fusionpbx/resources/templates/provision/cisco/spa192/{$mac}.xml

<!--<?xmlversion="1.0" encoding="UTF-8"?>-->
<flat-profile>
	
<!--Parametersfor SystemTab -->
<!--SystemConfiguration-->
<Restricted_Access_Domains ua="na"/>
<IVR_Admin_Passwd ua="na"/>
<Network_Startup_Delay ua="na">3</Network_Startup_Delay>

<!--MiscellaneousSettings-->
<DNS_Query_TTL_Ignore ua="na">No</DNS_Query_TTL_Ignore>

Parametersfor ProvisioningTab 
<!--ConfigurationProfile-->
<Provision_Enable ua="na">Yes</Provision_Enable>
<Resync_On_Reset ua="na">Yes</Resync_On_Reset>
<Resync_Random_Delay ua="na">2</Resync_Random_Delay>
<Resync_At__HHmm_ ua="na"/>
<Resync_At_Random_Delay ua="na">0</Resync_At_Random_Delay>
<Resync_Periodic ua="na">0</Resync_Periodic>
<Resync_Error_Retry_Delay ua="na">30</Resync_Error_Retry_Delay>
<Forced_Resync_Delay ua="na">20</Forced_Resync_Delay>
<Resync_From_SIP ua="na">Yes</Resync_From_SIP>
<Resync_After_Upgrade_Attempt ua="na">Yes</Resync_After_Upgrade_Attempt>
<Resync_Trigger_1 ua="na"/>
<Resync_Trigger_2 ua="na"/>
<Resync_Fails_On_FNF ua="na">Yes</Resync_Fails_On_FNF>
<!--{if isset ($spa_provision_url)}-->
<Profile_Rule>[--uid {$http_auth_username} --pwd {$http_auth_password}]http://{$domain_name}{$project_path}/app/provision/?mac=$MA</Profile_Rule>
{else}
<Profile_Rule>http://{$domain_name}{$project_path}/app/provision/?mac=$MA</Profile_Rule>
{/if}
<Profile_Rule_B ua="na"/>
<Profile_Rule_C ua="na"/>
<Profile_Rule_D ua="na"/>
<DHCP_Option_To_Use ua="na"/> <!--Default: 66,160,159,150-->
<Transport_Protocol ua="na">HTTP</Transport_Protocol> <!--Default: HTTP, options: None/TFTP/HTTP/HTTPS-->
<Log_Resync_Request_Msg ua="na">$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Request_Msg>
<Log_Resync_Success_Msg ua="na">$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Success_Msg>
<Log_Resync_Failure_Msg ua="na">$PN $MAC -- Resync failed: $ERR</Log_Resync_Failure_Msg>
<Report_Rule ua="na"/>
<SP_Default ua="na"/>

<!--FirmwareUpgrade-->
<Upgrade_Enable ua="na">Yes</Upgrade_Enable>
<Upgrade_Error_Retry_Delay ua="na">3600</Upgrade_Error_Retry_Delay>
<Downgrade_Rev_Limit ua="na"/>
<Upgrade_Rule ua="na"/>
<Log_Upgrade_Request_Msg ua="na">$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH</Log_Upgrade_Request_Msg>
<Log_Upgrade_Success_Msg ua="na">$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR</Log_Upgrade_Success_Msg>
<Log_Upgrade_Failure_Msg ua="na">$PN $MAC -- Upgrade failed: $ERR</Log_Upgrade_Failure_Msg>
<License_Keys ua="na"/>
<Recovery_URL ua="na"/>

<!--CA Settings-->
<Custom_CA_URL ua="na"/>

<!--GeneralPurposeParameters-->
<GPP_A ua="na"/>
<GPP_B ua="na"/>
<GPP_C ua="na"/>
<GPP_D ua="na"/>
<GPP_E ua="na"/>
<GPP_F ua="na"/>
<GPP_G ua="na"/>
<GPP_H ua="na"/>
<GPP_I ua="na"/>
<GPP_J ua="na"/>
<GPP_K ua="na"/>
<GPP_L ua="na"/>
<GPP_M ua="na"/>
<GPP_N ua="na"/>
<GPP_O ua="na"/>
<GPP_P ua="na"/>
<GPP_SA ua="na"/>
<GPP_SB ua="na"/>
<GPP_SC ua="na"/>
<GPP_SD ua="na"/>

<!--Parametersfor SIP Tab -->
<!--SIP Parameters-->
<Max_Forward ua="na">70</Max_Forward>
<Max_Redirection ua="na">5</Max_Redirection>
<Max_Auth ua="na">2</Max_Auth>
<SIP_User_Agent_Name ua="na">$VERSION</SIP_User_Agent_Name>
<SIP_Server_Name ua="na">$VERSION</SIP_Server_Name>
<SIP_Reg_User_Agent_Name ua="na"/>
<SIP_Reg_Starting_Sequence_Number ua="na"/>
<SIP_Accept_Language ua="na"/>
<DTMF_Relay_MIME_Type ua="na">application/dtmf-relay</DTMF_Relay_MIME_Type>
<Hook_Flash_MIME_Type ua="na">application/hook-flash</Hook_Flash_MIME_Type>
<Remove_Last_Reg ua="na">Yes</Remove_Last_Reg>
<Use_Compact_Header ua="na">No</Use_Compact_Header>
<Escape_Display_Name ua="na">No</Escape_Display_Name>
<RFC_2543_Call_Hold ua="na">Yes</RFC_2543_Call_Hold>
<Mark_All_AVT_Packets ua="na">Yes</Mark_All_AVT_Packets>
<AVT_Packet_Size ua="na">ptime</AVT_Packet_Size>
<SIP_TCP_Port_Min ua="na">5060</SIP_TCP_Port_Min> <!--Default: 5060, The lowest TCP port number that can be used for SIP sessions-->
<SIP_TCP_Port_Max ua="na">5090</SIP_TCP_Port_Max> <!--Default: 5080, The highest TCP port number that can be used for SIP sessions-->
<CTI_Enable ua="na">No</CTI_Enable> <!--Default: No, options: Yes/No-->
<Keep_Referee_When_REFER_Failed ua="na">No</Keep_Referee_When_REFER_Failed>
<Caller_ID_Header ua="na">PAID-RPID-FROM</Caller_ID_Header>

<!--SIP TimerValues(sec)-->
<SIP_T1 ua="na">.5</SIP_T1>
<SIP_T2 ua="na">4</SIP_T2>
<SIP_T4 ua="na">5</SIP_T4>
<SIP_Timer_B ua="na">32</SIP_Timer_B>
<SIP_Timer_F ua="na">16</SIP_Timer_F>
<SIP_Timer_H ua="na">32</SIP_Timer_H>
<SIP_Timer_D ua="na">32</SIP_Timer_D>
<SIP_Timer_J ua="na">32</SIP_Timer_J>
<INVITE_Expires ua="na">240</INVITE_Expires>
<ReINVITE_Expires ua="na">30</ReINVITE_Expires>
<Reg_Min_Expires ua="na">1</Reg_Min_Expires>
<Reg_Max_Expires ua="na">7200</Reg_Max_Expires>
<Reg_Retry_Intvl ua="na">30</Reg_Retry_Intvl>
<Reg_Retry_Long_Intvl ua="na">1200</Reg_Retry_Long_Intvl>
<Reg_Retry_Random_Delay ua="na">0</Reg_Retry_Random_Delay>
<Reg_Retry_Long_Random_Delay ua="na">0</Reg_Retry_Long_Random_Delay>
<Reg_Retry_Intvl_Cap ua="na">0</Reg_Retry_Intvl_Cap>

<!--ResponseStatusCodeHandling-->
<SIT1_RSC ua="na"/>
<SIT2_RSC ua="na"/>
<SIT3_RSC ua="na"/>
<SIT4_RSC ua="na"/>
<Try_Backup_RSC ua="na"/>
<Retry_Reg_RSC ua="na"/>

<!--RTP Parameters-->
<RTP_Port_Min ua="na">16384</RTP_Port_Min>
<RTP_Port_Max ua="na">32768</RTP_Port_Max>
<RTP_Packet_Size ua="na">0.020</RTP_Packet_Size>
<RTP_Tx_Packet_Size_Follows_Remote_SDP ua="na">Yes</RTP_Tx_Packet_Size_Follows_Remote_SDP>
<Max_RTP_ICMP_Err ua="na">0</Max_RTP_ICMP_Err>
<RTCP_Tx_Interval ua="na">0</RTCP_Tx_Interval>
<No_UDP_Checksum ua="na">No</No_UDP_Checksum>
<Stats_In_BYE ua="na">Yes</Stats_In_BYE>

<!--SDP PayloadTypes-->
<NSE_Dynamic_Payload ua="na">100</NSE_Dynamic_Payload>
<AVT_Dynamic_Payload ua="na">101</AVT_Dynamic_Payload>
<INFOREQ_Dynamic_Payload ua="na"/>
<G726r32_Dynamic_Payload ua="na">2</G726r32_Dynamic_Payload>
<EncapRTP_Dynamic_Payload ua="na">112</EncapRTP_Dynamic_Payload>
<RTP-Start-Loopback_Dynamic_Payload ua="na">113</RTP-Start-Loopback_Dynamic_Payload>
<RTP-Start-Loopback_Codec ua="na">G711u</RTP-Start-Loopback_Codec>
<NSE_Codec_Name ua="na">NSE</NSE_Codec_Name>
<AVT_Codec_Name ua="na">telephone-event</AVT_Codec_Name>
<G711u_Codec_Name ua="na">PCMU</G711u_Codec_Name>
<G711a_Codec_Name ua="na">PCMA</G711a_Codec_Name>
<G726r32_Codec_Name ua="na">G726-32</G726r32_Codec_Name>
<G729a_Codec_Name ua="na">G729a</G729a_Codec_Name>
<EncapRTP_Codec_Name ua="na">encaprtp</EncapRTP_Codec_Name>

