fusionpbx/resources/templates/provision/grandstream/gxp110x/{$mac}.xml

<?xml version="1.0" encoding="utf-8"?>
<gs_provision version="1">
  <config version="1">
<!-- Configuration Template For GXP110x Firmware Version 1.0.5.26 -->

<!-- Change Log -->

<!-- P values added since 1.0.5.23 -->
<!-- Enable Idle Mute. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1565 = 0 -->

<!-- Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1684 = 1 -->

<!-- Blink message LED on ringing. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1696 = 0 -->


<!-- P values' default value changed since 1.0.5.15  -->
<!-- Periodic Inform Interval -->
<!-- Number -->
<!-- P4507 = 86400 -->

<!-- Connection Request Port -->
<!-- Number -->
<!-- P4518 = 0 -->

<!-- Max Unsaved Log, 0-500, default is 200 -->
<!-- Number: 0-500 -->
<!-- Mandatory -->
<!-- P1434 = 4 -->


<!-- P values added since 1.0.4.23  -->
<!-- Music On Hold URI -->
<!-- P2350 = -->

<!-- Authenticate Incoming INVITE -->
<!-- P2346 = 0 -->

<!-- HTTP Proxy -->
<!-- String -->
<!-- P1552 = -->

<!-- HTTPS Proxy -->
<!-- String -->
<!-- P1553 = -->

<!-- Enable FLASH Key as CONF. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1390 = 0 -->

<!-- Click-To-Dial Feature. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1561 = 0 -->

<!-- Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<!-- P1555 = 0 -->

<!-- Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2347 = 0 -->

<!-- Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<!-- P2324 = 0 -->

<!-- Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2341 = 0 -->

<!-- Hoteling Event. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2342 = 0 -->

<!-- Call Center Status. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2343 = 0 -->

<!-- PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2340 = 0 -->

<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!-- Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P2348 = 0 -->


<!-- P values deleted from 1.0.4.23 -->
<!-- China Telecom Mode. 0 - No. 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1386 =0 -->


<!-- P values option updated since 1.0.4.23 -->
<!-- Option 12 added for P323, P324, P325, P326 -->
<!-- Key Mode. -->
<!-- 0 - Speed Dial -->
<!-- 5 - DialDTMF -->
<!-- 6 - Voicemail -->
<!-- 7 - CallReturn -->
<!-- 8 - Transfer -->
<!-- 10 - Intercom -->
<!-- 12 - 3-way Conference -->
<!-- Number: 0, 5, 6, 7, 8, 10, 12 -->
<!-- Mandatory -->
<!-- P323 = 0 -->
<!-- P324 =0 -->
<!-- P325 = 0 -->
<!-- P326 = 0 -->

<!--Change Log End  -->



<!-- Account Settings  -->

<!-- Account 1 -->

<!-- Account 1/General Settings -->

<!-- Account Active. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P271>1</P271>

<!-- Account Name -->
<!-- String -->
<!-- P270 = -->

<!-- SIP Server -->
<!-- String -->
<P47></P47>

<!-- Secondary SIP Server -->
<!-- String -->
<P2312></P2312>

<!-- Outbound Proxy -->
<!-- String -->
<P48></P48>

<!-- SIP User ID -->
<!-- String -->
<P35></P35>

<!-- Authenticate ID -->
<!-- String -->
<P36></P36>

<!-- Authenticate Password -->
<!-- String -->
<P34></P34>

<!-- Display Name -->
<!-- String -->
<P3></P3>

<!-- Voice Mail UserID -->
<!-- String -->
<P33></P33>


<!-- Account 1/Network Settings -->

<!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P103>0</P103>

<!-- Primary IP. Maximum 15 characters -->
<!-- String -->
<P2308></P2308>

<!-- Backup IP 1 -->
<!-- String -->
<P2309></P2309>

<!-- Backup IP 2 -->
<!-- String -->
<P2310></P2310>

<!-- NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0. -->
<!-- Number: 0, 1, 2, 3, 4, 5 -->
<!-- Mandatory -->
<P52>0</P52>

