
|
|
account.2.busy_fwd.target =
|
|
account.2.busy_fwd.off_code =
|
|
account.2.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.2.timeout_fwd.enable =
|
|
account.2.timeout_fwd.target =
|
|
account.2.timeout_fwd.timeout =
|
|
account.2.timeout_fwd.off_code =
|
|
account.2.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.2.hoteling.enable = 0
|
|
account.2.hoteling.user_id = 0
|
|
account.2.hoteling.password = 0
|
|
account.2.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.2.acd.enable = 0
|
|
account.2.acd.unavailable_reason_enable = 0
|
|
account.2.acd.available = 0
|
|
account.2.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.2.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.2.bw_acd_reason_code.1 =
|
|
|
|
account.2.reason_code.1 =
|
|
account.2.reason_code_name.1 = 0
|
|
account.2.bw_disp_code.1 =
|
|
account.2.bw_disp_code_name.1 =
|
|
account.2.supervisor_info_code.1 =
|
|
account.2.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.2.call_center.call_info_enable = 0
|
|
account.2.call_center.show_call_info_time = 30
|
|
account.2.call_center.disp_code_enable = 0
|
|
account.2.call_center.trace_enable = 0
|
|
account.2.call_center.emergency_enable = 0
|
|
account.2.call_center.queue_status_enable = 0
|
|
account.2.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.2.xsi.user =
|
|
account.2.xsi.password =
|
|
account.2.xsi.host =
|
|
account.2.xsi.server_type =
|
|
account.2.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## Time ##
|
|
#######################################################################################
|
|
#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
|
|
#local_time.time_zone = +8
|
|
#local_time.time_zone_name = China(Beijing)
|
|
local_time.time_zone = {$yealink_time_zone}
|
|
local_time.time_zone_name = {$yealink_time_zone_name}
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
##0-ipv4, 1-ipv6, 2-ipv4&ipv6
|
|
network.ip_address_mode = 2
|
|
|
|
network.ipv6_prefix = 64
|
|
network.ipv6_internet_port.type =
|
|
network.ipv6_internet_port.ip =
|
|
network.ipv6_internet_port.gateway =
|
|
network.ipv6_primary_dns =
|
|
network.ipv6_secondary_dns =
|
|
network.ipv6_icmp_v6.enable =
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server;
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}
|
|
{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}
|
|
{if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}
|
|
|
|
#######################################################################################
|
|
## Account 3 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_3) }
|
|
account.3.enable = 1
|
|
{else}
|
|
account.3.enable = 0
|
|
{/if}
|
|
account.3.label = {$display_name_3}
|
|
account.3.display_name = {$display_name_3}
|
|
account.3.auth_name = {$auth_id_3}
|
|
account.3.password = {$user_password_3}
|
|
account.3.user_name = {$user_id_3}
|
|
account.3.sip_server_host = {$server_address_3}
|
|
account.3.sip_server_port = {$sip_port_3}
|
|
account.3.outbound_host = {$outbound_proxy_3}
|
|
account.3.outbound_port = 5060
|
|
account.3.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if}
|
|
{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if}
|
|
{if $sip_transport_3 == 'tls'}account.3.transport = 2{/if}
|
|
{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if}
|
|
|
|
account.3.outbound_proxy.1.address = {$outbound_proxy_primary_3}
|
|
account.3.outbound_proxy.2.address = {$outbound_proxy_secondary_3}
|
|
account.3.outbound_proxy_enable = {if isset($outbound_proxy_primary_3)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.3.reregister_enable = 0
|
|
account.3.retry_counts =
|
|
account.3.failback_mode = 0
|
|
account.3.failback_timeout = 3600
|
|
account.3.naptr_build = 0
|
|
account.3.fallback.redundancy_type = 0
|
|
account.3.fallback.timeout = 120
|
|
account.3.sip_server.1.address =
|
|
account.3.sip_server.1.port = 5060
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.3.sip_server.1.expires = {$register_expires_3}
|
|
account.3.sip_server.1.retry_counts = 3
|
|
account.3.sip_server.1.failback_mode = 0
|
|
account.3.sip_server.1.failback_timeout = 3600
|
|
account.3.sip_server.1.register_on_enable = 0
|
|
account.3.sip_server.2.address =
|
|
account.3.sip_server.2.port = 5060
|
|
account.3.sip_server.2.expires = 3600
|
|
account.3.sip_server.2.retry_counts = 3
|
|
account.3.sip_server.2.failback_mode = 0
|
|
account.3.sip_server.2.failback_timeout = 3600
|
|
account.3.sip_server.2.register_on_enable = 0
|
|
account.3.dns_cache_type = 1
|
|
|
|
account.3.dns_cache_a.1.name =
|
|
account.3.dns_cache_a.1.ip =
|
|
account.3.dns_cache_a.1.ttl = 300
|
|
|
|
account.3.dns_cache_srv.0.name =
|
|
account.3.dns_cache_srv.0.port = 0
|
|
account.3.dns_cache_srv.0.priority = 0
|
|
account.3.dns_cache_srv.0.target =
|
|
account.3.dns_cache_srv.0.weight = 0
|
|
account.3.dns_cache_srv.0.ttl = 300
|
|
account.3.dns_cache_naptr.0.name =
|
|
account.3.dns_cache_naptr.0.flags =
|
|
account.3.dns_cache_naptr.0.order = 0
|
|
account.3.dns_cache_naptr.0.preference = 0
|
|
account.3.dns_cache_naptr.0.replace =
|
|
account.3.dns_cache_naptr.0.service =
|
|
account.3.dns_cache_naptr.0.ttl = 300
|
|
|
|
account.3.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.3.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.3.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.3.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.3.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.3.srv_ttl_timer_enable =
|
|
account.3.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.3.register_mac =
|
|
account.3.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.3.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.3.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.3.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.3.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.3.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.3.nat.rport = {$yealink_rport_3}
|
|
|
|
|
|
#######################################################################################
|
|
## Account3 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.3.advanced.timer_t1 = 0.5
|
|
account.3.advanced.timer_t2 = 4
|
|
account.3.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.3 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.3.subscribe_mwi = 1
|
|