<!--NAT SupportParameters-->
<Handle_VIA_received ua="na">No</Handle_VIA_received>
<Handle_VIA_rport ua="na">No</Handle_VIA_rport>
<Insert_VIA_received ua="na">No</Insert_VIA_received>
<Insert_VIA_rport ua="na">No</Insert_VIA_rport>
<Substitute_VIA_Addr ua="na">No</Substitute_VIA_Addr>
<Send_Resp_To_Src_Port ua="na">No</Send_Resp_To_Src_Port>
<STUN_Enable ua="na">No</STUN_Enable>
<STUN_Test_Enable ua="na">No</STUN_Test_Enable>
<STUN_Server ua="na"/>
<EXT_IP ua="na"/>
<EXT_RTP_Port_Min ua="na"/>
<NAT_Keep_Alive_Intvl ua="na">15</NAT_Keep_Alive_Intvl>
<Redirect_Keep_Alive ua="na">No</Redirect_Keep_Alive>

<!--Parameters for Line1 Tab -->
<!--General-->
<Line_Enable_1_ ua="na">Yes</Line_Enable_1_> <!--Default: Yes, options: Yes/No, To enable this line for service-->

<!--StreamingAudioServer(SAS)-->
<SAS_Enable_1_ ua="na">No</SAS_Enable_1_>
<SAS_DLG_Refresh_Intvl_1_ ua="na">30</SAS_DLG_Refresh_Intvl_1_>
<SAS_Inbound_RTP_Sink_1_ ua="na"/>

<!--NAT Settings-->
<NAT_Mapping_Enable_1_ ua="na">Yes</NAT_Mapping_Enable_1_> <!--Default: No, options: Yes/No, To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select Yes-->
<NAT_Keep_Alive_Enable_1_ ua="na">Yes</NAT_Keep_Alive_Enable_1_> <!--Default: No, options: Yes/No, To send the configured NAT keep alive message periodically, select Yes-->
<NAT_Keep_Alive_Msg_1_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_1_>
<NAT_Keep_Alive_Dest_1_ ua="na">$PROXY</NAT_Keep_Alive_Dest_1_>

<!--NetworkSettings-->
<SIP_ToS_DiffServ_Value_1_ ua="na">0x68</SIP_ToS_DiffServ_Value_1_>
<SIP_CoS_Value_1_ ua="na">3</SIP_CoS_Value_1_>
<RTP_ToS_DiffServ_Value_1_ ua="na">0xb8</RTP_ToS_DiffServ_Value_1_>
<RTP_CoS_Value_1_ ua="na">6</RTP_CoS_Value_1_>
<Network_Jitter_Level_1_ ua="na">high</Network_Jitter_Level_1_> <!--Default: high, Select the appropriate setting: low, medium, high, very high, or extremely high (Set to High for FAX)-->
<Jitter_Buffer_Adjustment_1_ ua="na">Yes</Jitter_Buffer_Adjustment_1_> <!--Default: Yes, options: Yes/No, To enable or disable this featuree-->

<!--SIP Settings-->
<SIP_Transport_1_ ua="na">UDP</SIP_Transport_1_> <!--Default: UDP, options: UDP/TCP/TLS-->
<SIP_Port_1_ ua="na">5060</SIP_Port_1_> <!--Default: 5060, Port number of the SIP message listening and transmission port-->
<SIP_100REL_Enable_1_ ua="na">No</SIP_100REL_Enable_1_>
<EXT_SIP_Port_1_ ua="na"/>
<Auth_Resync-Reboot_1_ ua="na">Yes</Auth_Resync-Reboot_1_>
<SIP_Proxy-Require_1_ ua="na"/>
<SIP_Remote-Party-ID_1_ ua="na">Yes</SIP_Remote-Party-ID_1_>
<SIP_GUID_1_ ua="na">No</SIP_GUID_1_>
<RTP_Log_Intvl_1_ ua="na">0</RTP_Log_Intvl_1_>
<Restrict_Source_IP_1_ ua="na">No</Restrict_Source_IP_1_>
<Referor_Bye_Delay_1_ ua="na">4</Referor_Bye_Delay_1_>
<Refer_Target_Bye_Delay_1_ ua="na">0</Refer_Target_Bye_Delay_1_>
<Referee_Bye_Delay_1_ ua="na">0</Referee_Bye_Delay_1_>
<Refer-To_Target_Contact_1_ ua="na">No</Refer-To_Target_Contact_1_>
<Sticky_183_1_ ua="na">No</Sticky_183_1_>
<Auth_INVITE_1_ ua="na">No</Auth_INVITE_1_>
<Reply_182_On_Call_Waiting_1_ ua="na">No</Reply_182_On_Call_Waiting_1_>
<Use_Anonymous_With_RPID_1_ ua="na">Yes</Use_Anonymous_With_RPID_1_>
<Use_Local_Addr_In_FROM_1_ ua="na">No</Use_Local_Addr_In_FROM_1_>
<Broadsoft_ALTC_1_ ua="na">No</Broadsoft_ALTC_1_>

<!--CallFeatureSettings-->
<Blind_Attn-Xfer_Enable_1_ ua="na">No</Blind_Attn-Xfer_Enable_1_>
<MOH_Server_1_ ua="na"/>
<Xfer_When_Hangup_Conf_1_ ua="na">Yes</Xfer_When_Hangup_Conf_1_>
<Conference_Bridge_URL_1_ ua="na"/>
<Conference_Bridge_Ports_1_ ua="na">3</Conference_Bridge_Ports_1_>
<Enable_IP_Dialing_1_ ua="na">No</Enable_IP_Dialing_1_>
<Emergency_Number_1_ ua="na"/>
<Mailbox_ID_1_ ua="na"/>
<Feature_Key_Sync_1_ ua="na">No</Feature_Key_Sync_1_> 

<!--Proxyand Registration-->
<Proxy_1_ ua="na">{$domain_name}</Proxy_1_>
<Outbound_Proxy_1_ ua="na">{$account.1.outbound_proxy_primary}</Outbound_Proxy_1_>
<Use_Outbound_Proxy_1_ ua="na">{if isset ($account.1.outbound_proxy_primary)}Yes{else}No{/if}</Use_Outbound_Proxy_1_>
<Use_OB_Proxy_In_Dialog_1_ ua="na">Yes</Use_OB_Proxy_In_Dialog_1_>
<Registrar_Server_1_ ua="na"/>
<Register_1_ ua="na">Yes</Register_1_>
<Make_Call_Without_Reg_1_ ua="na">No</Make_Call_Without_Reg_1_>
<Register_Expires_1_ ua="na">{$account.1.register_expires}</Register_Expires_1_>
<Ans_Call_Without_Reg_1_ ua="na">No</Ans_Call_Without_Reg_1_>
<Use_DNS_SRV_1_ ua="na">Yes</Use_DNS_SRV_1_> <!--Default: No, options: Yes/No, Set to Yes for DNS SRV lookup for Proxy and Outbound Proxy-->
<DNS_SRV_Auto_Prefix_1_ ua="na">Yes</DNS_SRV_Auto_Prefix_1_> <!--Default: No, options: Yes/No, Set to Yes, prepend the Proxy or Outbound Proxy name with _sip._udp when performing a DNS SRV lookup on that name-->
<Proxy_Fallback_Intvl_1_ ua="na">3600</Proxy_Fallback_Intvl_1_>
<Proxy_Redundancy_Method_1_ ua="na">Normal</Proxy_Redundancy_Method_1_>
<Mailbox_Subscribe_URL_1_ ua="na"/>
<Mailbox_Subscribe_Expires_1_ ua="na"/>
<Auto_Register_When_Failover_1_ ua="na">No</Auto_Register_When_Failover_1_>

<!--SubscriberInformation-->
<Display_Name_1_ ua="na">{$account.1.display_name}</Display_Name_1_>
<User_ID_1_ ua="na">{$account.1.user_id}</User_ID_1_>
<Password_1_ ua="na">{$account.1.password}</Password_1_>
<Use_Auth_ID_1_ ua="na">No</Use_Auth_ID_1_>
<Auth_ID_1_ ua="na"/>
<Resident_Online_Number_1_ ua="na"/>
<SIP_URI_1_ ua="na"/>

