FusionPBX
fbfc80d629
Update t53 and t53w
2026-01-30 13:14:29 -07:00
Antonio Fernandez
2038b74e83
Snom multicast ( #7729 )
...
* added multicast to Snom phones
* adding default setting for multicast_address
2026-01-30 07:29:24 -07:00
Marvin Skeete
e44a340f16
Added Grandstream station label for gxp2130_35_40_60_70 ( #7508 )
...
* Added Grandstream station label
2026-01-28 10:07:39 -07:00
FusionPBX
ab32649d66
Add yealink_idle_clock variable
2026-01-15 13:18:20 -07:00
frytimo
7ddf3f8ae0
Add missing grandstream_firmware_upgrade_protocol in template ( #7696 )
2026-01-13 20:11:50 -07:00
FusionPBX
39f26590fe
Update the Yealink stun_server settings
2026-01-10 18:27:49 -07:00
FusionPBX
aa59072372
Update Stun settings for Yealink W7xp
2026-01-10 17:41:44 -07:00
FusionPBX
501e14d496
Update STUN settings for nat_stun enable and server
2026-01-10 12:58:45 -07:00
denisent
a408596f26
Fix 1 missing empty line in ax86r template ( #7667 )
2025-12-18 14:47:41 -07:00
denisent
5ee6b1b0e9
Fix account 2 through 6 registering ( #7666 )
...
Fixes registrations for accounts 2 through 6
Accounts 7 - 16 are non defined in the template
2025-12-18 09:12:12 -07:00
denisent
389c47faf3
Fix new lines in ax83h and ax86r templates ( #7665 )
...
* fix new lines in ax83h template
phone does not provision without the extra lines
* fix new lines in ax86r template
phone does not provision without the extra lines
2025-12-17 01:31:57 -07:00
Bifur1
9046a6ea14
Update Groundwire template ( #7653 )
...
* Update Groundwire template
Voicemail number was not properly named and would not provision. & was needed under wsContactsURL to validate the xml. Opening it gave an error stating:
This page contains the following errors:
error on line 14 at column 119: EntityRef: expecting ';'
Below is a rendering of the page up to the first error.
* Update Groundwire template
Had one too many & under wsContactsUrl line
2025-12-06 08:10:18 -07:00
AdSecIT
92cd333e50
Updated Cisco 8000 series templates for KEM button compatiblity. ( #7643 )
...
* Updated Cisco 8000 series templates for KEM button compatibility.
Updated the Cisco 8000 series Key Expansion Module format in the templates to improve editing and provisioning button changes, with the label correctly set to the KEM.
Set max KEM Units to 2 ( Phones Maximum )
2025-11-25 07:49:05 -07:00
AdSecIT
cdc7be9476
Auth ID and Auth Realm Set for Provisioning Authentication. ( #7636 )
...
Set Auth ID and Auth Realm to assist in authenticating from the FusionPBX provisioning server to the Cisco phones.
2025-11-21 16:48:11 -07:00
markjcrane
c74a345498
Yealink phones replace account.1.sip_server_host on the G, S, and U series phones
...
Replaced with account.1.sip_server.1.address
2025-11-21 12:59:30 -07:00
markjcrane
ee9336f325
Add Yealink password_use_default.mode
2025-11-21 12:35:24 -07:00
Alex
17f7d3c515
Add Htek uc924u template ( #7613 )
...
* Add Htek uc924u template
* Update {$mac}.cfg
2025-11-13 13:15:22 -07:00
markjcrane
195c158128
Add the htek_provision_url
2025-11-13 11:52:48 -07:00
markjcrane
85aeefb96d
Fix the spa_provision_url
2025-11-13 11:52:31 -07:00
markjcrane
580235672b
Update the Config Server Path
2025-11-13 11:45:50 -07:00
FusionPBX
2ca7565a4d
Add a provisioning template for Htek uc926u
2025-11-12 17:54:25 -07:00
markjcrane
4809dc34ce
Fix the yealink t74 wallpaper variable
2025-11-11 16:01:55 -07:00
FusionPBX
c1d81c6594
Change D785 to RW
2025-11-05 12:51:40 -07:00
markjcrane
ac8f37cdd1
Add Polycom alterInfo and ring tones
...