account.3.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.3.subscribe_mwi_to_vm = 1
|
|
|
|
account.3.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.3.blf.blf_list_uri =
|
|
|
|
account.3.blf_list_code =
|
|
account.3.blf_list_barge_in_code =
|
|
account.3.blf.subscribe_period = 1800
|
|
|
|
account.3.blf.subscribe_event =
|
|
account.3.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.3.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.3.bla_number =
|
|
account.3.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.3.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.3.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.3.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.3.codec.Y.rtpmap =
|
|
|
|
account.3.codec.1.enable = 1
|
|
account.3.codec.1.payload_type = PCMU
|
|
account.3.codec.1.priority = 1
|
|
account.3.codec.1.rtpmap = 0
|
|
|
|
account.3.codec.2.enable = 1
|
|
account.3.codec.2.payload_type = PCMA
|
|
account.3.codec.2.priority = 2
|
|
account.3.codec.2.rtpmap = 8
|
|
|
|
account.3.codec.3.enable = 0
|
|
account.3.codec.3.payload_type = G723_53
|
|
account.3.codec.3.priority =0
|
|
account.3.codec.3.rtpmap = 4
|
|
|
|
account.3.codec.4.enable = 0
|
|
account.3.codec.4.payload_type = G723_63
|
|
account.3.codec.4.priority = 0
|
|
account.3.codec.4.rtpmap = 4
|
|
|
|
account.3.codec.5.enable = 1
|
|
account.3.codec.5.payload_type = G729
|
|
account.3.codec.5.priority = 3
|
|
account.3.codec.5.rtpmap = 18
|
|
|
|
account.3.codec.6.enable = 1
|
|
account.3.codec.6.payload_type = G722
|
|
account.3.codec.6.priority = 4
|
|
account.3.codec.6.rtpmap = 9
|
|
|
|
account.3.codec.7.enable = 0
|
|
account.3.codec.7.payload_type = iLBC
|
|
account.3.codec.7.priority = 0
|
|
account.3.codec.7.rtpmap = 106
|
|
|
|
account.3.codec.8.enable = 0
|
|
account.3.codec.8.payload_type = G726-16
|
|
account.3.codec.8.priority = 0
|
|
account.3.codec.8.rtpmap = 103
|
|
|
|
account.3.codec.9.enable = 0
|
|
account.3.codec.9.payload_type = G726-24
|
|
account.3.codec.9.priority = 0
|
|
account.3.codec.9.rtpmap = 104
|
|
|
|
account.3.codec.10.enable = 0
|
|
account.3.codec.10.payload_type = G726-32
|
|
account.3.codec.10.priority = 0
|
|
account.3.codec.10.rtpmap = 102
|
|
|
|
account.3.codec.11.enable = 0
|
|
account.3.codec.11.payload_type = G726-40
|
|
account.3.codec.11.priority = 0
|
|
account.3.codec.11.rtpmap = 105
|
|
|
|
account.3.codec.12.enable = 0
|
|
account.3.codec.12.payload_type = GSM
|
|
account.3.codec.12.priority = 0
|
|
account.3.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.3.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.3.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.3.anonymous_call = 0
|
|
account.3.anonymous_call_oncode =
|
|
account.3.anonymous_call_offcode =
|
|
|
|
account.3.reject_anonymous_call =
|
|
account.3.anonymous_reject_oncode =
|
|
account.3.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.3.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.3.group_pickup_code =
|
|
account.3.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.3.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.3.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.3.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.3.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.3.ringtone.ring_type =
|
|
|
|
account.3.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.3.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.3.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.3.cid_source =
|
|
|
|
account.3.cid_source_privacy = 1
|
|
account.3.cid_source_ppi = 1
|
|
account.3.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.3.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.3.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.3.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.3.music_on_hold_type =
|
|
|
|
account.3.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.3.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.3.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.3.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.3.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.3.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.3.dnd.enable =
|
|
account.3.dnd.on_code =
|
|
account.3.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.3.always_fwd.enable =
|
|
account.3.always_fwd.target =
|
|
account.3.always_fwd.off_code =
|
|
account.3.always_fwd.on_code =
|
|
|
|
account.3.busy_fwd.enable =
|
|
account.3.busy_fwd.target =
|
|
account.3.busy_fwd.off_code =
|
|
account.3.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.3.timeout_fwd.enable =
|
|
account.3.timeout_fwd.target =
|
|
account.3.timeout_fwd.timeout =
|
|
account.3.timeout_fwd.off_code =
|
|
account.3.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.3.hoteling.enable = 0
|
|
account.3.hoteling.user_id = 0
|
|
account.3.hoteling.password = 0
|
|
account.3.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.3.acd.enable = 0
|
|
account.3.acd.unavailable_reason_enable = 0
|
|
account.3.acd.available = 0
|
|
account.3.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.3.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.3.bw_acd_reason_code.1 =
|
|
|
|
account.3.reason_code.1 =
|
|
account.3.reason_code_name.1 = 0
|
|
account.3.bw_disp_code.1 =
|
|
account.3.bw_disp_code_name.1 =
|
|
account.3.supervisor_info_code.1 =
|
|
account.3.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.3.call_center.call_info_enable = 0
|
|
account.3.call_center.show_call_info_time = 30
|
|
account.3.call_center.disp_code_enable = 0
|
|
account.3.call_center.trace_enable = 0
|
|
account.3.call_center.emergency_enable = 0
|
|
account.3.call_center.queue_status_enable = 0
|
|
account.3.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.3.xsi.user =
|
|
account.3.xsi.password =
|
|
account.3.xsi.host =
|
|
account.3.xsi.server_type =
|
|
account.3.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
##0-ipv4, 1-ipv6, 2-ipv4&ipv6
|
|
network.ip_address_mode = 2
|
|
|
|
network.ipv6_prefix = 64
|
|
network.ipv6_internet_port.type =
|
|
network.ipv6_internet_port.ip =
|
|
network.ipv6_internet_port.gateway =
|
|
network.ipv6_primary_dns =
|
|
network.ipv6_secondary_dns =
|
|
network.ipv6_icmp_v6.enable =
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server;
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}