<!--SupplementaryServiceSubscription-->
<Call_Waiting_Serv_1_ ua="na">{$spa_call_waiting}</Call_Waiting_Serv_1_>
<Block_CID_Serv_1_ ua="na">Yes</Block_CID_Serv_1_>
<Block_ANC_Serv_1_ ua="na">Yes</Block_ANC_Serv_1_>
<Dist_Ring_Serv_1_ ua="na">Yes</Dist_Ring_Serv_1_>
<Cfwd_All_Serv_1_ ua="na">Yes</Cfwd_All_Serv_1_>
<Cfwd_Busy_Serv_1_ ua="na">Yes</Cfwd_Busy_Serv_1_>
<Cfwd_No_Ans_Serv_1_ ua="na">Yes</Cfwd_No_Ans_Serv_1_>
<Cfwd_Sel_Serv_1_ ua="na">Yes</Cfwd_Sel_Serv_1_>
<Cfwd_Last_Serv_1_ ua="na">Yes</Cfwd_Last_Serv_1_>
<Block_Last_Serv_1_ ua="na">Yes</Block_Last_Serv_1_>
<Accept_Last_Serv_1_ ua="na">Yes</Accept_Last_Serv_1_>
<DND_Serv_1_ ua="na">Yes</DND_Serv_1_>
<CID_Serv_1_ ua="na">Yes</CID_Serv_1_>
<CWCID_Serv_1_ ua="na">Yes</CWCID_Serv_1_>
<Call_Return_Serv_1_ ua="na">Yes</Call_Return_Serv_1_>
<Call_Redial_Serv_1_ ua="na">Yes</Call_Redial_Serv_1_>
<Call_Back_Serv_1_ ua="na">Yes</Call_Back_Serv_1_>
<Three_Way_Call_Serv_1_ ua="na">Yes</Three_Way_Call_Serv_1_>
<Three_Way_Conf_Serv_1_ ua="na">Yes</Three_Way_Conf_Serv_1_>
<Attn_Transfer_Serv_1_ ua="na">Yes</Attn_Transfer_Serv_1_>
<Unattn_Transfer_Serv_1_ ua="na">Yes</Unattn_Transfer_Serv_1_>
<MWI_Serv_1_ ua="na">Yes</MWI_Serv_1_>
<VMWI_Serv_1_ ua="na">Yes</VMWI_Serv_1_>
<Speed_Dial_Serv_1_ ua="na">Yes</Speed_Dial_Serv_1_>
<Secure_Call_Serv_1_ ua="na">Yes</Secure_Call_Serv_1_>
<Referral_Serv_1_ ua="na">Yes</Referral_Serv_1_>
<Feature_Dial_Serv_1_ ua="na">Yes</Feature_Dial_Serv_1_>
<Service_Announcement_Serv_1_ ua="na">No</Service_Announcement_Serv_1_>
<Reuse_CID_Number_As_Name_1_ ua="na">Yes</Reuse_CID_Number_As_Name_1_>
<CONFCID_Serv_1_ ua="na">Yes</CONFCID_Serv_1_>

<!--AudioConfiguration-->
<Preferred_Codec_1_ ua="na">G711u</Preferred_Codec_1_>
<Second_Preferred_Codec_1_ ua="na">Unspecified</Second_Preferred_Codec_1_>
<Third_Preferred_Codec_1_ ua="na">Unspecified</Third_Preferred_Codec_1_>
<Use_Pref_Codec_Only_1_ ua="na">Yes</Use_Pref_Codec_Only_1_>
<Codec_Negotiation_1_ ua="na">Default</Codec_Negotiation_1_>
<G729a_Enable_1_ ua="na">Yes</G729a_Enable_1_>
<Silence_Supp_Enable_1_ ua="na">No</Silence_Supp_Enable_1_>
<G726-32_Enable_1_ ua="na">Yes</G726-32_Enable_1_>
<Silence_Threshold_1_ ua="na">medium</Silence_Threshold_1_>
<FAX_V21_Detect_Enable_1_ ua="na">Yes</FAX_V21_Detect_Enable_1_>  <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<Echo_Canc_Enable_1_ ua="na">Yes</Echo_Canc_Enable_1_> <!--Default: Yes, options: Yes/No, To enable the use of the echo canceller, select yes. Otherwise, select no-->
<FAX_CNG_Detect_Enable_1_ ua="na">Yes</FAX_CNG_Detect_Enable_1_> <!--Default: Yes, options: Yes/No, To enable detection of the fax Calling Tone (CNG), select yes. Otherwise, select no-->
<FAX_Passthru_Codec_1_ ua="na">G711u</FAX_Passthru_Codec_1_> <!--Default: G711u, options: G711u/G711a, Select the codec for fax passthrough, G711u or G711a-->
<FAX_Codec_Symmetric_1_ ua="na">Yes</FAX_Codec_Symmetric_1_> <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<DTMF_Process_INFO_1_ ua="na">Yes</DTMF_Process_INFO_1_> <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<FAX_Passthru_Method_1_ ua="na">ReINVITE</FAX_Passthru_Method_1_> <!--Default: ReINVITE, Select the fax passthrough method options: None/NSE/ReINVITE-->
<DTMF_Process_AVT_1_ ua="na">Yes</DTMF_Process_AVT_1_> <!--Default: Yes, options: Yes/No, To use the DTMF process AVT feature, select yes. Otherwise, select no-->
<FAX_Process_NSE_1_ ua="na">Yes</FAX_Process_NSE_1_> <!--Default: Yes, options: Yes/No, To use the fax process NSE feature, select yes. Otherwise, select no--> 
<DTMF_Tx_Method_1_ ua="na">Auto</DTMF_Tx_Method_1_> <!--Default: Auto, options: InBand/AVT/INFO/Auto, Select the method to transmit DTMF signals to the far end-->
<FAX_Disable_ECAN_1_ ua="na">No</FAX_Disable_ECAN_1_> <!--Default: No, options: Yes/No, If enabled, this feature automatically disables the echo canceller when a fax tone is detected-->
<DTMF_Tx_Mode_1_ ua="na">Strict</DTMF_Tx_Mode_1_> <!--Default: Strict, options: Normal/Strict, DTMF Detection Tx Mode is available for SIP information and AVT-->
<DTMF_Tx_Strict_Hold_Off_Time_1_ ua="na">70</DTMF_Tx_Strict_Hold_Off_Time_1_> <!--Default: 70, This parameter is in effect only when DTMF Tx Mode is set to strict, and when DTMF Tx Method is set to out-ofband; i.e. either AVT or SIP-INFO-->
<FAX_Enable_T38_1_ ua="na">Yes</FAX_Enable_T38_1_> <!--Default: Yes, options: Yes/No, To enable the use of ITU-T T.38 standard for FAX Relay, select yes.-->
<Hook_Flash_Tx_Method_1_ ua="na">None</Hook_Flash_Tx_Method_1_> <!--Default: None, options: None/AVT/INFO, The MIME type for this message body is taken from the Hook Flash MIME Type setting-->
<FAX_T38_Redundancy_1_ ua="na">1</FAX_T38_Redundancy_1_> <!--Default: 1, The higher the number, the larger the packet size and the more bandwidth consumed-->
<FAX_T38_ECM_Enable_1_ ua="na">Yes</FAX_T38_ECM_Enable_1_> <!--Default: Yes, options: Yes/No, Select yes to enable T.38 Error Correction Mode-->
<FAX_Tone_Detect_Mode_1_ ua="na">caller or callee</FAX_Tone_Detect_Mode_1_> <!--Default: caller or callee, options: caller or callee/caller only/callee only-->
<Symmetric_RTP_1_ ua="na">No</Symmetric_RTP_1_> <!--Default: No, options: Yes/No, Enable symmetric RTP operation. If enabled, the ATA sends RTP packets to the source address and port of the last received valid inbound RTP packet-->
<FAX_T38_Return_to_Voice_1_ ua="na">No</FAX_T38_Return_to_Voice_1_> <!--Default: No, options: Yes/No, When this feature is enabled, upon completion of the fax image transfer, the connection remains established and reverts to a voice call using the previously designated codec-->
<Modem_Line_1_ ua="na">No</Modem_Line_1_>
<RTP_to_Proxy_in_Remote_Hold_1_ ua="na">No</RTP_to_Proxy_in_Remote_Hold_1_>

<!--DialPlan-->
<Dial_Plan_1_ ua="na">{$spa_dial_plan}</Dial_Plan_1_>

<!--FXS PortPolarityConfiguration-->
<Idle_Polarity_1_ ua="na">Forward</Idle_Polarity_1_>
<Caller_Conn_Polarity_1_ ua="na">Forward</Caller_Conn_Polarity_1_>
<Callee_Conn_Polarity_1_ ua="na">Forward</Callee_Conn_Polarity_1_>
<Profile_Stamp_1_ ua="na"/>

<!--Parametersfor Line2 Tab -->
<!--General-->
<Line_Enable_2_ ua="na">Yes</Line_Enable_2_> <!--Default: Yes, options: Yes/No, To enable this line for service-->

<!--StreamingAudioServer(SAS)-->
<SAS_Enable_2_ ua="na">No</SAS_Enable_2_>
<SAS_DLG_Refresh_Intvl_2_ ua="na">30</SAS_DLG_Refresh_Intvl_2_>
<SAS_Inbound_RTP_Sink_2_ ua="na"/>

<!--NAT Settings-->
<NAT_Mapping_Enable_2_ ua="na">Yes</NAT_Mapping_Enable_2_> <!--Default: No, options: Yes/No, To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select Yes-->
<NAT_Keep_Alive_Enable_2_ ua="na">Yes</NAT_Keep_Alive_Enable_2_> <!--Default: No, options: Yes/No, To send the configured NAT keep alive message periodically, select Yes-->
<NAT_Keep_Alive_Msg_2_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_2_>
<NAT_Keep_Alive_Dest_2_ ua="na">$PROXY</NAT_Keep_Alive_Dest_2_>

<!--NetworkSettings-->
<SIP_ToS_DiffServ_Value_2_ ua="na">0x68</SIP_ToS_DiffServ_Value_2_>
<SIP_CoS_Value_2_ ua="na">3</SIP_CoS_Value_2_>
<RTP_ToS_DiffServ_Value_2_ ua="na">0xb8</RTP_ToS_DiffServ_Value_2_>
<RTP_CoS_Value_2_ ua="na">6</RTP_CoS_Value_2_>
<Network_Jitter_Level_2_ ua="na">high</Network_Jitter_Level_2_>
<Jitter_Buffer_Adjustment_2_ ua="na">Yes</Jitter_Buffer_Adjustment_2_>