<!-- Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters -->
<!-- String -->
<P197></P197>

<!-- Account 1/SIP Settings/Basic Settings -->

<!-- TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P63>0</P63>

<!-- SIP Registration. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P31>1</P31>

<!-- Unregister On Reboot. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P81>0</P81>

<!-- Register Expiration (in minutes). Default is 60. Max about 45 days -->
<!-- Number: 1 - 64800 -->
<!-- Mandatory -->
<P32>{$account.1.register_expires}</P32>

<!-- Reregister Before Expiration (in seconds). Default is 0 second -->
<!-- Number: 0 - 64800 -->
<!-- Mandatory -->
<P2330>0</P2330>

<!-- Local SIP Port. Default is 5060 -->
<!-- Number -->
<!-- Mandatory -->
<P40>5060</P40>

<!-- SIP Registration Failure Retry Wait Time (in seconds). Default is 20 -->
<!-- Number: 1 - 3600 -->
<!-- Mandatory -->
<P138>20</P138>

<!-- SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) -->
<!-- 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 -->
<!-- Number: 50, 100, 200 -->
<!-- Mandatory -->
<P209>50</P209>

<!-- SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses -->
<!-- 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 -->
<!-- Number: 200, 400, 800 -->
<!-- Mandatory -->
<P250>400</P250>

<!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P130>0</P130>

<!-- SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2329>1</P2329>

<!-- Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2331>0</P2331>

<!-- Remove OBP from Route. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2305>0</P2305>

<!-- Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P288>1</P288>

<!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P99>0</P99>

<!-- SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2319>0</P2319>

<!-- Enable 100rel. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P272>0</P272>

<!-- Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2324>0</P2324>

<!-- Use Privacy Header -->
<!-- 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2338>0</P2338>

<!-- Use P-Preferred-Identity Header -->
<!-- 0 - Default, 1 - No, 2 - Yes. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2339>0</P2339>


<!-- Account 1/SIP Settings/Advanced Features -->

<!-- Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2341>0</P2341>

<!-- Hoteling Event. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2342>0</P2342>

<!-- Call Center Status. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2343>0</P2343>

<!-- PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2340>0</P2340>

<!-- Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2325>0</P2325>

<!-- Line-Seize Timeout (in seconds). Default is 15 -->
<!-- Number: 15 - 60 -->
<!-- Mandatory -->
<P2313>15</P2313>

<!-- Eventlist BLF URI -->
<!-- String -->
<P134></P134>

<!-- Conference URI -->
<!-- String -->
<P2318>{if $nway_conference == 'true'}nway{$account.1.user_id}@{$account.1.server_address}{/if}</P2318>

<!-- Music On Hold URI -->
<!-- String -->
<P2350></P2350>

<!-- BLF Call-pickup Prefix. Default is ** -->
<!-- String -->
<!-- Mandatory -->
<P1347>**</P1347>

<!-- PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P188>0</P188>

<!-- Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS -->
<!-- Default is 100 -->
<!-- Number: 100, 101, 102, 108, 109, 110, 117 -->
<!-- Mandatory -->
<P198>100</P198>


<!-- Account 1/SIP Settings/Session Timer -->

<!-- Session Expiration (in seconds). Default is 180 -->
<!-- Number: 90 - 64800 -->
<!-- Mandatory -->
<P260>180</P260>

<!-- Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 -->
<!-- Number: 90 - 64800 -->
<!-- Mandatory -->
<P261>90</P261>

<!-- Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P262>0</P262>

<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) -->
<!-- 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P263>0</P263>

<!-- Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P264>0</P264>

<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P266>0</P266>

<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 -->
<!-- Number: 1, 2 -->
<!-- Mandatory -->
<P267>1</P267>

<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). -->
<!-- 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P265>0</P265>