|
|
{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}
|
|
|
|
#######################################################################################
|
|
## Account 4 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_4) }
|
|
account.4.enable = 1
|
|
{else}
|
|
account.4.enable = 0
|
|
{/if}
|
|
account.4.label = {$display_name_4}
|
|
account.4.display_name = {$display_name_4}
|
|
account.4.auth_name = {$auth_id_4}
|
|
account.4.password = {$user_password_4}
|
|
account.4.user_name = {$user_id_4}
|
|
account.4.sip_server_host = {$server_address_4}
|
|
account.4.sip_server_port = {$sip_port_4}
|
|
account.4.outbound_host = {$outbound_proxy_4}
|
|
account.4.outbound_port = 5060
|
|
account.4.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_4 == 'udp'}account.4.transport = 0{/if}
|
|
{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if}
|
|
{if $sip_transport_4 == 'tls'}account.4.transport = 2{/if}
|
|
{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if}
|
|
|
|
account.4.outbound_proxy.1.address = {$outbound_proxy_primary_4}
|
|
account.4.outbound_proxy.2.address = {$outbound_proxy_secondary_4}
|
|
account.4.outbound_proxy_enable = {if isset($outbound_proxy_primary_4)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.4.reregister_enable = 0
|
|
account.4.retry_counts =
|
|
account.4.failback_mode = 0
|
|
account.4.failback_timeout = 3600
|
|
account.4.naptr_build = 0
|
|
account.4.fallback.redundancy_type = 0
|
|
account.4.fallback.timeout = 120
|
|
account.4.sip_server.1.address =
|
|
account.4.sip_server.1.port = 5060
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.4.sip_server.1.expires = {$register_expires_4}
|
|
account.4.sip_server.1.retry_counts = 3
|
|
account.4.sip_server.1.failback_mode = 0
|
|
account.4.sip_server.1.failback_timeout = 3600
|
|
account.4.sip_server.1.register_on_enable = 0
|
|
account.4.sip_server.2.address =
|
|
account.4.sip_server.2.port = 5060
|
|
account.4.sip_server.2.expires = 3600
|
|
account.4.sip_server.2.retry_counts = 3
|
|
account.4.sip_server.2.failback_mode = 0
|
|
account.4.sip_server.2.failback_timeout = 3600
|
|
account.4.sip_server.2.register_on_enable = 0
|
|
account.4.dns_cache_type = 1
|
|
|
|
account.4.dns_cache_a.1.name =
|
|
account.4.dns_cache_a.1.ip =
|
|
account.4.dns_cache_a.1.ttl = 300
|
|
|
|
account.4.dns_cache_srv.1.name =
|
|
account.4.dns_cache_srv.1.port = 0
|
|
account.4.dns_cache_srv.1.priority = 0
|
|
account.4.dns_cache_srv.1.target =
|
|
account.4.dns_cache_srv.1.weight = 0
|
|
account.4.dns_cache_srv.1.ttl = 300
|
|
account.4.dns_cache_naptr.1.name =
|
|
account.4.dns_cache_naptr.1.flags =
|
|
account.4.dns_cache_naptr.1.order = 0
|
|
account.4.dns_cache_naptr.1.preference = 0
|
|
account.4.dns_cache_naptr.1.replace =
|
|
account.4.dns_cache_naptr.1.service =
|
|
account.4.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.4.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.4.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.4.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.4.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.4.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.4.srv_ttl_timer_enable =
|
|
account.4.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.4.register_mac =
|
|
account.4.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.4.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.4.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.4.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.4.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.4.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.4.nat.rport = {$yealink_rport_4}
|
|
|
|
|
|
#######################################################################################
|
|
## Account4 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.4.advanced.timer_t1 = 0.5
|
|
account.4.advanced.timer_t2 = 4
|
|
account.4.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.4 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.4.subscribe_mwi = 1
|
|
account.4.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.4.subscribe_mwi_to_vm = 1
|
|
|
|
account.4.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.4.blf.blf_list_uri =
|
|
|
|
account.4.blf_list_code =
|
|
account.4.blf_list_barge_in_code =
|
|
account.4.blf.subscribe_period = 1800
|
|
|
|
account.4.blf.subscribe_event =
|
|
account.4.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.4.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.4.bla_number =
|
|
account.4.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.4.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.4.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.4.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.4.codec.Y.rtpmap =
|
|
|
|
account.4.codec.1.enable = 1
|
|
account.4.codec.1.payload_type = PCMU
|
|
account.4.codec.1.priority = 1
|
|
account.4.codec.1.rtpmap = 0
|
|
|
|
account.4.codec.2.enable = 1
|
|
account.4.codec.2.payload_type = PCMA
|
|
account.4.codec.2.priority = 2
|
|
account.4.codec.2.rtpmap = 8
|
|
|
|
account.4.codec.3.enable = 0
|
|
account.4.codec.3.payload_type = G723_53
|
|
account.4.codec.3.priority =0
|
|
account.4.codec.3.rtpmap = 4
|
|
|
|
account.4.codec.4.enable = 0
|
|
account.4.codec.4.payload_type = G723_63
|
|
account.4.codec.4.priority = 0
|
|
account.4.codec.4.rtpmap = 4
|
|
|
|
account.4.codec.5.enable = 1
|
|
account.4.codec.5.payload_type = G729
|
|
account.4.codec.5.priority = 3
|
|
account.4.codec.5.rtpmap = 18
|
|
|
|
account.4.codec.6.enable = 1
|
|
account.4.codec.6.payload_type = G722
|
|
account.4.codec.6.priority = 4
|
|
account.4.codec.6.rtpmap = 9
|
|
|
|
account.4.codec.7.enable = 0
|
|
account.4.codec.7.payload_type = iLBC
|
|
account.4.codec.7.priority = 0
|
|
account.4.codec.7.rtpmap = 106
|
|
|
|
account.4.codec.8.enable = 0
|
|
account.4.codec.8.payload_type = G726-16
|
|
account.4.codec.8.priority = 0
|
|
account.4.codec.8.rtpmap = 103
|
|
|
|
account.4.codec.9.enable = 0
|
|
account.4.codec.9.payload_type = G726-24
|
|
account.4.codec.9.priority = 0
|
|
account.4.codec.9.rtpmap = 104
|
|
|
|
account.4.codec.10.enable = 0
|
|
account.4.codec.10.payload_type = G726-32
|
|
account.4.codec.10.priority = 0
|
|
account.4.codec.10.rtpmap = 102
|
|
|
|
account.4.codec.11.enable = 0
|
|
account.4.codec.11.payload_type = G726-40
|
|
account.4.codec.11.priority = 0