<!--SIP Settings-->
<SIP_Transport_2_ ua="na">UDP</SIP_Transport_2_> <!--Default: UDP, options: UDP/TCP/TLS-->
<SIP_Port_2_ ua="na">5061</SIP_Port_2_> <!--Default: 5061, Port number of the SIP message listening and transmission port-->
<SIP_100REL_Enable_2_ ua="na">No</SIP_100REL_Enable_2_>
<EXT_SIP_Port_2_ ua="na"/>
<Auth_Resync-Reboot_2_ ua="na">Yes</Auth_Resync-Reboot_2_>
<SIP_Proxy-Require_2_ ua="na"/>
<SIP_Remote-Party-ID_2_ ua="na">Yes</SIP_Remote-Party-ID_2_>
<SIP_GUID_2_ ua="na">No</SIP_GUID_2_>
<RTP_Log_Intvl_2_ ua="na">0</RTP_Log_Intvl_2_>
<Restrict_Source_IP_2_ ua="na">No</Restrict_Source_IP_2_>
<Referor_Bye_Delay_2_ ua="na">4</Referor_Bye_Delay_2_>
<Refer_Target_Bye_Delay_2_ ua="na">0</Refer_Target_Bye_Delay_2_>
<Referee_Bye_Delay_2_ ua="na">0</Referee_Bye_Delay_2_>
<Refer-To_Target_Contact_2_ ua="na">No</Refer-To_Target_Contact_2_>
<Sticky_183_2_ ua="na">No</Sticky_183_2_>
<Auth_INVITE_2_ ua="na">No</Auth_INVITE_2_>
<Reply_182_On_Call_Waiting_2_ ua="na">No</Reply_182_On_Call_Waiting_2_>
<Use_Anonymous_With_RPID_2_ ua="na">Yes</Use_Anonymous_With_RPID_2_>
<Use_Local_Addr_In_FROM_2_ ua="na">No</Use_Local_Addr_In_FROM_2_>
<Broadsoft_ALTC_2_ ua="na">No</Broadsoft_ALTC_2_>

<!--CallFeatureSettings-->
<Blind_Attn-Xfer_Enable_2_ ua="na">No</Blind_Attn-Xfer_Enable_2_>
<MOH_Server_2_ ua="na"/>
<Xfer_When_Hangup_Conf_2_ ua="na">Yes</Xfer_When_Hangup_Conf_2_>
<Conference_Bridge_URL_2_ ua="na"/>
<Conference_Bridge_Ports_2_ ua="na">3</Conference_Bridge_Ports_2_>
<Enable_IP_Dialing_2_ ua="na">No</Enable_IP_Dialing_2_>
<Emergency_Number_2_ ua="na"/>
<Mailbox_ID_2_ ua="na"/>
<Feature_Key_Sync_2_ ua="na">No</Feature_Key_Sync_2_>

<!--Proxyand Registration-->
<Proxy_2_ ua="na">{$domain_name}</Proxy_2_>
<Outbound_Proxy_2_ ua="na">{$account.2.outbound_proxy_primary}</Outbound_Proxy_2_>
<Use_Outbound_Proxy_2_ ua="na">{if isset ($account.2.outbound_proxy_primary)}Yes{else}No{/if}</Use_Outbound_Proxy_2_>
<Use_OB_Proxy_In_Dialog_2_ ua="na">Yes</Use_OB_Proxy_In_Dialog_2_>
<Registrar_Server_2_ ua="na"/>
<Register_2_ ua="na">Yes</Register_2_>
<Make_Call_Without_Reg_2_ ua="na">No</Make_Call_Without_Reg_2_>
<Register_Expires_2_ ua="na">{$account.2.register_expires}</Register_Expires_2_>
<Ans_Call_Without_Reg_2_ ua="na">No</Ans_Call_Without_Reg_2_>
<Use_DNS_SRV_2_ ua="na">Yes</Use_DNS_SRV_2_>  <!--Default: No, options: Yes/No, Set to Yes for DNS SRV lookup for Proxy and Outbound Proxy-->
<DNS_SRV_Auto_Prefix_2_ ua="na">Yes</DNS_SRV_Auto_Prefix_2_> <!--Default: No, options: Yes/No, Set to Yes, prepend the Proxy or Outbound Proxy name with _sip._udp when performing a DNS SRV lookup on that name-->
<Proxy_Fallback_Intvl_2_ ua="na">3600</Proxy_Fallback_Intvl_2_>
<Proxy_Redundancy_Method_2_ ua="na">Normal</Proxy_Redundancy_Method_2_>
<Mailbox_Subscribe_URL_2_ ua="na"/>
<Mailbox_Subscribe_Expires_2_ ua="na"/>
<Auto_Register_When_Failover_2_ ua="na">No</Auto_Register_When_Failover_2_>

<!--SubscriberInformation-->
<Display_Name_2_ ua="na">{$account.2.display_name}</Display_Name_2_>
<User_ID_2_ ua="na">{$account.2.user_id}</User_ID_2_>
<Password_2_ ua="na">{$account.2.password}</Password_2_>
<Use_Auth_ID_2_ ua="na">No</Use_Auth_ID_2_>
<Auth_ID_2_ ua="na"/>
<Resident_Online_Number_2_ ua="na"/>
<SIP_URI_2_ ua="na"/>

<!--SupplementaryServiceSubscription-->
<Call_Waiting_Serv_2_ ua="na">{$spa_call_waiting}</Call_Waiting_Serv_2_>
<Block_CID_Serv_2_ ua="na">Yes</Block_CID_Serv_2_>
<Block_ANC_Serv_2_ ua="na">Yes</Block_ANC_Serv_2_>
<Dist_Ring_Serv_2_ ua="na">Yes</Dist_Ring_Serv_2_>
<Cfwd_All_Serv_2_ ua="na">Yes</Cfwd_All_Serv_2_>
<Cfwd_Busy_Serv_2_ ua="na">Yes</Cfwd_Busy_Serv_2_>
<Cfwd_No_Ans_Serv_2_ ua="na">Yes</Cfwd_No_Ans_Serv_2_>
<Cfwd_Sel_Serv_2_ ua="na">Yes</Cfwd_Sel_Serv_2_>
<Cfwd_Last_Serv_2_ ua="na">Yes</Cfwd_Last_Serv_2_>
<Block_Last_Serv_2_ ua="na">Yes</Block_Last_Serv_2_>
<Accept_Last_Serv_2_ ua="na">Yes</Accept_Last_Serv_2_>
<DND_Serv_2_ ua="na">Yes</DND_Serv_2_>
<CID_Serv_2_ ua="na">Yes</CID_Serv_2_>
<CWCID_Serv_2_ ua="na">Yes</CWCID_Serv_2_>
<Call_Return_Serv_2_ ua="na">Yes</Call_Return_Serv_2_>
<Call_Redial_Serv_2_ ua="na">Yes</Call_Redial_Serv_2_>
<Call_Back_Serv_2_ ua="na">Yes</Call_Back_Serv_2_>
<Three_Way_Call_Serv_2_ ua="na">Yes</Three_Way_Call_Serv_2_>
<Three_Way_Conf_Serv_2_ ua="na">Yes</Three_Way_Conf_Serv_2_>
<Attn_Transfer_Serv_2_ ua="na">Yes</Attn_Transfer_Serv_2_>
<Unattn_Transfer_Serv_2_ ua="na">Yes</Unattn_Transfer_Serv_2_>
<MWI_Serv_2_ ua="na">Yes</MWI_Serv_2_>
<VMWI_Serv_2_ ua="na">Yes</VMWI_Serv_2_>
<Speed_Dial_Serv_2_ ua="na">Yes</Speed_Dial_Serv_2_>
<Secure_Call_Serv_2_ ua="na">Yes</Secure_Call_Serv_2_>
<Referral_Serv_2_ ua="na">Yes</Referral_Serv_2_>
<Feature_Dial_Serv_2_ ua="na">Yes</Feature_Dial_Serv_2_>
<Service_Announcement_Serv_2_ ua="na">No</Service_Announcement_Serv_2_>
<Reuse_CID_Number_As_Name_2_ ua="na">Yes</Reuse_CID_Number_As_Name_2_>
<CONFCID_Serv_2_ ua="na">Yes</CONFCID_Serv_2_>