<!-- Account 1/SIP Settings/Security Settings -->

<!-- Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 -->
<!-- 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2311>0</P2311>

<!-- Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2306>0</P2306>

<!-- Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P258>0</P258>

<!-- Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2346>0</P2346>

<!-- Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2346>0</P2346>


<!-- Account 1/Audio Settings -->

<!-- Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2346>0</P2346>

<!-- Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2346>1</P2346>

<!-- Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2346>0</P2346>

<!-- DTMF Payload Type. Default is 101 -->
<!-- Number: 96 - 127 -->
<!-- Mandatory -->
<P79>101</P79>

<!-- Preferred Vocoder -->
<!-- 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC -->
<!-- choice 1. Default is 0 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P57>0</P57>

<!-- choice 2. Default is 8 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P58>8</P58>

<!-- choice 3. Default is 4 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P59>4</P59>

<!-- choice 4. Default is 18 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P60>18</P60>

<!-- choice 5. Default is 9 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P61>9</P61>

<!-- choice 6. Default is 98 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P62>98</P62>

<!-- choice 7. Default is 2 -->
<!-- Number: 0, 2, 4, 8, 9, 18, 98 -->
<!-- Mandatory -->
<P46>2</P46>

<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2348>0</P2348>

<!-- SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P183>0</P183>

<!-- Symmetric RTP. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P291>0</P291>

<!-- Silence Suppression. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P50>0</P50>

<!-- Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 -->
<!-- Number: 1 - 64 -->
<!-- Mandatory -->
<P37>2</P37>

<!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P49>1</P49>

<!-- G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2323>0</P2323>

<!-- iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P97>1</P97>

<!-- iLBC payload type. Default is 97 -->
<!-- Number: 96 - 127 -->
<!-- Mandatory -->
<P96>97</P96>

<!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P133>1</P133>

<!-- Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms -->
<!-- Default is 2 -->
<!-- Number: 0, 1, 2, 3, 4, 5, 6, 7 -->
<!-- Mandatory -->
<P132>2</P132>


<!-- Account 1/Call Settings -->

<!-- Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P29>0</P29>

<!-- Dial Plan Prefix -->
<!-- String  -->
<P66></P66>

<!-- Dial Plan. Default is { x+ | *x+ | *xx*x+ } -->
<!-- String -->
<!-- Mandatory -->
    
{if isset($grandstream_dial_plan) }
<P290>{$grandstream_dial_plan}</P290>
{else}
<P290>{literal}{x+|*x+|*++|\p\a\r\k\+*x+|\p\a\r\k\+x+|\f\l\o\w\+*x+}{/literal}</P290>
{/if}
    
<!-- Delayed Call Forward Wait Time (in seconds). Default is 20 -->
<!-- Number: 1 - 120 -->
<!-- Mandatory -->
<P139>20</P139>

<!-- Enable Call Features.  0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P191>1</P191>

<!-- Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P182>0</P182>

<!-- Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P104>0</P104>

<!-- Matching Incoming Caller ID. Matching Rule 1 -->
<!-- String -->
<P1488>{$grandstream_distinctive_ringtone_name_1}</P1488>

<!-- Matching Rule 1 Distinctive Ringtone -->
<!-- 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0. -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P1489>{$grandstream_distinctive_ringtone_1}</P1489>

<!-- Matching Incoming Caller ID. Matching Rule 2 -->
<!-- String -->
<P1490>{$grandstream_distinctive_ringtone_name_2}</P1490>

<!-- Matching Rule 2 Distinctive Ringtone -->
<!-- 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P1491>{$grandstream_distinctive_ringtone_2}</P1491>

<!-- Matching Incoming Caller ID. Matching Rule 3 -->
<!-- String -->
<P1492>{$grandstream_distinctive_ringtone_name_3}</P1492>

<!-- Matching Rule 3 Distinctive Ringtone -->
<!-- 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P1493>{$grandstream_distinctive_ringtone_3}</P1493>