VVX 5.x, 6.x, 250 and 450
2025-11-04 17:42:52 -07:00
markjcrane
54d07d5401
Add Yealink template for ax86r
2025-10-31 21:23:36 -06:00
FusionPBX
4eac9f51ee
Fix a minor spelling mistake in Yealink configs
2025-10-27 12:18:22 -06:00
FusionPBX
d6ac324819
Update DND settings in Yealink configuration
2025-10-15 11:22:45 -06:00
FusionPBX
724937dd73
Add setting polycom_restrict_pickup
2025-09-12 16:16:31 -06:00
FusionPBX
1593564790
Use FILTER_VALIDATE_BOOLEAN
2025-09-12 15:52:49 -06:00
Kamil M
12ec68260b
Added directory extension ringer controller ( #7488 )
...
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
* Update {$mac}.xml
2025-09-12 12:09:47 -06:00
FusionPBX
a769c6fb9e
Fix the htek templates
2025-08-30 12:01:03 -06:00
AdSecIT
358967fce6
Yealink T7 and T8 Templates ( #7476 )
...
Initial templates for Yealink Series T7 and T8 Phones.
2025-08-28 06:59:36 -06:00
AdSecIT
c058a4059a
Template for T85W ( #7475 )
...
* Create y000000000000.boot
* Add files via upload
2025-08-27 22:47:18 -06:00
FusionPBX
59378275c0
Fix the daylight_savings_enabled for Polycom
2025-08-26 16:48:41 -06:00
FusionPBX
1591149590
Add provision setting grandstream_match_callerid_1 - 10
2025-08-21 15:11:45 -06:00
IAmBecomeDeath
f26aee738d
Add support for fanvil w611w ( #7325 )
...
* Create {$mac}.xml
Added mac.xml for w611w.
* Create directory.xml
Modeled off t54w directory.xml. Modified for Fanvil XML structure.
2025-08-20 08:07:25 -06:00
AdSecIT
637f79bd5a
Update {$mac}.cfg ( #7456 )
...
* Update {$mac}.cfg
Changing from Successive registration to Concurrent registration (default) for fallback redundancy.
* Update {$mac}.cfg
Changing from Successive registration to Concurrent registration (default) for fallback redundancy.
* Update {$mac}.cfg
Changing from Successive registration to Concurrent registration (default) for fallback redundancy.
2025-08-14 14:13:07 -06:00
FusionPBX
9704777433
Revert "Update {$mac}.xml ( #7383 )" ( #7435 )
...
This reverts commit 40bc41cfea
2025-07-30 08:50:04 -06:00
Sergey
40bc41cfea
Update {$mac}.xml ( #7383 )
...
Update some basic default configuration for 8900 series.
2025-07-30 08:07:50 -06:00
Mendel
6ad8326463
Added Algo Devices and Default settingd ( #7434 )
2025-07-30 08:03:39 -06:00
FusionPBX
40d449eb06
Create {$mac}-directory.xml
2025-07-30 07:23:08 -06:00
FusionPBX
08e3fd712f
Add Poly Edge E550
2025-07-30 07:22:40 -06:00
Mendel
bf4b7163ce
Update {$mac}.xml ( #7432 )
...
Updated SIP Ports, Timezone and Time Verible.
2025-07-24 10:50:30 -06:00
Mihir Gajjar
82029bc974
Added Snom status blocked messages ( #7429 )
...
* Added status blocked messages
* Added status blocked messages
* Added status blocked messages
2025-07-23 19:47:51 -06:00
FusionPBX
6449554aa4
Update {$mac}.xml
2025-07-15 21:40:52 -06:00
FusionPBX
b7183886d4
Update {$mac}.xml
2025-07-15 21:36:35 -06:00
FusionPBX
0eb825d621
Add Grandstream Call-pickup
...
BLF Call-pickup. Options: Auto, Force, Disabled
2025-07-14 14:07:04 -06:00
jailbird777
e68ed8446f
Add Yealink AX83H Wi-Fi Phone ( #7402 )
2025-07-03 12:17:25 -06:00
FusionPBX
5aabe28079
Update Grandstream gxp2135 to gxp2170 minor
2025-06-30 12:24:28 -06:00
Trick Solutions
282134980e
Fix closing tag on if/else ( #7390 )
...
The firmware download section was missing the closing {/if}
Co-authored-by: Matthew Midgett <mmidgett@nationalwi-fi.com >
2025-06-18 15:14:18 -06:00