<!--AudioConfiguration-->
<Preferred_Codec_2_ ua="na">G711u</Preferred_Codec_2_>
<Second_Preferred_Codec_2_ ua="na">Unspecified</Second_Preferred_Codec_2_>
<Third_Preferred_Codec_2_ ua="na">Unspecified</Third_Preferred_Codec_2_>
<Use_Pref_Codec_Only_2_ ua="na">Yes</Use_Pref_Codec_Only_2_>
<Codec_Negotiation_2_ ua="na">Default</Codec_Negotiation_2_>
<G729a_Enable_2_ ua="na">Yes</G729a_Enable_2_>
<Silence_Supp_Enable_2_ ua="na">No</Silence_Supp_Enable_2_>
<G726-32_Enable_2_ ua="na">Yes</G726-32_Enable_2_>
<Silence_Threshold_2_ ua="na">medium</Silence_Threshold_2_>
<FAX_V21_Detect_Enable_2_ ua="na">Yes</FAX_V21_Detect_Enable_2_> <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<Echo_Canc_Enable_2_ ua="na">Yes</Echo_Canc_Enable_2_> <!--Default: Yes, options: Yes/No, To enable the use of the echo canceller, select yes. Otherwise, select no-->
<FAX_CNG_Detect_Enable_2_ ua="na">Yes</FAX_CNG_Detect_Enable_2_> <!--Default: Yes, options: Yes/No, To enable detection of the fax Calling Tone (CNG), select yes. Otherwise, select no-->
<FAX_Passthru_Codec_2_ ua="na">G711u</FAX_Passthru_Codec_2_> <!--Default: G711u, options: G711u/G711a, Select the codec for fax passthrough, G711u or G711a-->
<FAX_Codec_Symmetric_2_ ua="na">Yes</FAX_Codec_Symmetric_2_> <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<DTMF_Process_INFO_2_ ua="na">Yes</DTMF_Process_INFO_2_> <!--Default: Yes, options: Yes/No, To enable detection of V21 fax tones, select yes. Otherwise, select no-->
<FAX_Passthru_Method_2_ ua="na">ReINVITE</FAX_Passthru_Method_2_> <!--Default: ReINVITE, Select the fax passthrough method options: None/NSE/ReINVITE-->
<DTMF_Process_AVT_2_ ua="na">Yes</DTMF_Process_AVT_2_> <!--Default: Yes, options: Yes/No, To use the DTMF process AVT feature, select yes. Otherwise, select no-->
<FAX_Process_NSE_2_ ua="na">Yes</FAX_Process_NSE_2_> <!--Default: Yes, options: Yes/No, To use the fax process NSE feature, select yes. Otherwise, select no-->
<DTMF_Tx_Method_2_ ua="na">Auto</DTMF_Tx_Method_2_> <!--Default: Auto, options: InBand/AVT/INFO/Auto, Select the method to transmit DTMF signals to the far end-->
<FAX_Disable_ECAN_2_ ua="na">No</FAX_Disable_ECAN_2_> <!--Default: No, options: Yes/No, If enabled, this feature automatically disables the echo canceller when a fax tone is detected-->
<DTMF_Tx_Mode_2_ ua="na">Strict</DTMF_Tx_Mode_2_> <!--Default: Strict, options: Normal/Strict, DTMF Detection Tx Mode is available for SIP information and AVT-->
<DTMF_Tx_Strict_Hold_Off_Time_2_ ua="na">70</DTMF_Tx_Strict_Hold_Off_Time_2_> <!--Default: 70, This parameter is in effect only when DTMF Tx Mode is set to strict, and when DTMF Tx Method is set to out-ofband; i.e. either AVT or SIP-INFO-->
<FAX_Enable_T38_2_ ua="na">Yes</FAX_Enable_T38_2_> <!--Default: Yes, options: Yes/No, To enable the use of ITU-T T.38 standard for FAX Relay, select yes.-->
<Hook_Flash_Tx_Method_2_ ua="na">None</Hook_Flash_Tx_Method_2_> <!--Default: None, options: None/AVT/INFO, The MIME type for this message body is taken from the Hook Flash MIME Type setting-->
<FAX_T38_Redundancy_2_ ua="na">1</FAX_T38_Redundancy_2_> <!--Default: 1, The higher the number, the larger the packet size and the more bandwidth consumed-->
<FAX_T38_ECM_Enable_2_ ua="na">Yes</FAX_T38_ECM_Enable_2_> <!--Default: Yes, options: Yes/No, Select yes to enable T.38 Error Correction Mode-->
<FAX_Tone_Detect_Mode_2_ ua="na">caller or callee</FAX_Tone_Detect_Mode_2_> <!--Default: caller or callee, options: caller or callee/caller only/callee only-->
<Symmetric_RTP_2_ ua="na">No</Symmetric_RTP_2_> <!--Default: No, options: Yes/No, Enable symmetric RTP operation. If enabled, the ATA sends RTP packets to the source address and port of the last received valid inbound RTP packet-->
<FAX_T38_Return_to_Voice_2_ ua="na">No</FAX_T38_Return_to_Voice_2_> <!--Default: No, options: Yes/No, When this feature is enabled, upon completion of the fax image transfer, the connection remains established and reverts to a voice call using the previously designated codec-->
<Modem_Line_2_ ua="na">No</Modem_Line_2_>
<RTP_to_Proxy_in_Remote_Hold_2_ ua="na">No</RTP_to_Proxy_in_Remote_Hold_2_>

<!--DialPlan-->
<Dial_Plan_2_ ua="na">{$spa_dial_plan}</Dial_Plan_2_>

<!--FXS PortPolarityConfiguration-->
<Idle_Polarity_2_ ua="na">Forward</Idle_Polarity_2_>
<Caller_Conn_Polarity_2_ ua="na">Forward</Caller_Conn_Polarity_2_>
<Callee_Conn_Polarity_2_ ua="na">Forward</Callee_Conn_Polarity_2_>
<Profile_Stamp_2_ ua="na"/>

<!--Parametersfor User1 Tab -->
<!--CallForwardSettings-->
<Cfwd_All_Dest_1_ ua="rw"/>
<Cfwd_Busy_Dest_1_ ua="rw"/>
<Cfwd_No_Ans_Dest_1_ ua="rw"/>
<Cfwd_No_Ans_Delay_1_ ua="rw">20</Cfwd_No_Ans_Delay_1_>

<!--SelectiveCallForwardSettings-->
<Cfwd_Sel1_Caller_1_ ua="rw"/>
<Cfwd_Sel1_Dest_1_ ua="rw"/>
<Cfwd_Sel2_Caller_1_ ua="rw"/>
<Cfwd_Sel2_Dest_1_ ua="rw"/>
<Cfwd_Sel3_Caller_1_ ua="rw"/>
<Cfwd_Sel3_Dest_1_ ua="rw"/>
<Cfwd_Sel4_Caller_1_ ua="rw"/>
<Cfwd_Sel4_Dest_1_ ua="rw"/>
<Cfwd_Sel5_Caller_1_ ua="rw"/>
<Cfwd_Sel5_Dest_1_ ua="rw"/>
<Cfwd_Sel6_Caller_1_ ua="rw"/>
<Cfwd_Sel6_Dest_1_ ua="rw"/>
<Cfwd_Sel7_Caller_1_ ua="rw"/>
<Cfwd_Sel7_Dest_1_ ua="rw"/>
<Cfwd_Sel8_Caller_1_ ua="rw"/>
<Cfwd_Sel8_Dest_1_ ua="rw"/>
<Cfwd_Last_Caller_1_ ua="rw"/>
<Cfwd_Last_Dest_1_ ua="rw"/>
<Block_Last_Caller_1_ ua="rw"/>
<Accept_Last_Caller_1_ ua="rw"/>

<!--SpeedDialSettings-->
<Speed_Dial_2_1_ ua="rw"/>
<Speed_Dial_3_1_ ua="rw"/>
<Speed_Dial_4_1_ ua="rw"/>
<Speed_Dial_5_1_ ua="rw"/>
<Speed_Dial_6_1_ ua="rw"/>
<Speed_Dial_7_1_ ua="rw"/>
<Speed_Dial_8_1_ ua="rw"/>
<Speed_Dial_9_1_ ua="rw"/>

<!--SupplementaryServiceSettings-->
<CW_Setting_1_ ua="rw">Yes</CW_Setting_1_>
<Block_CID_Setting_1_ ua="rw">No</Block_CID_Setting_1_>
<Block_ANC_Setting_1_ ua="rw">No</Block_ANC_Setting_1_>
<DND_Setting_1_ ua="rw">No</DND_Setting_1_>
<CID_Setting_1_ ua="rw">Yes</CID_Setting_1_>
<CWCID_Setting_1_ ua="rw">Yes</CWCID_Setting_1_>
<Dist_Ring_Setting_1_ ua="rw">Yes</Dist_Ring_Setting_1_>
<Secure_Call_Setting_1_ ua="na">No</Secure_Call_Setting_1_>
<Message_Waiting_1_ ua="rw">No</Message_Waiting_1_>
<Accept_Media_Loopback_Request_1_ ua="na">automatic</Accept_Media_Loopback_Request_1_>
<Media_Loopback_Mode_1_ ua="na">source</Media_Loopback_Mode_1_>
<Media_Loopback_Type_1_ ua="na">media</Media_Loopback_Type_1_>
<CONFCID_Setting_1_ ua="rw">Yes</CONFCID_Setting_1_>

<!--DistinctiveRingSettings-->
<Ring1_Caller_1_ ua="rw"/>
<Ring2_Caller_1_ ua="rw"/>
<Ring3_Caller_1_ ua="rw"/>
<Ring4_Caller_1_ ua="rw"/>
<Ring5_Caller_1_ ua="rw"/>
<Ring6_Caller_1_ ua="rw"/>
<Ring7_Caller_1_ ua="rw"/>
<Ring8_Caller_1_ ua="rw"/>

<!--RingSettings-->
<Default_Ring_1_ ua="rw">1</Default_Ring_1_>
<Default_CWT_1_ ua="rw">1</Default_CWT_1_>
<Hold_Reminder_Ring_1_ ua="rw">8</Hold_Reminder_Ring_1_>
<Call_Back_Ring_1_ ua="rw">7</Call_Back_Ring_1_>
<Cfwd_Ring_Splash_Len_1_ ua="rw">0</Cfwd_Ring_Splash_Len_1_>
<Cblk_Ring_Splash_Len_1_ ua="rw">0</Cblk_Ring_Splash_Len_1_>
<VMWI_Ring_Policy_1_ ua="na">New VM Available</VMWI_Ring_Policy_1_>
<VMWI_Ring_Splash_Len_1_ ua="rw">0</VMWI_Ring_Splash_Len_1_>
<Ring_On_No_New_VM_1_ ua="na">No</Ring_On_No_New_VM_1_>