<!-- Ring Timeout (in seconds). Default is 60 -->
<!-- Number: 30 - 3600 -->
<!-- Mandatory -->
<P1328>60</P1328>

<!-- Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P65>0</P65>

<!-- Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P129>0</P129>

<!-- Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P298>0</P298>

<!-- Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P135>0</P135>

<!-- Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2304>0</P2304>

<!-- No Key Entry Timeout (in seconds). Default is 4 -->
<!-- Number: 1 - 15 -->
<!-- Mandatory -->
<P85>4</P85>

<!-- Use as Dial Key. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P72>1</P72>



<!--Network/Basic Settings -->

<!-- Internet Protocol. 0 - Prefer IPv4, 1 - Prefer IPv6. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
{if isset($grandstream_ipv_mode)}<P1415>{$grandstream_ipv_mode}</P1415>{else}<P1415>0</P1415>{/if}

<!-- IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P8>0</P8>


<!-- DHCP -->

<!-- Host name, DHCP option 12. Max length allowed is 64 characters -->
<!-- String -->
<P146></P146>

<!-- Vendor Class ID, DHCP option 60. Max length allowed is 64 characters -->
<!-- Default value for GXP1100 - Grandstream GXP1100 -->
<!-- Default value for GXP1105 - Grandstream GXP1105 -->
<!-- String -->
<!-- P148 =  Grandstream GXP -->


<!-- PPPoE -->

<!-- PPPoE Account ID -->
<!-- String -->
<P82></P82>

<!-- PPPoE Password -->
<!-- String -->
<!-- Cannot contain ` or " -->
<P83></P83>

<!-- PPPoE Service Name -->
<!-- String -->
<P269></P269>


<!-- Statically Configured -->

<!-- IP Address. Ignore if DHCP or PPPoE is used -->
<!-- Number: 0 - 255 -->
<P9>192</P9>

<!-- Number: 0 - 255 -->
<P10>168</P10>

<!-- Number: 0 - 255 -->
<P11>0</P11>

<!-- Number: 0 - 255 -->
<P12>160</P12>

<!-- Subnet mask. Ignore if DHCP or PPPoE is used -->
<!-- Number: 0 - 255 -->
<P13>255</P13>

<!-- Number: 0 - 255 -->
<P14>255</P14>

<!-- Number: 0 - 255 -->
<P15>0</P15>

<!-- Number: 0 - 255 -->
<P16>0</P16>

<!-- Gateway. Ignore if DHCP or PPPoE is used -->
<!-- Number: 0 - 255 -->
<P17>0</P17>

<!-- Number: 0 - 255 -->
<P18>0</P18>

<!-- Number: 0 - 255 -->
<P19>0</P19>

<!-- Number: 0 - 255 -->
<P20>0</P20>

<!-- DNS 1 Server. Ignore if DHCP or PPPoE is used -->
<!-- Number: 0 - 255 -->
<P21>0</P21>

<!-- Number: 0 - 255 -->
<P22>0</P22>

<!-- Number: 0 - 255 -->
<P23>0</P23>

<!-- Number: 0 - 255 -->
<P24>0</P24>

<!-- DNS 2 Server. Ignore if DHCP or PPPoE is used -->
<!-- Number: 0 - 255 -->
<P25>0</P25>

<!-- Number: 0 - 255 -->
<P26>0</P26>

<!-- Number: 0 - 255 -->
<P27>0</P27>

<!-- Number: 0 - 255 -->
<P28>0</P28>

<!-- Preferred DNS server.  (if specified). -->
<!-- Number: 0 - 255 -->
<P92>0</P92>

<!-- Number: 0 - 255 -->
<P93>0</P93>

<!-- Number: 0 - 255 -->
<P94>0</P94>

<!-- Number: 0 - 255 -->
<P95>0</P95>

<!-- IPv6 Address type. 0 - Auto Configured, 1 - Statically Configured. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1419>0</P1419>

<!-- DNS Server 1 for IPv6 Address -->
<!-- String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1424></P1424>

