* Fix sort on call broadcast display
* Grandstream Template Updates
For grp/gxp, added settings for intercom auto answer and multicast paging
For gxw42xx - Added off-hook auto-dial settings to all lines
For wp820 - Fixed incorrect P-codes and added setings for wifi roaming
Contributed new template for gxv3480
The template for codec enable settings was taking a value as 1 if it was set in the settings. It was not taking the actual value inside it. So I have edited the templates to check the value if it's set to true.
* Provisioning template changes
Grandstream
GAC2500 - Added account sip port to grandstream template after account server name
GRP2612 - Added Variable for grandstream dial timeout
GRP2612 - Added Variable for grandstream lock volume
GRP2612w - Added Variable for grandstream dial timeout
GRP2612w - Added Variable for grandstream lock volume
GRP2613 - Added Variable for grandstream lock volume
GRP2614 - Added Variable for grandstream dial timeout
GRP2614 - Added Variable for grandstream lock volume
GRP2614 - Added Variable for granstream call popup enabled
GRP2615 - Added Variable for grandstream dial timeout
GRP2615 - Added Variable for grandstream lock volume
GRP2616 - Added Variable for grandstream lock volume
GRP26xx - Added Variable for grandstream lock volume
GXP2160 - Changed template to default enable options keepalive
GXP2160 - Added option for multicast listen address with "if isset" for variable on P1569
GXP2160 - Added Variable for grandstream lock volume
GXP2160 - added variable grandstream_weather_enable to enable/disable weather function in phones
GXP2170 - Added Variable for grandstream dial timeout
GXP2170 - Added Variable for grandstream lock volume
GXP2170 - Added Variable for grandstream stun server
GXP2170 - Added Variable for granstream call popup enabled
GXP2170 - Added option for multicast listen address with "if isset" for variable on P1569
GXP2170 - added variable grandstream_weather_enable to enable/disable weather function in phones
GXP3240 - Added account sip port to grandstream template after account server name
HTek
UC903 - Added account sip port to htek template after account server name
UC903 - Added variable to specify account 1 ringtone
UC903 - Added ** as pickup code - Not defined
UC903 - Added variable for screen timeout
UC903 - Enabled call waiting tone P8850 - its off by default for some reason
UC903 - fixed variable P2 to set the admin password on the phone from default settings, was not defined
UC903 - Added variable to change the pc port mode if expansion module needed P231
UC903 - Fixed expansion module key types - not defined
UC923 - Added variable to specify account 1 ringtone
UC923 - Added variable to change the pc port mode if expansion module needed P231
UC923 - Added ** as pickup code - Not defined
UC923 - Added variable for screen timeout
UC923 - Enabled call waiting tone P8850 - its off by default for some reason
UC923 - fixed variable P2 to set the admin password on the phone from default settings, was not defined
UC923 - Fixed expansion module key types - not defined
UC924 - Added variable to specify account 1 ringtone
UC924 - Added variable to change the pc port mode if expansion module needed P231
UC924 - Added ** as pickup code - Not defined
UC924 - Added variable for screen timeout
UC924 - Enabled call waiting tone P8850 - its off by default for some reason
UC924 - fixed variable P2 to set the admin password on the phone from default settings, was not defined
UC924 - Fixed expansion module key types - not defined
UC926 - Added variable to specify account 1 ringtone
UC926 - Added variable to change the pc port mode if expansion module needed P231
UC926 - Added ** as pickup code - Not defined
UC926 - Added variable for screen timeout
UC926 - Enabled call waiting tone P8850 - its off by default for some reason
UC926 - fixed variable P2 to set the admin password on the phone from default settings, was not defined
UC926 - Fixed expansion module key types - not defined
Snom
D735 - Added code given to use by snom to light the BLF green when avail and red when in use
Fanvil
X210 - Added default setting for fanvil blf pickup code
X210 - Added if exist in template for fanvil x210 the pickup code var
* grandstream_stun_server variable already exists
---------
Co-authored-by: FusionPBX <markjcrane@gmail.com>
I was having an issue where my T41P phones were getting provisioned with IPv4 & IPv6 - even though I specified in default settings yealink_ip_address_mode=0 for IPv4 only. Checked the y000000000036.cfg, which was setting it correctly. The issue was that {$mac}.cfg was overriding the correct setting. There were several instances of "network.ip_address_mode = 2" in this file, which specifies ipv4&ipv6. I changed all 5 of those entries in this file to pull from the default setting {$yealink_ip_address_mode} rather than just setting a static value of 2. I don't know why it has this listed in this file 5 times. But, this change resolved my issue and will force the T41P provisioning to follow FusionPBX default settings.
* Fix the registration failed after provision Flyingvoice phone.
* Fix the parameter configuration of Flyingvoice not displayed in the Default Settings
* Fix: after configuring SIP line 1 of Flyingvoice phone, other SIP lines are disable and the configuration parameters of Flyingvoice are not displayed by default settings.
* Fix after configuring SIP line 1 of Flyingvoice phone, other SIP lines are disable.
* Fix the configuration parameters of Flyingvoice are not displayed by default settings.
* Fix: when only one sip line's shared line is enable, the shared lines of all SIP lines will be enable.
* Fix: unable to generate configuration file of Flyingvoice due to syntax error.
* Add the P1X, P2X, P3X, P5X, i86Box, iMetalBox, audioKit Series for Flyingvoice in Devices.
* Update all model templates of Flyingvoice.
Added a line to set SRTP encryption. the default setting yealink_srtp_encryption was not setting properly to my T56a devices. I downloaded my config files and did not find an entry for srtp at all.
compared with the t54w template and it did have a srtp setting. So I pretty much stole the line from the T54w template and dumped it in here.
The T54w template is vastly superior to this one and this probably needs a rewrite to bring it in line.
Tested on my T56a and it at least gets the job done.