|
|
account.4.codec.11.rtpmap = 105
|
|
|
|
account.4.codec.12.enable = 0
|
|
account.4.codec.12.payload_type = GSM
|
|
account.4.codec.12.priority = 0
|
|
account.4.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.4.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.4.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.4.anonymous_call = 0
|
|
account.4.anonymous_call_oncode =
|
|
account.4.anonymous_call_offcode =
|
|
|
|
account.4.reject_anonymous_call =
|
|
account.4.anonymous_reject_oncode =
|
|
account.4.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.4.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.4.group_pickup_code =
|
|
account.4.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.4.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.4.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.4.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.4.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.4.ringtone.ring_type =
|
|
|
|
account.4.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.4.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.4.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.4.cid_source =
|
|
|
|
account.4.cid_source_privacy = 1
|
|
account.4.cid_source_ppi = 1
|
|
account.4.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.4.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.4.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.4.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.4.music_on_hold_type =
|
|
|
|
account.4.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.4.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.4.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.4.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.4.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.4.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.4.dnd.enable =
|
|
account.4.dnd.on_code =
|
|
account.4.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.4.always_fwd.enable =
|
|
account.4.always_fwd.target =
|
|
account.4.always_fwd.off_code =
|
|
account.4.always_fwd.on_code =
|
|
|
|
account.4.busy_fwd.enable =
|
|
account.4.busy_fwd.target =
|
|
account.4.busy_fwd.off_code =
|
|
account.4.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.4.timeout_fwd.enable =
|
|
account.4.timeout_fwd.target =
|
|
account.4.timeout_fwd.timeout =
|
|
account.4.timeout_fwd.off_code =
|
|
account.4.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.4.hoteling.enable = 0
|
|
account.4.hoteling.user_id = 0
|
|
account.4.hoteling.password = 0
|
|
account.4.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.4.acd.enable = 0
|
|
account.4.acd.unavailable_reason_enable = 0
|
|
account.4.acd.available = 0
|
|
account.4.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.4.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.4.bw_acd_reason_code.1 =
|
|
|
|
account.4.reason_code.1 =
|
|
account.4.reason_code_name.1 = 0
|
|
account.4.bw_disp_code.1 =
|
|
account.4.bw_disp_code_name.1 =
|
|
account.4.supervisor_info_code.1 =
|
|
account.4.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.4.call_center.call_info_enable = 0
|
|
account.4.call_center.show_call_info_time = 30
|
|
account.4.call_center.disp_code_enable = 0
|
|
account.4.call_center.trace_enable = 0
|
|
account.4.call_center.emergency_enable = 0
|
|
account.4.call_center.queue_status_enable = 0
|
|
account.4.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.4.xsi.user =
|
|
account.4.xsi.password =
|
|
account.4.xsi.host =
|
|
account.4.xsi.server_type =
|
|
account.4.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
##0-ipv4, 1-ipv6, 2-ipv4&ipv6
|
|
network.ip_address_mode = 2
|
|
|
|
network.ipv6_prefix = 64
|
|
network.ipv6_internet_port.type =
|
|
network.ipv6_internet_port.ip =
|
|
network.ipv6_internet_port.gateway =
|
|
network.ipv6_primary_dns =
|
|
network.ipv6_secondary_dns =
|
|
network.ipv6_icmp_v6.enable =
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server;
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}
|
|
{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}
|
|
|
|
#######################################################################################
|
|
## Account 5 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_5) }
|
|
account.5.enable = 1
|
|
{else}
|
|
account.5.enable = 0
|
|
{/if}
|
|
account.5.label = {$display_name_5}
|
|
account.5.display_name = {$display_name_5}
|
|
account.5.auth_name = {$auth_id_5}
|
|
account.5.password = {$user_password_5}
|
|
account.5.user_name = {$user_id_5}
|
|
account.5.sip_server_host = {$server_address_5}
|
|
account.5.sip_server_port = {$sip_port_5}
|
|
account.5.outbound_host = {$outbound_proxy_5}
|
|
account.5.outbound_port = 5060
|
|
account.5.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if}
|
|
{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if}
|
|
{if $sip_transport_5 == 'tls'}account.5.transport = 2{/if}
|
|
{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if}
|
|
|
|
account.5.outbound_proxy.1.address = {$outbound_proxy_primary_5}
|
|
account.5.outbound_proxy.2.address = {$outbound_proxy_secondary_5}
|
|
account.5.outbound_proxy_enable = {if isset($outbound_proxy_primary_5)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.5.reregister_enable = 0
|
|
account.5.retry_counts =
|
|
account.5.failback_mode = 0
|
|
account.5.failback_timeout = 3600
|
|
account.5.naptr_build = 0
|
|
account.5.fallback.redundancy_type = 0
|
|
account.5.fallback.timeout = 120
|
|
account.5.sip_server.1.address =
|
|
account.5.sip_server.1.port = 5060
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.5.sip_server.1.expires = {$register_expires_5}
|
|
account.5.sip_server.1.retry_counts = 3
|
|
account.5.sip_server.1.failback_mode = 0
|
|
account.5.sip_server.1.failback_timeout = 3600
|
|
account.5.sip_server.1.register_on_enable = 0
|
|
account.5.sip_server.2.address =
|
|
account.5.sip_server.2.port = 5060
|
|
account.5.sip_server.2.expires = 3600
|
|
account.5.sip_server.2.retry_counts = 3
|
|
account.5.sip_server.2.failback_mode = 0
|
|
account.5.sip_server.2.failback_timeout = 3600
|
|
account.5.sip_server.2.register_on_enable = 0
|
|
account.5.dns_cache_type = 1
|
|
|
|
account.5.dns_cache_a.1.name =
|
|
account.5.dns_cache_a.1.ip =
|
|
account.5.dns_cache_a.1.ttl = 300
|
|
|
|
account.5.dns_cache_srv.1.name =
|
