diff --git a/resources/templates/provision/yealink/t48s/y000000000065.cfg b/resources/templates/provision/yealink/t48s/y000000000065.cfg
index 5e7c887028..da91bfdd97 100644
--- a/resources/templates/provision/yealink/t48s/y000000000065.cfg
+++ b/resources/templates/provision/yealink/t48s/y000000000065.cfg
@@ -297,7 +297,7 @@ watch_dog.enable =
 sip.use_23_as_pound =
 
 #Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled;
-sip.rfc2543_hold =
+sip.rfc2543_hold = {$yealink_rfc2543_hold}
 
 #Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default);
 sip.use_out_bound_in_dialog =
@@ -638,8 +638,11 @@ features.group_listen_in_talking_enable =
 features.call_completion_enable =
 
 #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
-features.direct_ip_call_enable = 0
-sip.trust_ctrl=1
+features.direct_ip_call_enable = {$yealink_direct_ip_call_enable}
+sip.trust_ctrl = {$yealink_trust_ctrl}
+
+#It enables or disables the IP phone to display the feature name instead of the feature access code when dialing and in talk;(0-Disabled;1-Enabled)
+features.hide_feature_access_codes.enable = {$yealink_hide_feature_access_codes_enable}
 
 #Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off;
 features.power_led_on = 1
@@ -658,6 +661,11 @@ features.idle_talk_power_led_flash_enable =
 #Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled;
 features.auto_release_bla_line =
 
+#It enables or disables the IP phone to display the pop-up message box when it receives a new voice mail.
+features.voice_mail_popup.enable = {$yealink_voice_mail_popup_enable}
+
+#It enables or disables the IP phone to display the pop-up message box when it misses a call.
+features.missed_call_popup.enable = {$yealink_missed_call_popup_enable}
 
 #######################################################################################
 ##                                   Features FWD                                    ##
@@ -682,7 +690,7 @@ features.dnd.emergency_authorized_number =
 ##                                   Features BLF                                    ##
 #######################################################################################
 #Configure the LED flashing mode of the BLF key (line key). The value is 0(default) or 1.
-features.blf_led_mode =
+features.blf_led_mode = {$yealink_blf_led_mode}
 
 features.blf_list_version = 0
 features.blf_and_callpark_idle_led_enable = 0
@@ -878,8 +886,8 @@ phone_setting.headsetkey_mode =
 #Enable or disabled mail power led flash. 0-Disabled, 1-Enabled.
 phone_setting.mail_power_led_flash_enable = 1
 
-#Disable missed call power led flash 0-Disabled, 1-Enabled
-phone_setting.missed_call_power_led_flash.enable = 0
+#It enables or disables the power indicator LED to flash when the IP phone misses a call.
+phone_setting.missed_call_power_led_flash.enable = {$yealink_missed_call_power_led_flash_enable}
 
 #######################################################################################
 ##                                   Phone Setting UI                                ##
@@ -920,8 +928,8 @@ phone_setting.backlight_time = {$yealink_backlight_time}
 #######################################################################################
 ##                                   Wallpaper                                       ##
 #######################################################################################
-wallpaper_upload.url = {$yealink_t48g_wallpaper}
-phone_setting.backgrounds =  Config:yealink_t48g_wallpaper.png
+wallpaper_upload.url = {$yealink_t48s_wallpaper}
+phone_setting.backgrounds =  Config:yealink_t48s_wallpaper.png
 
 #######################################################################################
 ##                                   Multicast                                       ##
@@ -1561,4 +1569,4 @@ directory_setting.url = http://{if isset($http_auth_username)}{$http_auth_userna
 ##                                   Configure the access URL of firmware            ##
 #######################################################################################
 #Before using this parameter, you should store the desired firmware (x.71.x.x.rom) to the provisioning server.
-firmware.url = {$yealink_t48g_firmware_url}
+firmware.url = {$yealink_t48s_firmware_url}