<!--Parametersfor User2 Tab -->
<!--CallForwardSettings-->
<Cfwd_All_Dest_2_ ua="rw"/>
<Cfwd_Busy_Dest_2_ ua="rw"/>
<Cfwd_No_Ans_Dest_2_ ua="rw"/>
<Cfwd_No_Ans_Delay_2_ ua="rw">20</Cfwd_No_Ans_Delay_2_>

<!--SelectiveCallForwardSettings-->
<Cfwd_Sel1_Caller_2_ ua="rw"/>
<Cfwd_Sel1_Dest_2_ ua="rw"/>
<Cfwd_Sel2_Caller_2_ ua="rw"/>
<Cfwd_Sel2_Dest_2_ ua="rw"/>
<Cfwd_Sel3_Caller_2_ ua="rw"/>
<Cfwd_Sel3_Dest_2_ ua="rw"/>
<Cfwd_Sel4_Caller_2_ ua="rw"/>
<Cfwd_Sel4_Dest_2_ ua="rw"/>
<Cfwd_Sel5_Caller_2_ ua="rw"/>
<Cfwd_Sel5_Dest_2_ ua="rw"/>
<Cfwd_Sel6_Caller_2_ ua="rw"/>
<Cfwd_Sel6_Dest_2_ ua="rw"/>
<Cfwd_Sel7_Caller_2_ ua="rw"/>
<Cfwd_Sel7_Dest_2_ ua="rw"/>
<Cfwd_Sel8_Caller_2_ ua="rw"/>
<Cfwd_Sel8_Dest_2_ ua="rw"/>
<Cfwd_Last_Caller_2_ ua="rw"/>
<Cfwd_Last_Dest_2_ ua="rw"/>
<Block_Last_Caller_2_ ua="rw"/>
<Accept_Last_Caller_2_ ua="rw"/>

<!--SpeedDialSettings-->
<Speed_Dial_2_2_ ua="rw"/>
<Speed_Dial_3_2_ ua="rw"/>
<Speed_Dial_4_2_ ua="rw"/>
<Speed_Dial_5_2_ ua="rw"/>
<Speed_Dial_6_2_ ua="rw"/>
<Speed_Dial_7_2_ ua="rw"/>
<Speed_Dial_8_2_ ua="rw"/>
<Speed_Dial_9_2_ ua="rw"/>

<!--SupplementaryServiceSettings-->
<CW_Setting_2_ ua="rw">Yes</CW_Setting_2_>
<Block_CID_Setting_2_ ua="rw">No</Block_CID_Setting_2_>
<Block_ANC_Setting_2_ ua="rw">No</Block_ANC_Setting_2_>
<DND_Setting_2_ ua="rw">No</DND_Setting_2_>
<CID_Setting_2_ ua="rw">Yes</CID_Setting_2_>
<CWCID_Setting_2_ ua="rw">Yes</CWCID_Setting_2_>
<Dist_Ring_Setting_2_ ua="rw">Yes</Dist_Ring_Setting_2_>
<Secure_Call_Setting_2_ ua="na">No</Secure_Call_Setting_2_>
<Message_Waiting_2_ ua="rw">No</Message_Waiting_2_>
<Accept_Media_Loopback_Request_2_ ua="na">automatic</Accept_Media_Loopback_Request_2_>
<Media_Loopback_Mode_2_ ua="na">source</Media_Loopback_Mode_2_>
<Media_Loopback_Type_2_ ua="na">media</Media_Loopback_Type_2_>
<CONFCID_Setting_2_ ua="rw">Yes</CONFCID_Setting_2_>

<!--DistinctiveRingSettings-->
<Ring1_Caller_2_ ua="rw"/>
<Ring2_Caller_2_ ua="rw"/>
<Ring3_Caller_2_ ua="rw"/>
<Ring4_Caller_2_ ua="rw"/>
<Ring5_Caller_2_ ua="rw"/>
<Ring6_Caller_2_ ua="rw"/>
<Ring7_Caller_2_ ua="rw"/>
<Ring8_Caller_2_ ua="rw"/>

<!--RingSettings-->
<Default_Ring_2_ ua="rw">1</Default_Ring_2_>
<Default_CWT_2_ ua="rw">1</Default_CWT_2_>
<Hold_Reminder_Ring_2_ ua="rw">8</Hold_Reminder_Ring_2_>
<Call_Back_Ring_2_ ua="rw">7</Call_Back_Ring_2_>
<Cfwd_Ring_Splash_Len_2_ ua="rw">0</Cfwd_Ring_Splash_Len_2_>
<Cblk_Ring_Splash_Len_2_ ua="rw">0</Cblk_Ring_Splash_Len_2_>
<VMWI_Ring_Policy_2_ ua="na">New VM Available</VMWI_Ring_Policy_2_>
<VMWI_Ring_Splash_Len_2_ ua="rw">0</VMWI_Ring_Splash_Len_2_>
<Ring_On_No_New_VM_2_ ua="na">No</Ring_On_No_New_VM_2_>

<!--Parametersfor RegionalTab -->
<!--CallProgressTones-->
<Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Dial_Tone>
<Second_Dial_Tone ua="na">420@-19,520@-19;10(*/0/1+2)</Second_Dial_Tone>
<Outside_Dial_Tone ua="na">420@-16;10(*/0/1)</Outside_Dial_Tone>
<Prompt_Tone ua="na">520@-19,620@-19;10(*/0/1+2)</Prompt_Tone>
<Busy_Tone ua="na">480@-19,620@-19;10(.5/.5/1+2)</Busy_Tone>
<Reorder_Tone ua="na">480@-19,620@-19;10(.25/.25/1+2)</Reorder_Tone>
<Off_Hook_Warning_Tone ua="na">480@-10,620@0;10(.125/.125/1+2)</Off_Hook_Warning_Tone>
<Ring_Back_Tone ua="na">440@-19,480@-19;*(2/4/1+2)</Ring_Back_Tone>
<Ring_Back_2_Tone ua="na">440@-19,480@-19;*(1/1/1+2)</Ring_Back_2_Tone>
<Confirm_Tone ua="na">600@-16;1(.25/.25/1)</Confirm_Tone>
<SIT1_Tone ua="na">985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT1_Tone>
<SIT2_Tone ua="na">914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)</SIT2_Tone>
<SIT3_Tone ua="na">914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT3_Tone>
<SIT4_Tone ua="na">985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)</SIT4_Tone>
<MWI_Dial_Tone ua="na">350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)</MWI_Dial_Tone>
<Cfwd_Dial_Tone ua="na">350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)</Cfwd_Dial_Tone>
<Holding_Tone ua="na">600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)</Holding_Tone>
<Conference_Tone ua="na">350@-19;20(.1/.1/1,.1/9.7/1)</Conference_Tone>
<Secure_Call_Indication_Tone ua="na">397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)</Secure_Call_Indication_Tone>
<Feature_Invocation_Tone ua="na">350@-16;*(.1/.1/1)</Feature_Invocation_Tone>
<Call_Remind_Tone ua="na"/>

<!--DistinctiveRingPatterns-->
<Ring1_Cadence ua="na">60(2/4)</Ring1_Cadence>
<Ring2_Cadence ua="na">60(.8/.4,.8/4)</Ring2_Cadence>
<Ring3_Cadence ua="na">60(.4/.2,.4/.2,.8/4)</Ring3_Cadence>
<Ring4_Cadence ua="na">60(.3/.2,1/.2,.3/4)</Ring4_Cadence>
<Ring5_Cadence ua="na">1(.5/.5)</Ring5_Cadence>
<Ring6_Cadence ua="na">60(.2/.4,.2/.4,.2/4)</Ring6_Cadence>
<Ring7_Cadence ua="na">60(.4/.2,.4/.2,.4/4)</Ring7_Cadence>
<Ring8_Cadence ua="na">60(0.25/9.75)</Ring8_Cadence>

<!--DistinctiveCallWaitingTonePatterns-->
<CWT1_Cadence ua="na">*(.3/9.7)</CWT1_Cadence>
<CWT2_Cadence ua="na">30(.1/.1,.1/9.7)</CWT2_Cadence>
<CWT3_Cadence ua="na">30(.1/.1,.1/.1,.1/9.7)</CWT3_Cadence>
<CWT4_Cadence ua="na">30(.1/.1,.3/.1,.1/9.3)</CWT4_Cadence>
<CWT5_Cadence ua="na">1(.5/.5)</CWT5_Cadence>
<CWT6_Cadence ua="na">30(.1/.1,.3/.2,.3/9.1)</CWT6_Cadence>
<CWT7_Cadence ua="na">30(.3/.1,.3/.1,.1/9.1)</CWT7_Cadence>
<CWT8_Cadence ua="na">2.3(.3/2)</CWT8_Cadence>

<!--DistinctiveRing/CWTPatternNames-->
<Ring1_Name ua="na">Bellcore-r1</Ring1_Name>
<Ring2_Name ua="na">Bellcore-r2</Ring2_Name>
<Ring3_Name ua="na">Bellcore-r3</Ring3_Name>
<Ring4_Name ua="na">Bellcore-r4</Ring4_Name>
<Ring5_Name ua="na">Bellcore-r5</Ring5_Name>
<Ring6_Name ua="na">Bellcore-r6</Ring6_Name>
<Ring7_Name ua="na">Bellcore-r7</Ring7_Name>
<Ring8_Name ua="na">Bellcore-r8</Ring8_Name>