|
account.5.dns_cache_srv.1.port = 0
|
|
account.5.dns_cache_srv.1.priority = 0
|
|
account.5.dns_cache_srv.1.target =
|
|
account.5.dns_cache_srv.1.weight = 0
|
|
account.5.dns_cache_srv.1.ttl = 300
|
|
account.5.dns_cache_naptr.1.name =
|
|
account.5.dns_cache_naptr.1.flags =
|
|
account.5.dns_cache_naptr.1.order = 0
|
|
account.5.dns_cache_naptr.1.preference = 0
|
|
account.5.dns_cache_naptr.1.replace =
|
|
account.5.dns_cache_naptr.1.service =
|
|
account.5.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.5.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.5.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.5.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.5.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.5.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.5.srv_ttl_timer_enable =
|
|
account.5.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.5.register_mac =
|
|
account.5.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.5.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.5.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.5.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.5.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.5.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.5.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.5.nat.rport = {$yealink_rport_5}
|
|
|
|
|
|
#######################################################################################
|
|
## Account5 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.5.advanced.timer_t1 = 0.5
|
|
account.5.advanced.timer_t2 = 4
|
|
account.5.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.5 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.5.subscribe_mwi = 1
|
|
account.5.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.5.subscribe_mwi_to_vm = 1
|
|
|
|
account.5.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.5.blf.blf_list_uri =
|
|
|
|
account.5.blf_list_code =
|
|
account.5.blf_list_barge_in_code =
|
|
account.5.blf.subscribe_period = 1800
|
|
|
|
account.5.blf.subscribe_event =
|
|
account.5.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.5.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.5.bla_number =
|
|
account.5.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.5.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.5.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.5.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.5.codec.Y.rtpmap =
|
|
|
|
account.5.codec.1.enable = 1
|
|
account.5.codec.1.payload_type = PCMU
|
|
account.5.codec.1.priority = 1
|
|
account.5.codec.1.rtpmap = 0
|
|
|
|
account.5.codec.2.enable = 1
|
|
account.5.codec.2.payload_type = PCMA
|
|
account.5.codec.2.priority = 2
|
|
account.5.codec.2.rtpmap = 8
|
|
|
|
account.5.codec.3.enable = 0
|
|
account.5.codec.3.payload_type = G723_53
|
|
account.5.codec.3.priority =0
|
|
account.5.codec.3.rtpmap = 4
|
|
|
|
account.5.codec.4.enable = 0
|
|
account.5.codec.4.payload_type = G723_63
|
|
account.5.codec.4.priority = 0
|
|
account.5.codec.4.rtpmap = 4
|
|
|
|
account.5.codec.5.enable = 1
|
|
account.5.codec.5.payload_type = G729
|
|
account.5.codec.5.priority = 3
|
|
account.5.codec.5.rtpmap = 18
|
|
|
|
account.5.codec.6.enable = 1
|
|
account.5.codec.6.payload_type = G722
|
|
account.5.codec.6.priority = 4
|
|
account.5.codec.6.rtpmap = 9
|
|
|
|
account.5.codec.7.enable = 0
|
|
account.5.codec.7.payload_type = iLBC
|
|
account.5.codec.7.priority = 0
|
|
account.5.codec.7.rtpmap = 106
|
|
|
|
account.5.codec.8.enable = 0
|
|
account.5.codec.8.payload_type = G726-16
|
|
account.5.codec.8.priority = 0
|
|
account.5.codec.8.rtpmap = 103
|
|
|
|
account.5.codec.9.enable = 0
|
|
account.5.codec.9.payload_type = G726-24
|
|
account.5.codec.9.priority = 0
|
|
account.5.codec.9.rtpmap = 104
|
|
|
|
account.5.codec.10.enable = 0
|
|
account.5.codec.10.payload_type = G726-32
|
|
account.5.codec.10.priority = 0
|
|
account.5.codec.10.rtpmap = 102
|
|
|
|
account.5.codec.11.enable = 0
|
|
account.5.codec.11.payload_type = G726-40
|
|
account.5.codec.11.priority = 0
|
|
account.5.codec.11.rtpmap = 105
|
|
|
|
account.5.codec.12.enable = 0
|
|
account.5.codec.12.payload_type = GSM
|
|
account.5.codec.12.priority = 0
|
|
account.5.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.5.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.5.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.5.anonymous_call = 0
|
|
account.5.anonymous_call_oncode =
|
|
account.5.anonymous_call_offcode =
|
|
|
|
account.5.reject_anonymous_call =
|
|
account.5.anonymous_reject_oncode =
|
|
account.5.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.5.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.5.group_pickup_code =
|
|
account.5.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.5.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.5.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.5.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.5.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.5.ringtone.ring_type =
|
|
|
|
account.5.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.5.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.5.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.5.cid_source =
|
|
|
|
account.5.cid_source_privacy = 1
|
|
account.5.cid_source_ppi = 1
|
|
account.5.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.5.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.5.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.5.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.5.music_on_hold_type =
|
|
|
|
account.5.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.5.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.5.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.5.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.5.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.5.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.5.dnd.enable =
|
|
account.5.dnd.on_code =
|
|
account.5.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.5.always_fwd.enable =
|
|
account.5.always_fwd.target =
|
|
account.5.always_fwd.off_code =
|
|
account.5.always_fwd.on_code =
|
|
|
|
account.5.busy_fwd.enable =
|
|
account.5.busy_fwd.target =
|
|
account.5.busy_fwd.off_code =
|
|
account.5.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.5.timeout_fwd.enable =
|
|
