Yealink remove some of the trailing white spaces. Fix the power led light for voicemail.

resources/templates/provision/yealink/t20p/y000000000007.cfg

@@ -8,7 +8,7 @@
 
 #Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
 #Require reboot;
-network.internet_port.type =     
+network.internet_port.type = 
 
 #Configure the static IP address, subnet mask, gateway and DNS server.
 #Require Reboot;
@@ -16,7 +16,7 @@ network.internet_port.ip =
 network.internet_port.mask = 
 network.internet_port.gateway =
 network.primary_dns= 
-network.secondary_dns =      
+network.secondary_dns = 
 
 #Configure the username and password for PPPOE connection.
 #Require reboot;
@@ -25,7 +25,7 @@ network.pppoe.password =
 
 #Configure the PC port type; 0-Router, 1-Bridge (default);
 #Require reboot;
-network.bridge_mode =     
+network.bridge_mode = 
 
 #Configure the IP address and mask when the PC port is configured as Router.
 #Require reboot;
@@ -42,27 +42,27 @@ network.dhcp.end_ip =
 
 #Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled;
 #Require reboot;
-network.vlan.internet_port_enable =            
+network.vlan.internet_port_enable = 
 
 #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
 #Require reboot;
-network.vlan.internet_port_vid =  
+network.vlan.internet_port_vid = 
 
 #Configure the VLAN priority, it ranges from 0 (default) to 7. 
-#Require reboot;            
+#Require reboot;
-network.vlan.internet_port_priority =        
+network.vlan.internet_port_priority = 
-        
+
 #Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; 
 #Require reboot;
-network.vlan.pc_port_enable =  
+network.vlan.pc_port_enable = 
 
 #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. 
 #Require reboot;
-network.vlan.pc_port_vid =      
+network.vlan.pc_port_vid = 
 
 #Configure the VLAN priority, it ranges from 0 (default) to 7. 
 #Require reboot;
-network.vlan.pc_port_priority =    
+network.vlan.pc_port_priority = 
 
 #Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only;
 #Require reboot;

resources/templates/provision/yealink/t26p/y000000000004.cfg

@@ -8,13 +8,13 @@
 
 #Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
 #Require reboot;
-network.internet_port.type =     
+network.internet_port.type = 
 
 #Configure the static IP address, subnet mask, gateway and DNS server.
 #Require Reboot;
-network.internet_port.ip =
+network.internet_port.ip = 
 network.internet_port.mask = 
-network.internet_port.gateway =
+network.internet_port.gateway = 
 network.primary_dns= 
 network.secondary_dns =
 
@@ -25,7 +25,7 @@ network.pppoe.password =
 
 #Configure the PC port type; 0-Router, 1-Bridge (default);
 #Require reboot;
-network.bridge_mode =     
+network.bridge_mode = 
 
 #Configure the IP address and mask when the PC port is configured as Router.
 #Require reboot;
@@ -42,27 +42,27 @@ network.dhcp.end_ip =
 
 #Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled;
 #Require reboot;
-network.vlan.internet_port_enable =            
+network.vlan.internet_port_enable = 
 
 #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
 #Require reboot;
-network.vlan.internet_port_vid =  
+network.vlan.internet_port_vid = 
+
+#Configure the VLAN priority, it ranges from 0 (default) to 7.
+#Require reboot;
+network.vlan.internet_port_priority = 
 
-#Configure the VLAN priority, it ranges from 0 (default) to 7. 
-#Require reboot;            
-network.vlan.internet_port_priority =        
-        
 #Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; 
 #Require reboot;
-network.vlan.pc_port_enable =  
+network.vlan.pc_port_enable = 
 
 #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. 
 #Require reboot;
-network.vlan.pc_port_vid =      
+network.vlan.pc_port_vid = 
 
 #Configure the VLAN priority, it ranges from 0 (default) to 7. 
 #Require reboot;
-network.vlan.pc_port_priority =    
+network.vlan.pc_port_priority = 
 
 #Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only;
 #Require reboot;
@@ -257,7 +257,7 @@ autoprovision.2.com_aes =
 autoprovision.2.mac_aes = 
 
 #######################################################################################
-##	                Phone Features                                                   ##
+##                  Phone Features                                                   ##
 #######################################################################################
 
 #Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); 
@@ -682,7 +682,7 @@ action_url.transfer_finished =
 action_url.transfer_failed = 
 
 #######################################################################################
-##         	                   Language Settings                                     ##       
+##                             Language Settings                                     ##
 #######################################################################################
 
 #Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech.
@@ -693,7 +693,7 @@ lang.wui =
 lang.gui = 
 
 #######################################################################################
-##         	                   Time Settings                                         ##
+##                             Time Settings                                         ##
 #######################################################################################
 
 #Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. 
@@ -741,7 +741,7 @@ local_time.dhcp_time =
 local_time.manual_time_enable =
 
 #######################################################################################
-##         	        Hot Desking                                                      ##
+##                      Hot Desking                                                      ##
 #######################################################################################
 #Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled;  
 #hotdesking.startup_register_name_enable = 0 (default)

resources/templates/provision/yealink/t42g/y000000000029.cfg

@@ -573,13 +573,8 @@ features.call_completion_enable =
 #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
 features.direct_ip_call_enable = 
 
-
 #Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off;
-{if isset($yealink_power_led_on) }
+features.power_led_on = 1
-features.power_led_on = {$yealink_power_led_on}
-{else}
-features.power_led_on = 
-{/if}
 