<!-- DNS Server 2 for IPv6 Address -->
<!-- String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1425></P1425>

<!-- Preferred DNS Server for IPv6 Address -->
<!-- String: a-z, A-Z, 0-9, ".", ":", "[", "]" -->
<P1423></P1423>

<!-- IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static -->
<!-- Number: 0, 1 -->
<P1426></P1426>

<!-- Full Static: Static IPv6 Address -->
<!-- P1420 -->

<!-- Full Static: IPv6 Prefix Length -->
<!-- P1421 -->

<!-- Prefix Static: IPv6 Prefix (64bits) -->
<!-- P1422 -->


<!--Network/Advanced Settings -->

<!-- 802.1X Mode. 0 - disable, 1 - EAP-MD5. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P7901>0</P7901>

<!-- 802.1X Identity. Max length allowed is 64 characters -->
<!-- String -->
<P7902></P7902>

<!-- MD5 Password. Max length allowed is 64 characters -->
<!-- String -->
<P7903></P7903>

<!-- HTTP Proxy -->
<!-- String -->
<P1552></P1552>

<!-- HTTPS Proxy -->
<!-- String -->
<P1553></P1553>

<!-- Layer 3 QoS (IP Diff-Serv or Precedence value for RTP). Default is 12 -->
<!-- Number: 0 - 63 -->
<!-- Mandatory -->
<P38>12</P38>

<!-- Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0 -->
<!-- Number: 0 - 4094 -->
<!-- Mandatory -->
<P51>0</P51>

<!-- Layer 2 QoS. 802.1p priority value (0 - 7). Default is 0 -->
<!-- Number: 0 - 7 -->
<!-- Mandatory -->
<P87>0</P87>

<!-- PC Port Mode. 0 - Enable, 1 - Disabled, 2 - Mirrored. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P1348>0</P1348>

<!-- Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1684>1</P1684>


<!--Maintenance/ Web/Telnet Access -->

<!-- Disable Telnet. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P276>0</P276>

<!-- End User Password -->
<!-- String: a-z, A-Z, 0-9 -->
<P196>{$user_password}</P196>

<!-- Admin password for web interface -->
<!-- String: a-z, A-Z, 0-9 -->
<P2>{$admin_password}</P2>


<!--Maintenance/Upgrade and Provisioning -->

<!-- Firmware Upgrade and Provisioning -->
<!-- 0 - Always Check For New Firmware -->
<!-- 1 - Check New Firmware only when F/W pre/suffix changes -->
<!-- 2 - Always Skip the Firmware Check -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P238>0</P238>

<!-- XML Config File Password -->
<!-- String -->
<P1359></P1359>

<!-- HTTP/HTTPS User Name -->
<!-- String -->
<P1360>{$http_auth_username}</P1360>

<!-- HTTP/HTTPS Password -->
<!-- String -->
<P1361>{$http_auth_password}</P1361>

<!-- Firmware Upgrade Via. 0 - TFTP Upgrade,  1 - HTTP Upgrade, 2 - HTTPS Upgrade. Default is 1 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P212>1</P212>

<!-- Firmware Server Path -->
<!-- String -->
{if isset($grandstream_firmware_path) && isset($firmware_version)}
<P192>{$grandstream_firmware_path}/gxp110x/{$firmware_version}</P192>
{elseif isset($grandstream_firmware_path)}
<P192>{$grandstream_firmware_path}/gxp110x</P192>
{else}
<P192>{$domain_name}{$project_path}/app/provision</P192>
{/if}

<!-- Config Server Path -->
<!-- String -->
{if $grandstream_config_server_path=="none"}
<P237></P237>
{elseif isset($grandstream_config_server_path)}
<P237>{$grandstream_config_server_path}</P237>
{elseif isset($domain_name)}
<P237>{$domain_name}{$project_path}/app/provision</P237>
{/if}