account.5.timeout_fwd.target =
|
|
account.5.timeout_fwd.timeout =
|
|
account.5.timeout_fwd.off_code =
|
|
account.5.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.5.hoteling.enable = 0
|
|
account.5.hoteling.user_id = 0
|
|
account.5.hoteling.password = 0
|
|
account.5.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.5.acd.enable = 0
|
|
account.5.acd.unavailable_reason_enable = 0
|
|
account.5.acd.available = 0
|
|
account.5.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.5.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.5.bw_acd_reason_code.1 =
|
|
|
|
account.5.reason_code.1 =
|
|
account.5.reason_code_name.1 = 0
|
|
account.5.bw_disp_code.1 =
|
|
account.5.bw_disp_code_name.1 =
|
|
account.5.supervisor_info_code.1 =
|
|
account.5.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.5.call_center.call_info_enable = 0
|
|
account.5.call_center.show_call_info_time = 30
|
|
account.5.call_center.disp_code_enable = 0
|
|
account.5.call_center.trace_enable = 0
|
|
account.5.call_center.emergency_enable = 0
|
|
account.5.call_center.queue_status_enable = 0
|
|
account.5.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.5.xsi.user =
|
|
account.5.xsi.password =
|
|
account.5.xsi.host =
|
|
account.5.xsi.server_type =
|
|
account.5.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
##0-ipv4, 1-ipv6, 2-ipv4&ipv6
|
|
network.ip_address_mode = 2
|
|
|
|
network.ipv6_prefix = 64
|
|
network.ipv6_internet_port.type =
|
|
network.ipv6_internet_port.ip =
|
|
network.ipv6_internet_port.gateway =
|
|
network.ipv6_primary_dns =
|
|
network.ipv6_secondary_dns =
|
|
network.ipv6_icmp_v6.enable =
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server;
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}
|
|
{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}
|
|
|
|
#######################################################################################
|
|
## Account 6 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($user_password_6) }
|
|
account.6.enable = 1
|
|
{else}
|
|
account.6.enable = 0
|
|
{/if}
|
|
account.6.label = {$display_name_6}
|
|
account.6.display_name = {$display_name_6}
|
|
account.6.auth_name = {$auth_id_6}
|
|
account.6.password = {$user_password_6}
|
|
account.6.user_name = {$user_id_6}
|
|
account.6.sip_server_host = {$server_address_6}
|
|
account.6.sip_server_port = {$sip_port_6}
|
|
account.6.outbound_host = {$outbound_proxy_6}
|
|
account.6.outbound_port = 5060
|
|
account.6.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if}
|
|
{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if}
|
|
{if $sip_transport_6 == 'tls'}account.6.transport = 2{/if}
|
|
{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if}
|
|
|
|
account.6.outbound_proxy.1.address = {$outbound_proxy_primary_6}
|
|
account.6.outbound_proxy.2.address = {$outbound_proxy_secondary_6}
|
|
account.6.outbound_proxy_enable = {if isset($outbound_proxy_primary_6)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.6.reregister_enable = 0
|
|
account.6.retry_counts =
|
|
account.6.failback_mode = 0
|
|
account.6.failback_timeout = 3600
|
|
account.6.naptr_build = 0
|
|
account.6.fallback.redundancy_type = 0
|
|
account.6.fallback.timeout = 120
|
|
account.6.sip_server.1.address =
|
|
account.6.sip_server.1.port = 5060
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.6.sip_server.1.expires = {$register_expires_6}
|
|
account.6.sip_server.1.retry_counts = 3
|
|
account.6.sip_server.1.failback_mode = 0
|
|
account.6.sip_server.1.failback_timeout = 3600
|
|
account.6.sip_server.1.register_on_enable = 0
|
|
account.6.sip_server.2.address =
|
|
account.6.sip_server.2.port = 5060
|
|
account.6.sip_server.2.expires = 3600
|
|
account.6.sip_server.2.retry_counts = 3
|
|
account.6.sip_server.2.failback_mode = 0
|
|
account.6.sip_server.2.failback_timeout = 3600
|
|
account.6.sip_server.2.register_on_enable = 0
|
|
account.6.dns_cache_type = 1
|
|
|
|
account.6.dns_cache_a.1.name =
|
|
account.6.dns_cache_a.1.ip =
|
|
account.6.dns_cache_a.1.ttl = 300
|
|
|
|
account.6.dns_cache_srv.1.name =
|
|
account.6.dns_cache_srv.1.port = 0
|
|
account.6.dns_cache_srv.1.priority = 0
|
|
account.6.dns_cache_srv.1.target =
|
|
account.6.dns_cache_srv.1.weight = 0
|
|
account.6.dns_cache_srv.1.ttl = 300
|
|
account.6.dns_cache_naptr.1.name =
|
|
account.6.dns_cache_naptr.1.flags =
|
|
account.6.dns_cache_naptr.1.order = 0
|
|
account.6.dns_cache_naptr.1.preference = 0
|
|
account.6.dns_cache_naptr.1.replace =
|
|
account.6.dns_cache_naptr.1.service =
|
|
account.6.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.6.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.6.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.6.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.6.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.6.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.6.srv_ttl_timer_enable =
|
|
account.6.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.6.register_mac =
|
|
account.6.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.6.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.nat.nat_traversal = 0
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.6.nat.nat_traversal = 0
|
|
|
|
account.6.nat.stun_server =
|
|
account.6.nat.stun_port = 3478
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.6.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.6.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.6.nat.rport = {$yealink_rport_6}
|
|
|
|
|
|
#######################################################################################
|
|
## Account6 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.6.advanced.timer_t1 = 0.5
|
|
account.6.advanced.timer_t2 = 4
|
|
account.6.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.6 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.6.subscribe_mwi = 0
|
|
account.6.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.6.subscribe_mwi_to_vm = 0
|
|
|
|
account.6.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.6.blf.blf_list_uri =
|
|
|
|
account.6.blf_list_code =
|
|
account.6.blf_list_barge_in_code =
|
|
account.6.blf.subscribe_period = 1800
|
|
|
|
account.6.blf.subscribe_event =
|
|
account.6.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
account.6.shared_line =
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.6.bla_number =
|
|