<!--Ringand CallWaitingToneSpec-->
<Ring_Waveform ua="na">Trapezoid</Ring_Waveform>
<Ring_Frequency ua="na">20</Ring_Frequency>
<Ring_Voltage ua="na">85</Ring_Voltage>
<CWT_Frequency ua="na">440@-10</CWT_Frequency>
<Synchronized_Ring ua="na">No</Synchronized_Ring>

<!--ControlTimerValues(sec)-->
<Hook_Flash_Timer_Min ua="na">.1</Hook_Flash_Timer_Min>
<Hook_Flash_Timer_Max ua="na">.9</Hook_Flash_Timer_Max>
<Callee_On_Hook_Delay ua="na">0</Callee_On_Hook_Delay>
<Reorder_Delay ua="na">5</Reorder_Delay>
<Call_Back_Expires ua="na">1800</Call_Back_Expires>
<Call_Back_Retry_Intvl ua="na">30</Call_Back_Retry_Intvl>
<Call_Back_Delay ua="na">.5</Call_Back_Delay>
<VMWI_Refresh_Intvl ua="na">0</VMWI_Refresh_Intvl>
<Interdigit_Long_Timer ua="na">10</Interdigit_Long_Timer>
<Interdigit_Short_Timer ua="na">3</Interdigit_Short_Timer>
<CPC_Delay ua="na">2</CPC_Delay>
<CPC_Duration ua="na">.5</CPC_Duration>

<!--VerticalServiceActivationCodes-->
<Call_Return_Code ua="na">*69</Call_Return_Code>
<Call_Redial_Code ua="na">*07</Call_Redial_Code>
<Blind_Transfer_Code ua="na">*98</Blind_Transfer_Code>
<Call_Back_Act_Code ua="na">*66</Call_Back_Act_Code>
<Call_Back_Deact_Code ua="na">*86</Call_Back_Deact_Code>
<Call_Back_Busy_Act_Code ua="na">*05</Call_Back_Busy_Act_Code>
<Cfwd_All_Act_Code ua="na">*72</Cfwd_All_Act_Code>
<Cfwd_All_Deact_Code ua="na">*73</Cfwd_All_Deact_Code>
<Cfwd_Busy_Act_Code ua="na">*90</Cfwd_Busy_Act_Code>
<Cfwd_Busy_Deact_Code ua="na">*91</Cfwd_Busy_Deact_Code>
<Cfwd_No_Ans_Act_Code ua="na">*92</Cfwd_No_Ans_Act_Code>
<Cfwd_No_Ans_Deact_Code ua="na">*93</Cfwd_No_Ans_Deact_Code>
<Cfwd_Last_Act_Code ua="na">*63</Cfwd_Last_Act_Code>
<Cfwd_Last_Deact_Code ua="na">*83</Cfwd_Last_Deact_Code>
<Block_Last_Act_Code ua="na">*60</Block_Last_Act_Code>
<Block_Last_Deact_Code ua="na">*80</Block_Last_Deact_Code>
<Accept_Last_Act_Code ua="na">*64</Accept_Last_Act_Code>
<Accept_Last_Deact_Code ua="na">*84</Accept_Last_Deact_Code>
<CW_Act_Code ua="na">*56</CW_Act_Code>
<CW_Deact_Code ua="na">*57</CW_Deact_Code>
<CW_Per_Call_Act_Code ua="na">*71</CW_Per_Call_Act_Code>
<CW_Per_Call_Deact_Code ua="na">*70</CW_Per_Call_Deact_Code>
<Block_CID_Act_Code ua="na">*67</Block_CID_Act_Code>
<Block_CID_Deact_Code ua="na">*68</Block_CID_Deact_Code>
<Block_CID_Per_Call_Act_Code ua="na">*81</Block_CID_Per_Call_Act_Code>
<Block_CID_Per_Call_Deact_Code ua="na">*82</Block_CID_Per_Call_Deact_Code>
<Block_ANC_Act_Code ua="na">*77</Block_ANC_Act_Code>
<Block_ANC_Deact_Code ua="na">*87</Block_ANC_Deact_Code>
<DND_Act_Code ua="na">*78</DND_Act_Code>
<DND_Deact_Code ua="na">*79</DND_Deact_Code>
<CID_Act_Code ua="na">*65</CID_Act_Code>
<CID_Deact_Code ua="na">*85</CID_Deact_Code>
<CWCID_Act_Code ua="na">*25</CWCID_Act_Code>
<CWCID_Deact_Code ua="na">*45</CWCID_Deact_Code>
<Dist_Ring_Act_Code ua="na">*26</Dist_Ring_Act_Code>
<Dist_Ring_Deact_Code ua="na">*46</Dist_Ring_Deact_Code>
<Speed_Dial_Act_Code ua="na">*74</Speed_Dial_Act_Code>
<Paging_Code ua="na">*96</Paging_Code>
<Secure_All_Call_Act_Code ua="na">*16</Secure_All_Call_Act_Code>
<Secure_No_Call_Act_Code ua="na">*17</Secure_No_Call_Act_Code>
<Secure_One_Call_Act_Code ua="na">*18</Secure_One_Call_Act_Code>
<Secure_One_Call_Deact_Code ua="na">*19</Secure_One_Call_Deact_Code>
<Conference_Act_Code ua="na"/>
<Attn-Xfer_Act_Code ua="na"/>
<Modem_Line_Toggle_Code ua="na">*99</Modem_Line_Toggle_Code>
<FAX_Line_Toggle_Code ua="na">#99</FAX_Line_Toggle_Code>
<Media_Loopback_Code ua="na">*03</Media_Loopback_Code>
<Referral_Services_Codes ua="na"/>
<Feature_Dial_Services_Codes ua="na"/>

<!--VerticalServiceAnnouncementCodes-->
<Service_Annc_Base_Number ua="na"/>
<Service_Annc_Extension_Codes ua="na"/>

<!--OutboundCallCodecSelectionCodes-->
<Prefer_G711u_Code ua="na">*017110</Prefer_G711u_Code>
<Force_G711u_Code ua="na">*027110</Force_G711u_Code>
<Prefer_G711a_Code ua="na">*017111</Prefer_G711a_Code>
<Force_G711a_Code ua="na">*027111</Force_G711a_Code>
<Prefer_G726r32_Code ua="na">*0172632</Prefer_G726r32_Code>
<Force_G726r32_Code ua="na">*0272632</Force_G726r32_Code>
<Prefer_G729a_Code ua="na">*01729</Prefer_G729a_Code>
<Force_G729a_Code ua="na">*02729</Force_G729a_Code>

<!--Miscellaneous-->
<FXS_Port_Impedance ua="na">600</FXS_Port_Impedance>
<FXS_Port_Input_Gain ua="na">-3</FXS_Port_Input_Gain>
<FXS_Port_Output_Gain ua="na">-3</FXS_Port_Output_Gain>
<DTMF_Playback_Level ua="na">-16</DTMF_Playback_Level>
<DTMF_Twist ua="na">2</DTMF_Twist>
<DTMF_Playback_Length ua="na">.1</DTMF_Playback_Length>
<Detect_ABCD ua="na">Yes</Detect_ABCD>
<Playback_ABCD ua="na">Yes</Playback_ABCD>
<Caller_ID_Method ua="na">Bellcore(N.Amer,China)</Caller_ID_Method>
<Caller_ID_FSK_Standard ua="na">bell 202</Caller_ID_FSK_Standard>
<Feature_Invocation_Method ua="na">Default</Feature_Invocation_Method>