<!-- Firmware File Prefix -->
<!-- String -->
<P232></P232>

<!-- Firmware File Postfix -->
<!-- String -->
<P233></P233>

<!-- Config File Prefix -->
<!-- String -->
<P234></P234>

<!-- Config File Postfix -->
<!-- String -->
<P235></P235>

<!-- Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1 -->
<!-- When set to Yes(1), it will override the configured provision path and method -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
{if isset($grandstream_dhcp_option_override)}<P145>{$grandstream_dhcp_option_override}</P145>{else}<P145>1</P145>{/if}

<!-- Allow DHCP Option 120 to Override SIP Server -->
<!-- 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
{if isset($grandstream_dhcp_option_override_sip_server)}<P1411>{$grandstream_dhcp_option_override_sip_server}</P1411>{else}<P1411>0</P1411>{/if}

<!-- Automatic Upgrade. 0 - No, 1 - Yes. Default is No -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P194>0</P194>

<!-- Check for new firmware every () minutes. Default is 7 days. -->
<!-- Number: 60-86400 -->
<!-- Mandatory -->
<P193>10080</P193>

<!-- Hour of the Day (0-23). Default is 1 -->
<!-- Number: 0 - 23 -->
<P285>1</P285>

<!-- Day of the Week (0-6). Default is 1 -->
<!-- Number: 0-6 -->
<P286>1</P286>

<!-- Authenticate Conf File. 0 - No, 1 - Yes. Default is No -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P240>0</P240>

<!-- Maintenance/Syslog -->

<!-- Syslog Server (name of the server, max length is 64 characters) -->
<!-- String -->
<P207></P207>

<!-- Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0 -->
<!-- Number: 0, 1 , 2, 3, 4 -->
<!-- Mandatory -->
<P208>0</P208>

<!-- Send SIP Log. 0 - Do not send SIP log in Syslog, 1 - Send SIP log in Syslog if configured and set to DEBUG level. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1387>0</P1387>

<!-- Auto recover from abnormal. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1438>1</P1438>

<!-- Maintenance/Language -->


<!-- Display Language. Default is auto -->
<!-- ar - Arabic, cz - Czech, de - Deutsh -->
<!-- en - English, es - Spanish, fr - Francais -->
<!-- he - Hebrew, hr - Hrvatski, hu - Magyar -->
<!-- it - Italiano, ja - japanese, ko - korean -->
<!-- nl - Dutch, pl - Polski, pt - Portugue -->
<!-- ru - Russian, sl - Slovenian, tr - Turkish -->
<!-- zh-tw - traditional chinese, zh - simplified chinese, auto - Automatic -->
<!-- gxp - Downloaded Language -->
<!-- String -->
<!-- Mandatory -->
<P1362>auto</P1362>

<!-- Language File postfix (for Downloaded Language) -->
<!-- String -->
<P399></P399>


<!--  Maintenance/TR-069 -->


<!-- Enable TR069. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- P1409 -->

<!-- ACS URL -->
<!-- String -->
<!-- P4503  -->

<!-- TR-069 Username -->
<!-- String -->
<P4504></P4504>

<!-- TR-069 Password -->
<!-- String -->
<P4505></P4505>

<!-- Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P4506>0</P4506>

<!-- Periodic Inform Interval -->
<!-- Number -->
<P4507>86400</P4507>

<!-- Connection Request Username -->
<!-- String: a-z, A-Z, 0-9 -->
<P4511></P4511>

<!-- Connection Request Password -->
<!-- String: a-z, A-Z, 0-9 -->
<P4512></P4512>

<!-- Connection Request Port -->
<!-- Number -->
<P4518>0</P4518>

<!-- CPE SSL Certificate -->
<!-- String: a-z, A-Z, 0-9 -->
<P8220></P8220>

<!-- CPE SSL Private Key -->
<!-- String: a-z, A-Z, 0-9 -->
<P8221></P8221>

<!-- Maintenance/Security -->


<!-- SIP TLS Certificate -->
<!-- String: a-z, A-Z, 0-9 -->
<!-- P280 = -->

<!-- SIP TLS Private Key -->
<!-- String: a-z, A-Z, 0-9 -->
<!-- P279 = -->

<!-- SIP TLS Private Key Password -->
<!-- String: a-z, A-Z, 0-9 -->
<!-- P281 = -->