account.6.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.6.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.6.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.6.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.6.codec.Y.rtpmap =
|
|
|
|
account.6.codec.1.enable = 1
|
|
account.6.codec.1.payload_type = PCMU
|
|
account.6.codec.1.priority = 1
|
|
account.6.codec.1.rtpmap = 0
|
|
|
|
account.6.codec.2.enable = 1
|
|
account.6.codec.2.payload_type = PCMA
|
|
account.6.codec.2.priority = 2
|
|
account.6.codec.2.rtpmap = 8
|
|
|
|
account.6.codec.3.enable = 0
|
|
account.6.codec.3.payload_type = G723_53
|
|
account.6.codec.3.priority =0
|
|
account.6.codec.3.rtpmap = 4
|
|
|
|
account.6.codec.4.enable = 0
|
|
account.6.codec.4.payload_type = G723_63
|
|
account.6.codec.4.priority = 0
|
|
account.6.codec.4.rtpmap = 4
|
|
|
|
account.6.codec.5.enable = 1
|
|
account.6.codec.5.payload_type = G729
|
|
account.6.codec.5.priority = 3
|
|
account.6.codec.5.rtpmap = 18
|
|
|
|
account.6.codec.6.enable = 1
|
|
account.6.codec.6.payload_type = G722
|
|
account.6.codec.6.priority = 4
|
|
account.6.codec.6.rtpmap = 9
|
|
|
|
account.6.codec.7.enable = 0
|
|
account.6.codec.7.payload_type = iLBC
|
|
account.6.codec.7.priority = 0
|
|
account.6.codec.7.rtpmap = 106
|
|
|
|
account.6.codec.8.enable = 0
|
|
account.6.codec.8.payload_type = G726-16
|
|
account.6.codec.8.priority = 0
|
|
account.6.codec.8.rtpmap = 103
|
|
|
|
account.6.codec.9.enable = 0
|
|
account.6.codec.9.payload_type = G726-24
|
|
account.6.codec.9.priority = 0
|
|
account.6.codec.9.rtpmap = 104
|
|
|
|
account.6.codec.10.enable = 0
|
|
account.6.codec.10.payload_type = G726-32
|
|
account.6.codec.10.priority = 0
|
|
account.6.codec.10.rtpmap = 102
|
|
|
|
account.6.codec.11.enable = 0
|
|
account.6.codec.11.payload_type = G726-40
|
|
account.6.codec.11.priority = 0
|
|
account.6.codec.11.rtpmap = 105
|
|
|
|
account.6.codec.12.enable = 0
|
|
account.6.codec.12.payload_type = GSM
|
|
account.6.codec.12.priority = 0
|
|
account.6.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.6.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.6.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.6.anonymous_call = 0
|
|
account.6.anonymous_call_oncode =
|
|
account.6.anonymous_call_offcode =
|
|
|
|
account.6.reject_anonymous_call =
|
|
account.6.anonymous_reject_oncode =
|
|
account.6.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.5.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.6.group_pickup_code =
|
|
account.56.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.6.dtmf.type =
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.6.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.6.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.6.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.6.ringtone.ring_type =
|
|
|
|
account.6.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.6.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.6.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.6.cid_source =
|
|
|
|
account.6.cid_source_privacy = 1
|
|
account.6.cid_source_ppi = 1
|
|
account.6.cp_source = 0
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.6.session_timer.enable =
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.6.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.6.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.6.music_on_hold_type =
|
|
|
|
account.6.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.6.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.6.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.6.100rel_enable =
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.6.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.6.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.6.dnd.enable =
|
|
account.6.dnd.on_code =
|
|
account.6.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.6.always_fwd.enable =
|
|
account.6.always_fwd.target =
|
|
account.6.always_fwd.off_code =
|
|
account.6.always_fwd.on_code =
|
|
|
|
account.6.busy_fwd.enable =
|
|
account.6.busy_fwd.target =
|
|
account.6.busy_fwd.off_code =
|
|
account.6.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.6.timeout_fwd.enable =
|
|
account.6.timeout_fwd.target =
|
|
account.6.timeout_fwd.timeout =
|
|
account.6.timeout_fwd.off_code =
|
|
account.6.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.6.hoteling.enable = 0
|
|
account.6.hoteling.user_id = 0
|
|
account.6.hoteling.password = 0
|
|
account.6.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.6.acd.enable = 0
|
|
account.6.acd.unavailable_reason_enable = 0
|
|
account.6.acd.available = 0
|
|
account.6.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.6.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.6.bw_acd_reason_code.1 =
|
|
|
|
account.6.reason_code.1 =
|
|
account.6.reason_code_name.1 = 0
|
|
account.6.bw_disp_code.1 =
|
|
account.6.bw_disp_code_name.1 =
|
|
account.6.supervisor_info_code.1 =
|
|
account.6.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.6.call_center.call_info_enable = 0
|
|
account.6.call_center.show_call_info_time = 30
|
|
account.6.call_center.disp_code_enable = 0
|
|
account.6.call_center.trace_enable = 0
|
|
account.6.call_center.emergency_enable = 0
|
|
account.6.call_center.queue_status_enable = 0
|
|
account.6.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.6.xsi.user =
|
|
account.6.xsi.password =
|
|
account.6.xsi.host =
|
|
account.6.xsi.server_type =
|
|
account.6.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
##0-ipv4, 1-ipv6, 2-ipv4&ipv6
|
|
network.ip_address_mode = 2
|
|
|
|
network.ipv6_prefix = 64
|
|
network.ipv6_internet_port.type =
|
|
network.ipv6_internet_port.ip =
|
|
network.ipv6_internet_port.gateway =
|
|
network.ipv6_primary_dns =
|
|
network.ipv6_secondary_dns =
|
|
network.ipv6_icmp_v6.enable =
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server;
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}
|
|
{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}
|
|
{if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}
|
|
|
|
#######################################################################################
|
|
## Line Key ##
|
|
#######################################################################################
|
|
|
|
#The x of the parameter "linekey.x.line" ranges from 1 to 6.