<!--DMZ Settings-->
<!--MiscellaneousSettings-->
<!--SystemReservedPortsRange-->
<Protect_IVR_FactoryReset ua="na">No</Protect_IVR_FactoryReset>
<Max_Session ua="na">2</Max_Session>
<router-configuration>
<WAN_Basic_Setting>
<WAN_Stack_Mode>0</WAN_Stack_Mode> <!--options: 0:IPv4Only, 1:IPv6Only, 2:Dual-->
<WAN_Signal_Preference>0</WAN_Signal_Preference> <!--options: 0:IPv4, 1:IPv6-->
<WAN_Media_Preference>0</WAN_Media_Preference> <!--options: 0:IPv4, 1:IPv6-->
</WAN_Basic_Setting>
<WAN_Interface>
<WAN_Connection_Type>dh</WAN_Connection_Type> <!--options: dh/st/pp-->
<WAN_DHCP_MTU_Mode>0</WAN_DHCP_MTU_Mode>
<WAN_DHCP_MTU_Size>0</WAN_DHCP_MTU_Size>
<WAN_Static_IP_NET>0.0.0.0:0.0.0.0:0.0.0.0</WAN_Static_IP_NET>
<WAN_Static_MTU_Mode>0</WAN_Static_MTU_Mode>
<WAN_Static_MTU_Size>0</WAN_Static_MTU_Size>
<WAN_PPPoE_User_Name/>
<!--<WAN_PPPoE_Password></WAN_PPPoE_Password>-->
<WAN_PPPoE_Service_Name/>
<WAN_PPPoE_Keep_Alive>0:5:30</WAN_PPPoE_Keep_Alive>
<WAN_PPPoE_MTU_Mode>0</WAN_PPPoE_MTU_Mode>
<WAN_PPPoE_MTU_Size>0</WAN_PPPoE_MTU_Size>
</WAN_Interface>
<WAN_IP6_Setting>
<WAN_IP6_Allow_AutoConfig>1</WAN_IP6_Allow_AutoConfig>
<WAN_IP6_Connection_Type>0</WAN_IP6_Connection_Type> <!--options: 0:DHCPv6, 1:Static, 2:PPPoEv6-->
<WAN_Static_IP6_Address/>
<WAN_Static_IP6_Prefix_Length>64</WAN_Static_IP6_Prefix_Length>
<WAN_Static_IP6_Gatway/>
</WAN_IP6_Setting>
<PHY_Port_Setting>
<Flow_Control>1</Flow_Control>
<Speed_Duplex>auto</Speed_Duplex> <!--options: auto/10h/10f/100h/100f-->
</PHY_Port_Setting>
<MAC_Address_Clone>
<MAC_Address_Clone_Enabled>0</MAC_Address_Clone_Enabled>
<MAC_Address_Clone_Address/>
</MAC_Address_Clone>
<Internet_Option>
<Host_Name>ATA192-MPP</Host_Name>
<Domain_Name/>
<DNS_Order>2</DNS_Order> <!--options: 0:Manual, 1:Manual-DHCP, 2:DHCP-Manual-->
<DNS/>
<DNS6_Order>2</DNS6_Order> <!--options: 0:Manual, 1:Manual-DHCP, 2:DHCP-Manual-->
<DNS6/>
</Internet_Option>
<DHCP_Server_Pool>
<Rule>
<DHCP_Server>1</DHCP_Server>
<Local_IP>192.168.15.1</Local_IP>
<Subnet_Mask>255.255.255.0</Subnet_Mask> <!--options:255.255.255.0/128/192/224/240/248/252-->
<DHCP_Client_Table/>
<Option_66>0</Option_66> <!--options: 0:None, 2:RemoteTFTPServer, 3:ManualTFTPServer-->
<TFTP_IP>0.0.0.0</TFTP_IP>
<Option_67/>
<Option_159/>
<Option_160/>
<DNS_Proxy>1</DNS_Proxy> <!--options: 0:Disabled, 1:Enabled-->
<Starting_IP>192.168.15.100</Starting_IP>
<Max_DHCP_User>50</Max_DHCP_User>
<Client_Lease_Time>0</Client_Lease_Time>
<Static_DNS>8.8.4.4</Static_DNS>
<Default_Gateway>192.168.15.1</Default_Gateway>
</Rule>
</DHCP_Server_Pool>
<LAN_IP6_Setting>
<LAN_IP6_Address_Assign_Type>0</LAN_IP6_Address_Assign_Type> <!--options: 0:SLAAC, 1:DHCPV6-->
<LAN_DHCP6_Delegation_Enable>0</LAN_DHCP6_Delegation_Enable>
<LAN_IP6_Prefix>2001::</LAN_IP6_Prefix>
</LAN_IP6_Setting>
<WAN_VLAN_Setting>
<WAN_VLAN_Enable>0</WAN_VLAN_Enable> <!--options: 0:Disabled, 1:Enabled-->
<WAN_VLAN_ID>3</WAN_VLAN_ID> <!--options: 1~4094-->
</WAN_VLAN_Setting>
<CLDP_Setting>
<CDP_ENABLE>1</CDP_ENABLE> <!--options: 0:Disabled, 1:Enabled-->
<LLDP_ENABLE>1</LLDP_ENABLE> <!--options: 0:Disabled, 1:Enabled-->
<LAYER2_LOGGING_ENABLE>0</LAYER2_LOGGING_ENABLE> <!--options: 0:Disabled, 1:Enabled-->
</CLDP_Setting>
<Single_Port_Forwarding>
<Single_Port_Forwarding_Index/>
</Single_Port_Forwarding>
<Port_Range_Forwarding>
<Port_Range_Forwarding_Index/>
</Port_Range_Forwarding>
<SNMP>
<SNMP_Enabled>0</SNMP_Enabled>
<SNMP_Trusted_IP>0.0.0.0/0.0.0.0</SNMP_Trusted_IP>
<SNMP_Trusted_IP6>::</SNMP_Trusted_IP6>
<SNMP_Trusted_IP6_Prefix_Length>0</SNMP_Trusted_IP6_Prefix_Length>
<Get_Community>public</Get_Community>
<Set_Community>private</Set_Community>
<SNMPV3>0</SNMPV3>
<RW_User>v3rwuser</RW_User>
<Auth_Protocol>MD5</Auth_Protocol> <!--options: MD5/SHA-->
<!--<Auth_Password></Auth_Password>-->
<Privacy_Protocol>DES</Privacy_Protocol> <!--options: None/DES/AES-->
<!--<Privacy_Password></Privacy_Password>-->
<TRAP_IP_Address>192.168.15.100</TRAP_IP_Address>
<TRAP_Port>162</TRAP_Port>
<TRAP_SNMP_Version>v1</TRAP_SNMP_Version> <!--options: v1/v2c/v3-->
</SNMP>
<Time_Setup>
<Time_Zone>{$spa_time_zone}</Time_Zone>
<Auto_Adjust_Clock>1</Auto_Adjust_Clock>
<Time_Server_Mode>auto</Time_Server_Mode> <!--options: auto/manual-->
<Time_Server>0.ca.pool.ntp.org</Time_Server>
<Resync_Timer>3600</Resync_Timer>
<Auto_Recovery_System_Time>0</Auto_Recovery_System_Time>
<Time_Mode>1</Time_Mode> <!--options: 0:Manual, 1:Auto-->
</Time_Setup>
<QoS_Bandwidth_Control/>
<Software_DMZ>
<Rule1>
<Status>0</Status>
<Private_IP>0.0.0.0</Private_IP>
</Rule1>
<Rule_Number>1</Rule_Number>
</Software_DMZ>
<Bonjour_Enable>1</Bonjour_Enable>
<Reset_Button_Enable>1</Reset_Button_Enable>
<Router_Mode>1</Router_Mode> <!--options: 0:Bridge, 1:NAT-->
<Monitor_WAN_Port_Only>0</Monitor_WAN_Port_Only>
<VPN_Passthrough>
<IPSec_Passthrough>1</IPSec_Passthrough>
<PPTP_Passthrough>1</PPTP_Passthrough>
<L2TP_Passthrough>1</L2TP_Passthrough>
</VPN_Passthrough>
<Web_Management>
<Admin_Access>1</Admin_Access>
<Web_Utility_Access_HTTP>1</Web_Utility_Access_HTTP>
<Web_Utility_Access_HTTPS>0</Web_Utility_Access_HTTPS>
<Web_Remote_Management>0</Web_Remote_Management>
<Remote_Web_Utility_Access>0</Remote_Web_Utility_Access>
<Web_Remote_Upgrade>0</Web_Remote_Upgrade>
<Allowed_Remote_IP_Type>1</Allowed_Remote_IP_Type>
<Allowed_Remote_IP_Address>0.0.0.0</Allowed_Remote_IP_Address>
<Remote_Management_Port>80</Remote_Management_Port>
</Web_Management>
<TR_069>
<TR_069_Status>0</TR_069_Status>
<TR_069_ACS_URL/>
<TR_069_ACS_Username/> 
<!--<TR_069_ACS_Password></TR_069_ACS_Password>-->
<TR_069_Connection_Request_URL/>
<TR_069_Connection_Request_Username/> 
<!--<TR_069_Connection_Request_Password></TR_069_Connection_Request_Password>-->
<TR_069_Periodic_Inform_Interval>86400</TR_069_Periodic_Inform_Interval>
<TR_069_Periodic_Inform_Enable>1</TR_069_Periodic_Inform_Enable>
<TR_069_Loopback_Binding>0</TR_069_Loopback_Binding>
</TR_069>
<Log_Configuration>
<Log_Module>0</Log_Module> <!--options: 0:Default, 1:Preset, 2:Telephony, 3:SIP, 4:UI, 5:Network, 6:Media, 7:System, 8:Web, 9:NTP, 10:CDP/LLDP, 11:Security-->
<RAM_Log_Size>200</RAM_Log_Size>
<Syslog_Server_IP></Syslog_Server_IP> <!--options: null, IPv4 address of debug log server-->
<Syslog_Server_IP6/>
<Syslog_Server_Port>514</Syslog_Server_Port>
<Event_Log_Server></Event_Log_Server> <!--options: null, Address of event log server, supports IPv4, IPv6, and FQDN-->
<Event_Log_Port>514</Event_Log_Port>
<Event_Log_Flag>15</Event_Log_Flag> <!--options: 0:Disable, 1:DEV, 2:SYS, 4:CFG ,8:REG, Default:15(DEV+SYS+CFG+REG)-->
<PRT_Upload_Url/>
<PRT_Upload_Method>0</PRT_Upload_Method> <!--options: 0:POST, 1:PUT-->
<PRT_Max_Timer>0</PRT_Max_Timer>
</Log_Configuration>
<Web_Login_Admin_Name>admin</Web_Login_Admin_Name> 
<!--<Web_Login_Admin_Password>Un1ty2580!</Web_Login_Admin_Password>--> <!--Set device admin password--> 
<Web_Login_Guest_Name>cisco</Web_Login_Guest_Name>
<!--<Web_Login_Guest_Password>MyCisco</Web_Login_Guest_Password>--> <!--Set device user password--> 
<SSH>
<SSH_ACCESS>0</SSH_ACCESS> <!--options: 0:Disabled, 1:Enabled-->
<SSH_User_ID/> <!--options: 0~50-->
<!--<SSH_Password></SSH_Password>-->
</SSH>
</router-configuration>
</flat-profile>