<!--Settings/General Settings -->

<!-- Local RTP port. Default is 5004 -->
<!-- Number: 1024 - 65535. Must be even number -->
<!-- Mandatory -->
<P39>5004</P39>

<!-- Use Random Port. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P78>0</P78>

<!-- Keep-alive interval (in seconds). Default is 20 -->
<!-- Number: 10 - 160 -->
<!-- Mandatory -->
<P84>20</P84>

<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50 -->
<!-- String: a-z, A-Z, 0-9, ".", ":" -->
<P101></P101>

<!-- STUN server -->
<!-- String -->
<P76></P76>

<!--Settings/Call Features -->

<!-- Off-hook Auto Dial -->
<!-- String -->
<P71></P71>

<!-- Off-hook timeout (in seconds). Default is 30 -->
<!-- Number: 10 - 60 -->
<!-- Mandatory -->
<P1485>30</P1485>

<!-- Disable Call Waiting. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P91></P91>

<!-- Disable Call-Waiting Tone. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P186>0</P186>

<!-- Disable Direct IP Call. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1310>0</P1310>

<!-- Use Quick IP-call mode. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P184>0</P184>

<!-- Disable Conference. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1311>0</P1311>

<!-- Enable MPK sending DTMF, 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1339>0</P1339>

<!-- Enable Idle Mute. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1565>0</P1565>

<!-- Disable Transfer. 0 - No, 1 - Yes. Defauls is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1341>0</P1341>

<!-- In-call dial number on pressing transfer key -->
<!-- String -->
<P1525></P1525>

<!-- Auto-Attended Transfer. 0 - No, 1 -Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1376>0</P1376>

<!-- Do not escape # as 23% in SIP URL. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1406>0</P1406>

<!-- Click-To-Dial Feature. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1561>0</P1561>

<!-- Blink message LED on ringing. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1696>0</P1696>

<!-- Call History Flash Writing: 0 means this option is disabled -->
<!-- Write Timeout, 30-3600, in seconds, default is 300 -->
<!-- Number: 30 - 3600 -->
<!-- Mandatory -->
<P1433>300</P1433>

<!-- Max Unsaved Log, 0-500, default is 200 -->
<!-- Number: 0-500 -->
<!-- Mandatory -->
<P1434>4</P1434>

<!-- Enable FLASH Key as CONF. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1390>0</P1390>


<!--Settings/Ring Tone -->

<!--Call Progress Tones  -->

<!-- Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; -->
<!-- (Frequencies are in Hz and cadence on and off are in 10ms) -->

<!-- System Ring Tone -->
<!-- String -->
<!-- Mandatory -->
<P345>f1=440,f2=480,c=200/400;</P345>

<!-- Dial Tone -->
<!-- String -->
<!-- Mandatory -->
<P343>f1=350,f2=440;</P343>

<!-- Message Waiting Tone -->
<!-- String -->
<!-- Mandatory -->
<P344>f1=350,f2=440,c=10/10;</P344>

<!-- Ring Back Tone -->
<!-- String -->
<!-- Mandatory -->
<P346>f1=440,f2=480,c=200/400;</P346>

<!-- Call-Waiting Tone -->
<!-- String -->
<!-- Mandatory -->
<P347>f1=440,f2=440,c=25/525;</P347>

<!-- Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P1555>0</P1555>

<!-- Busy Tone -->
<!-- String -->
<!-- Mandatory -->
<P348>f1=480,f2=620,c=50/50;</P348>

<!-- Reorder Tone -->
<!-- String -->
<!-- Mandatory -->
<P349>f1=480,f2=620,c=25/25;</P349>