|
|
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
|
|
#linekey.x.lable--Define the label for each line key. Meet-Me Conference "1" or BLF "16" require pick_value.
|
|
|
|
{foreach $keys['line'] as $row}
|
|
#Configure Line Key {$row.device_key_id}
|
|
linekey.{$row.device_key_id}.line = {$row.device_key_line}
|
|
linekey.{$row.device_key_id}.value = {$row.device_key_value}
|
|
{if $row.device_key_type == "1" || $row.device_key_type == "16"}
|
|
linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
|
|
{else}
|
|
linekey.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
{/if}
|
|
linekey.{$row.device_key_id}.type = {$row.device_key_type}
|
|
linekey.{$row.device_key_id}.xml_phonebook =
|
|
linekey.{$row.device_key_id}.label = {$row.device_key_label}
|
|
|
|
{/foreach}
|
|
|
|
|
|
#######################################################################################
|
|
## Memory Key (For T38G only) ##
|
|
#######################################################################################
|
|
#X ranges from 1 to 10;
|
|
#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
|
|
#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line.
|
|
#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1.
|
|
#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user.
|
|
#memorykey.x.extension--Enter the pickup code, this parameter is only appilicable to BLF.
|
|
#memorykey.x.type--Assign the desired feature to the memory key.
|
|
#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS
|
|
# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL
|
|
# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser
|
|
# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group
|
|
#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
|
|
#memorykey.x.sub_type =
|
|
|
|
{foreach $keys["memory"] as $row}
|
|
#Expansion Memory Key {$row.device_key_id}
|
|
memorykey.{$row.device_key_id}.type = {$row.device_key_type}
|
|
memorykey.{$row.device_key_id}.line = {$row.device_key_line}
|
|
memorykey.{$row.device_key_id}.value = {$row.device_key_value}
|
|
memorykey.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
memorykey.{$row.device_key_id}.label = {$row.device_key_label}
|
|
memorykey.{$row.device_key_id}.xml_phonebook =
|
|
memorykey.{$row.device_key_id}.sub_type =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Programmable Key (For T38G only) ##
|
|
##########################################################################################
|
|
#X ranges from 1 to 15.
|
|
#programablekey.x.type--Customize the programmable key type.
|
|
#The valid types are:
|
|
#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom
|
|
#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook
|
|
#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock
|
|
#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
|
|
#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line.
|
|
#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1.
|
|
|
|
{foreach $keys["programmable"] as $row}
|
|
programablekey.{$row.device_key_id}.type = {$row.device_key_type}
|
|
programablekey.{$row.device_key_id}.line = {$row.device_key_line}
|
|
programablekey.{$row.device_key_id}.value = {$row.device_key_value}
|
|
programablekey.{$row.device_key_id}.xml_phonebook =
|
|
programablekey.{$row.device_key_id}.history_type =
|
|
programablekey.{$row.device_key_id}.label = {$row.device_key_label}
|
|
{/foreach}
|
|
|
|
#programablekey.x.value =
|
|
#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
|
|
#programablekey.x.history_type =
|
|
|
|
#programablekey.x.label--This parameter is only available to the key 1 to key 4.
|
|
|
|
#History
|
|
#programablekey.1.type = 28
|
|
#programablekey.1.line = 1
|
|
#programablekey.1.value =
|
|
#programablekey.1.xml_phonebook =
|
|
#programablekey.1.history_type =
|
|
#programablekey.1.label =
|
|
|
|
#Directory
|
|
#programablekey.2.type = 29
|
|
#programablekey.2.line = 1
|
|
#programablekey.2.value =
|
|
#programablekey.2.xml_phonebook =
|
|
#programablekey.2.history_type =
|
|
#programablekey.2.label =
|
|
|
|
#N/A - Disable DND
|
|
programablekey.3.type = 0
|
|
programablekey.3.line =
|
|
programablekey.3.value =
|
|
programablekey.3.xml_phonebook =
|
|
programablekey.3.history_type =
|
|
programablekey.3.label =
|
|
|
|
#Menu
|
|
#programablekey.4.type = 30
|
|
#programablekey.4.line =
|
|
#programablekey.4.value =
|
|
#programablekey.4.xml_phonebook =
|
|
#programablekey.4.history_type =
|
|
#programablekey.4.label =
|
|
|
|
##########################################################################################
|
|
## Expansion Module 1 ##
|
|
##########################################################################################
|
|
#X ranges from 1 to 16, Y ranges from 1 to 40.
|
|
#expansion_module.x.key.y.type = 37 (Switch by default)
|
|
#expansion_module.x.key.y.line = 0
|
|
#expansion_module.x.key.y.value =
|
|
#expansion_module.x.key.y.extension =
|
|
#expansion_module.x.key.y.label =
|
|
#expansion_module.X.key.Y.xml_phonebook =
|
|
|
|
{$rownum = 1}
|
|
|
|
{foreach $keys["expansion"] as $row}
|
|
{if $rownum <= 40}
|
|
expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.1.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.1.key.{$row.device_key_id}.xml_phonebook =
|
|
{else}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.type = {$row.device_key_type}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.line = {$row.device_key_line}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.value = {$row.device_key_value}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.extension = {$row.device_key_extension}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.label = {$row.device_key_label}
|
|
expansion_module.2.key.{$row.device_key_id - 40}.xml_phonebook =
|
|
{/if}
|
|
{$rownum = $rownum + 1}
|
|
{/foreach}
|
|
|
|
##########################################################################################
|
|
## Expansion Module 2 ##
|
|
##########################################################################################
|
|
|
|
#Expansion module 2 key 1
|
|
#expansion_module.2.key.1.type =
|
|
#expansion_module.2.key.1.line =
|
|
#expansion_module.2.key.1.value =
|
|
#expansion_module.2.key.1.extension =
|
|
#expansion_module.2.key.1.label =
|
|
#expansion_module.2.key.1.xml_phonebook =
|
|
#expansion_module.2.key.1.type =
|
|
#expansion_module.2.key.1.label =
|