 #Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
 features.relog_offtime = 
@@ -590,7 +585,7 @@ features.ringer_device.is_use_headset =
 #Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
 #features.factory_pwd_enable = 1
 
-features.idle_talk_power_led_flash_enable =
+features.idle_talk_power_led_flash_enable = 
 
 #Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled;
 features.auto_release_bla_line = 
@@ -628,16 +623,16 @@ features.blf_and_callpark_idle_led_enable = 0
 ##                                   Features Intercom                               ##          
 #######################################################################################
 #Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default);
-features.intercom.allow  = 
+features.intercom.allow = 
 
 #Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.mute  = 
+features.intercom.mute = 
 
 #Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default);
-features.intercom.tone  = 
+features.intercom.tone = 
 
 #Enable or disable the phone to barge in an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.barge  = 
+features.intercom.barge = 
 
 #######################################################################################
 ##                                   Features Hotline                                ##          
@@ -803,7 +798,8 @@ phone_setting.custom_softkey_enable =
 #Configure the using mode of the headset key. The value is 0 or 1(default).
 phone_setting.headsetkey_mode = 
 
-phone_setting.mail_power_led_flash_enable = 0
+#Enable or disabled mail power led flash. 0-Disabled, 1-Enabled.
+phone_setting.mail_power_led_flash_enable = 1
 
 #######################################################################################
 ##                                   Phone Setting UI                                ##          

resources/templates/provision/yealink/t42g/{$mac}.cfg

@@ -2574,11 +2574,11 @@ voice_mail.number.6 = *97
 ## “X” ranges from 1 to 6;
 ##account.X.subscribe_mwi = 
 
-account.6.subscribe_mwi = 0
+account.6.subscribe_mwi = 1
 account.6.subscribe_mwi_expires = 3600
 
 #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
-account.6.subscribe_mwi_to_vm = 0
+account.6.subscribe_mwi_to_vm = 1
 
 account.6.subscribe_acd_expires= 3600
 

resources/templates/provision/yealink/t46g/y000000000028.cfg

@@ -573,13 +573,8 @@ features.call_completion_enable =
 #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
 features.direct_ip_call_enable = 
 
-
 #Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off;
-{if isset($yealink_power_led_on) }
+features.power_led_on = 1
-features.power_led_on = {$yealink_power_led_on}
-{else}
-features.power_led_on = 
-{/if}
 
 #Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
 features.relog_offtime = 
@@ -590,7 +585,7 @@ features.ringer_device.is_use_headset =
 #Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
 #features.factory_pwd_enable = 1
 
-features.idle_talk_power_led_flash_enable =
+features.idle_talk_power_led_flash_enable = 
 
 #Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled;
 features.auto_release_bla_line = 
@@ -628,16 +623,16 @@ features.blf_and_callpark_idle_led_enable = 0
 ##                                   Features Intercom                               ##          
 #######################################################################################
 #Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default);
-features.intercom.allow  = 
+features.intercom.allow = 
 
 #Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.mute  = 
+features.intercom.mute = 
 
 #Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default);
-features.intercom.tone  = 
+features.intercom.tone = 
 
 #Enable or disable the phone to barge in an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.barge  = 
+features.intercom.barge = 
 
 #######################################################################################
 ##                                   Features Hotline                                ##          
@@ -803,7 +798,8 @@ phone_setting.custom_softkey_enable =
 #Configure the using mode of the headset key. The value is 0 or 1(default).
 phone_setting.headsetkey_mode = 
 
-phone_setting.mail_power_led_flash_enable = 0
+#Enable or disabled mail power led flash. 0-Disabled, 1-Enabled.
+phone_setting.mail_power_led_flash_enable = 1
 
 #######################################################################################
 ##                                   Phone Setting UI                                ##          

resources/templates/provision/yealink/t48g/y000000000035.cfg

@@ -573,13 +573,8 @@ features.call_completion_enable =
 #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
 features.direct_ip_call_enable = 
 
-
 #Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off;
-{if isset($yealink_power_led_on) }
+features.power_led_on = 1
-features.power_led_on = {$yealink_power_led_on}
-{else}
-features.power_led_on = 
-{/if}
 
 #Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
 features.relog_offtime = 
@@ -590,7 +585,7 @@ features.ringer_device.is_use_headset =
 #Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
 #features.factory_pwd_enable = 1
 
-features.idle_talk_power_led_flash_enable =
+features.idle_talk_power_led_flash_enable = 
 
 #Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled;
 features.auto_release_bla_line = 
@@ -628,16 +623,16 @@ features.blf_and_callpark_idle_led_enable = 0
 ##                                   Features Intercom                               ##          
 #######################################################################################
 #Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default);
-features.intercom.allow  = 
+features.intercom.allow = 
 
 #Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.mute  = 
+features.intercom.mute = 
 
 #Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default);
-features.intercom.tone  = 
+features.intercom.tone = 
 
 #Enable or disable the phone to barge in an intercom call; 0-Disabled (default), 1-Enabled;
-features.intercom.barge  = 
+features.intercom.barge = 
 
 #######################################################################################
 ##                                   Features Hotline                                ##          
@@ -803,7 +798,8 @@ phone_setting.custom_softkey_enable =
 #Configure the using mode of the headset key. The value is 0 or 1(default).
 phone_setting.headsetkey_mode = 
 
-phone_setting.mail_power_led_flash_enable = 0
+#Enable or disabled mail power led flash. 0-Disabled, 1-Enabled.
+phone_setting.mail_power_led_flash_enable = 1
 
 #######################################################################################
 ##                                   Phone Setting UI                                ##