<!-- Settings/Audio Control -->

<!-- Handset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0 -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P1464>0</P1464>

<!-- Settings/Programmable Keys -->

<!-- Multi-Purpose Keys  -->

<!-- Multipupose Key 1 -->

<!-- Key Mode. -->
<!-- 0 - Speed Dial -->
<!-- 5 - DialDTMF -->
<!-- 6 - Voicemail -->
<!-- 7 - CallReturn -->
<!-- 8 - Transfer -->
<!-- 10 - Intercom -->
<!-- 12 - 3-way Conference -->
<!-- Number: 0, 5, 6, 7, 8, 10, 12 -->
<!-- Mandatory -->
<P323>0</P323>

<!-- Account. 0 - Account 1 -->
<!-- Number: 0 -->
<!-- Mandatory -->
<P301>0</P301>

<!-- Name. Max length allowed is 32 characters -->
<!-- String -->
<P302></P302>

<!-- User ID.  Max length allowed is 64 characters -->
<!-- String -->
<P304></P304>

<!-- Multipupose Key 2 -->

<!-- Key Mode.  -->
<!-- 0 - Speed Dial -->
<!-- 5 - DialDTMF -->
<!-- 6 - Voicemail -->
<!-- 7 - CallReturn -->
<!-- 8 - Transfer -->
<!-- 10 - Intercom -->
<!-- 12 - 3-way Conference -->
<!-- Number: 0, 5, 6, 7, 8, 10, 12 -->
<!-- Mandatory -->
<P304>0</P304>

<!-- Account. 0 - Account 1 -->
<!-- Number: 0 -->
<!-- Mandatory -->
<P304>0</P304>

<!-- Name. Max length allowed is 32 characters -->
<!-- String -->
<P305></P305>

<!-- User ID. Max length allowed is 64 characters. -->
<!-- String -->
<P306></P306>

<!-- Multipupose Key 3 -->

<!-- Key Mode.  -->
<!-- 0 - Speed Dial -->
<!-- 5 - DialDTMF -->
<!-- 6 - Voicemail -->
<!-- 7 - CallReturn -->
<!-- 8 - Transfer -->
<!-- 10 - Intercom -->
<!-- 12 - 3-way Conference -->
<!-- Number: 0, 5, 6, 7, 8, 10, 12 -->
<!-- Mandatory -->
<P325>0</P325>

<!-- Account. 0 - Account 1 -->
<!-- Number: 0 -->
<!-- Mandatory -->
<P307>0</P307>

<!-- Name. Max length allowed is 32 characters -->
<!-- String -->
<P308></P308>

<!-- User ID. Max length allowed is 64 characters -->
<!-- String -->
<P309></P309>

<!-- Multipupose Key 4 -->

<!-- Key Mode.  -->
<!-- 0 - Speed Dial -->
<!-- 5 - DialDTMF -->
<!-- 6 - Voicemail -->
<!-- 7 - CallReturn -->
<!-- 8 - Transfer -->
<!-- 10 - Intercom -->
<!-- 12 - 3-way Conference -->
<!-- Number: 0, 5, 6, 7, 8, 10, 12 -->
<!-- Mandatory -->
<P326>0</P326>

<!-- Account. 0 - Account 1 -->
<!-- Number: 0 -->
<!-- Mandatory -->
<P310>0</P310>

<!-- Name. Max length allowed is 32 characters -->
<!-- String -->
<P312></P312>

<!-- User ID. Max length allowed is 64 characters -->
<!-- String -->
<P312></P312>

<!-- Phonebook/Phonebook Management -->

<!-- Phonebook Key Function. 0 - Default, 1 - LDAP Search, 2 - Local Phonebook, 3 - Local Group. -->
<!-- Number: 0, 1, 2, 3. -->
<!-- Mandatory -->
<P1526>0</P1526>

</config>
</gs_provision>