diff --git a/resources/templates/provision/yealink/t19p/directory.xml b/resources/templates/provision/yealink/t19p/directory.xml new file mode 100644 index 0000000000..a05b029e18 --- /dev/null +++ b/resources/templates/provision/yealink/t19p/directory.xml @@ -0,0 +1,74 @@ + +{foreach $contacts as $row} +{if $smarty.get.contacts == "users" && $row.category == "users"} + + {if $row.contact_name_given != ""} + {$row.contact_name_given} {$row.contact_name_family} + {else} + {$row.effective_caller_id_name} + {/if} + + {foreach $row.numbers as $number} + {if $number.phone_number != ""} + {$number.phone_number} + {else} + {$number.phone_extension} + {/if} + {/foreach} + +{elseif $smarty.get.contacts == "groups" && $row.category == "groups"} + + {if $row.contact_name_given != ""} + {$row.contact_name_given} {$row.contact_name_family} + {else} + {$row.effective_caller_id_name} + {/if} + + {foreach $row.numbers as $number} + {if $number.phone_number != ""} + {$number.phone_number} + {else} + {$number.phone_extension} + {/if} + {/foreach} + +{elseif $smarty.get.contacts == "extensions" && $row.category == "extensions"} + + {if $row.contact_name_given != ""} + {$row.contact_name_given} {$row.contact_name_family} + {else} + {$row.effective_caller_id_name} + {/if} + {if $row.phone_number != ""} + {$row.phone_number} + {else} + {$row.phone_extension} + {/if} + +{elseif $smarty.get.contacts == "all"} + + {if $row.contact_name_given != ""} + {$row.contact_name_given} {$row.contact_name_family} + {else} + {$row.effective_caller_id_name} + {/if} + + {if $row.category == "extensions"} + {if $row.phone_number != ""} + {$row.phone_number} + {else} + {$row.phone_extension} + {/if} + {else} + {foreach $row.numbers as $number} + {if $number.phone_number != ""} + {$number.phone_number} + {else} + {$number.phone_extension} + {/if} + {/foreach} + {/if} + +{/if} +{/foreach} + \ No newline at end of file diff --git a/resources/templates/provision/yealink/t19p/favorite_setting.xml b/resources/templates/provision/yealink/t19p/favorite_setting.xml new file mode 100644 index 0000000000..b4cc2caca2 --- /dev/null +++ b/resources/templates/provision/yealink/t19p/favorite_setting.xml @@ -0,0 +1,8 @@ + + + + + + + + \ No newline at end of file diff --git a/resources/templates/provision/yealink/t19p/y000000000053.cfg b/resources/templates/provision/yealink/t19p/y000000000053.cfg new file mode 100644 index 0000000000..13b8007da9 --- /dev/null +++ b/resources/templates/provision/yealink/t19p/y000000000053.cfg @@ -0,0 +1,1269 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server. +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= {$dns_server_primary} +network.secondary_dns = {$dns_server_secondary} + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Configure the PC port type; 0-Router, 1-Bridge (default); +#Require reboot; +network.bridge_mode = + +#Configure the IP address and mask when the PC port is configured as Router. +#Require reboot; +network.pc_port.ip = +network.pc_port.mask = + +#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.pc_port.dhcp_server = + +#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. +network.dhcp.start_ip = +network.dhcp.end_ip = + +#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.pc_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.pc_port_vid = {$yealink_vlan_pc_id} + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.pc_port_priority = {$yealink_vlan_pc_cos} + +#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only; +#Require reboot; +network.web_server_type = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120. +#Require reboot; +network.lldp.packet_interval = + +#Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default); +#Require reboot; +{if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if} + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the IP address of the syslog server. +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## TR069 ## +####################################################################################### + +#The TR069 feature is only applicable to some designated firmware versions. +#All settings of TR069 require reboot. +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; +managementserver.enable = + +#Configure the username and password for the phone to authenticate with the ACS. +managementserver.username = +managementserver.password = + +#Configure the access URL of the ACS. +managementserver.url = + +#Configure the username and password for the phone to authenticate the connection requests. +managementserver.connection_request_username = +managementserver.connection_request_password = + +#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; +managementserver.periodic_inform_enable = + +#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. +managementserver.periodic_inform_interval = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); +auto_provision.pnp_enable = + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enable = + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly; +#auto_provision.weekly.mask = 0123456 +#auto_provision.weekly.begin_time = 00:00 +#auto_provision.weekly.end_time = 00:00 + +auto_provision.weekly.mask = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = {$yealink_provision_url} + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Configure the username and password for downloading. +auto_provision.server.username = {$http_auth_username} +auto_provision.server.password = {$http_auth_password} + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_option.enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. +#Require reboot; +#"X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.name = + +#Configure the auto provisioning code. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.x.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.user = +#autoprovision.x.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.x.com_aes = +#autoprovision.x.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + +autoprovision.2.name = +autoprovision.2.code = +autoprovision.2.url = +autoprovision.2.user = +autoprovision.2.password = +autoprovision.2.com_aes = +autoprovision.2.mac_aes = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); +sip.use_23_as_pound = + +#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; +sip.rfc2543_hold = + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +sip.check_autop_result_before_register = + +sip.send_response_by_request = + +#Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default); +sip.notify_reboot_enable = + +#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); +watch_dog.enable = + +#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; +redirect.enable = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled,1-Enabled(default); +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); +transfer.dsskey_deal_type = + +#Enable or disable the conference initiator to transfer the call when hanging up; +#0-Disabled(default),1-Enabled; +transfer.tran_others_after_conf_enable = + +####################################################################################### +## Voice ## +####################################################################################### + +#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; +voice.vad = + +#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); +voice.cng = + +#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); +voice.echo_cancellation = + +#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. +voice.side_tone= + +#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. +#Require reboot; +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); +voice.jib.adaptive = + +#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. +#voice.tone.country = Custom +voice.tone.country = + +#Customize the tone when the "voice.tone.country" is configured as Custom. +#The value format: Frequency/Duration. +#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. +#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). +#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. +#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma. +#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.record= +voice.tone.info = +voice.tone.stutter = +voice.tone.message = +voice.tone.autoanswer = + +#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.spk_vol = +voice.handset.spk_vol = +voice.headset.spk_vol = + +#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.tone_vol = +voice.handset.tone_vol = +voice.headset.tone_vol = + +#Configure the ring volume. It ranges from 0 to 15, the default value is 8. +voice.ring_vol= + +#Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8. +voice.group_spk_vol = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = {if $trusted_cert_only == "false"}0{elseif $trusted_cert_only == "true"}1{/if} + +#Define the login username and password of the user, var and administrator. +#If your username is defined as: security.user_name.admin = adminuser. +#and your password must like this: security.user_password = adminuser:adminpassword. +#adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set. +{if isset($user_name) } +security.user_name.user = {$user_name} +security.user_password = {$user_name}:{$user_password} +{/if} +{if isset($admin_name) } +security.user_name.admin = {$admin_name} +security.user_password = {$admin_name}:{$admin_password} +{/if} +{if isset($var_name) } +security.user_name.var = {$var_name} +security.user_password = {$var_name}:{$var_password} +{/if} + +#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; +#Require reboot; +security.var_enable = + +####################################################################################### +## Customize the softkey ## +####################################################################################### +#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Memory Key (For T38G only) ## +####################################################################################### +#X ranges from 1 to 10; +#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. +#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. +#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. +#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. +#memorykey.x.type--Assign the desired feature to the memory key. +#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS +# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL +# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser +# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group +#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#memorykey.x.sub_type = + +# Configure Memory Key1 +memorykey.1.line = +memorykey.1.value = +memorykey.1.pickup_value = +memorykey.1.type = +memorykey.1.xml_phonebook = +memorykey.1.sub_type = + +# Configure Memory Key2 +memorykey.2.line = +memorykey.2.value = +memorykey.2.pickup_value = +memorykey.2.type = +memorykey.2.xml_phonebook = +memorykey.2.sub_type = + +# Configure Memory Key3 +memorykey.3.line = +memorykey.3.value = +memorykey.3.pickup_value = +memorykey.3.type = +memorykey.3.xml_phonebook = +memorykey.3.sub_type = + +# Configure DSS Key4 +memorykey.4.line = +memorykey.4.value = +memorykey.4.pickup_value = +memorykey.4.type = +memorykey.4.xml_phonebook = +memorykey.4.sub_type = + +# Configure Memory Key5 +memorykey.5.line = +memorykey.5.value = +memorykey.5.pickup_value = +memorykey.5.type = +memorykey.5.xml_phonebook = +memorykey.5.sub_type = + +# Configure Memory Key6 +memorykey.6.line = +memorykey.6.value = +memorykey.6.pickup_value = +memorykey.6.type = +memorykey.6.xml_phonebook = +memorykey.6.sub_type = + +# Configure Memory Key7 +memorykey.7.line = +memorykey.7.value = +memorykey.7.pickup_value = +memorykey.7.type = +memorykey.7.xml_phonebook = +memorykey.7.sub_type = + +# Configure Memory Key8 +memorykey.8.line = +memorykey.8.value = +memorykey.8.pickup_value = +memorykey.8.type = +memorykey.8.xml_phonebook = +memorykey.8.sub_type = + +# Configure Memory Key9 +memorykey.9.line = +memorykey.9.value = +memorykey.9.pickup_value = +memorykey.9.type = +memorykey.9.xml_phonebook = +memorykey.9.sub_type = + +# Configure Memory Key10 +memorykey.10.line = +memorykey.10.value = +memorykey.10.pickup_value = +memorykey.10.type = +memorykey.10.xml_phonebook = +memorykey.10.sub_type = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + +#Configure Line Key1 +linekey.1.line = +linekey.1.value = +linekey.1.pickup_value = +linekey.1.type = +linekey.1.xml_phonebook = +linekey.1.label = + +#Configure Line Key2 +linekey.2.line = +linekey.2.value = +linekey.2.pickup_value = +linekey.2.type = +linekey.2.xml_phonebook = +linekey.2.label = + +#Configure Line Key3 +linekey.3.line = +linekey.3.value = +linekey.3.pickup_value = +linekey.3.type = +linekey.3.xml_phonebook = +linekey.3.label = + +#Configure Line Key4 (for T38G only) +linekey.4.line = +linekey.4.value = +linekey.4.pickup_value = +linekey.4.type = +linekey.4.xml_phonebook = +linekey.4.label = + +#Configure Line Key5 (for T38G only) +linekey.5.line = +linekey.5.value = +linekey.5.pickup_value = +linekey.5.type = +linekey.5.xml_phonebook = +linekey.5.label = + +#Configure Line Key6 (for T38G only) +linekey.6.line = +linekey.6.value = +linekey.6.pickup_value = +linekey.6.type = +linekey.6.xml_phonebook = +linekey.6.label = + +########################################################################################## +## Programmable Key (For T38G only) ## +########################################################################################## +#X ranges from 1 to 15. +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook +#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock +#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. +#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. + +#programablekey.x.value = +#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#programablekey.x.history_type = + +#programablekey.x.label--This parameter is only available to the key 1 to key 4. + +programablekey.1.type = +programablekey.1.line = +programablekey.1.value = +programablekey.1.xml_phonebook = +programablekey.1.history_type = +programablekey.1.label = + +########################################################################################## +## Expansion Key For T38G only ## +########################################################################################## +#X ranges from 1 to 6, Y ranges from 1 to 39. +#expansion_module.x.key.y.type = 37 (Switch by default) +#expansion_module.x.key.y.line = 0 +#expansion_module.x.key.y.value = +#expansion_module.x.key.y.pickup_value = +#expansion_module.x.key.y.label = + +#Each expansion module1 key1 +expansion_module.1.key.1.type = +expansion_module.1.key.1.line = +expansion_module.1.key.1.value = +expansion_module.1.key.1.pickup_value = +expansion_module.1.key.1.label = + +#Each expansion module1 key2 +expansion_module.1.key.2.type = +expansion_module.1.key.2.line = +expansion_module.1.key.2.value = +expansion_module.1.key.2.pickup_value = +expansion_module.1.key.2.label = + +#Each expansion module2 key1 +expansion_module.2.key.1.type = +expansion_module.2.key.1.line = +expansion_module.2.key.1.value = +expansion_module.2.key.1.pickup_value = +expansion_module.2.key.1.label = + +####################################################################################### +## Automatic Call Distribute ## +####################################################################################### +#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; +acd.auto_available = + +#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. +acd.auto_available_timer = + +####################################################################################### +# Action URL Settings ## +####################################################################################### + +#action_url.setup_completed--Inform the server that the phone has completed the startup. +#action_url.dnd_on-- Inform the server that the DND is activated on the phone. +#The value format is: http://IP address of server/help.xml?variable name=variable value. +#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. +#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. +#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. +#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. +#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. +#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. +#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. +#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac + +action_url.setup_completed = +action_url.log_on = +action_url.log_off = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. +lang.wui = + +#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. +#lang.gui = English +lang.gui = + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = {$yealink_time_zone} +local_time.time_zone_name = {$yealink_time_zone_name} + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = {$ntp_server_primary} +local_time.ntp_server2 = {$ntp_server_secondary} + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = {$yealink_time_zone_start_time} + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = {$yealink_time_zone_end_time} + +#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. +local_time.offset_time = {$yealink_offset_time} + +#Configure the time format; 0-12 Hour, 1-24 Hour (default); +local_time.time_format = {$yealink_time_format} + +#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; +local_time.date_format = {$yealink_date_format} + +#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = {$yealink_dhcp_time} + +#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. +local_time.manual_time_enable = + +####################################################################################### +## Hot Desking ## +####################################################################################### +#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; +#hotdesking.startup_register_name_enable = 0 (default) +#hotdesking.startup_username_enable = 1 (default) +#hotdesking.startup_password_enable = 1 (default) +#hotdesking.startup_sip_server_enable = 1 (default) +#hotdesking.startup_outbound_enable = 0 (default) + +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; +#0-Disabled, 1-Enabled; +#hotdesking.dsskey_register_name_enable = 0 (default) +#hotdesking.dsskey_username_enable = 1 (default) +#hotdesking.dsskey_password_enable = 1 (default) +#hotdesking.dsskey_sip_server_enable = 1 (default) +#hotdesking.dsskey_outbound_enable = 0 (default) + +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Distinctive Ring Tones ## +####################################################################################### + +#"X" ranges from 1 to 10; +#Configure the text to map the keywords contained in the "Alert-info" header. +#distinctive_ring_tones.alert_info.X.text = family +distinctive_ring_tones.alert_info.1.text = + +#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. +#distinctive_ring_tones.alert_info.X.ringer = 1 +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Auto Redial ## +####################################################################################### + +#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; +auto_redial.enable = + +#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. +auto_redial.interval = + +#Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10. +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; +zero_touch.enable = + +#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. +zero_touch.wait_time = + +####################################################################################### +## Push XML ## +####################################################################################### + +push_xml.server = + +#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; +push_xml.block_in_calling = + +#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; +push_xml.sip_notify = + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = + +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the dialnow rule. X ranges from 1 to 20. +#dialplan.dialnow.rule.x = +#dialplan.dialnow.line_id.x = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 20. +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## BSFT Phonebook ## +####################################################################################### + +#Configuration of BW phonebook. X ranges from 1 to 6. +#bw_phonebook.data.x.server = +#bw_phonebook.data.x.port = +#bw_phonebook.data.x.username = +#bw_phonebook.data.x.password = +#bw_phonebook.data.x.name = + +bw_phonebook.data.1.server = +bw_phonebook.data.1.port = +bw_phonebook.data.1.username = +bw_phonebook.data.1.password = +bw_phonebook.data.1.name = + +####################################################################################### +## BSFT Call Log ## +####################################################################################### + +#Configuration of the BW call log. X ranges from 1 to 3. +#bw_call_log.data.x.server = +#bw_call_log.data.x.port = +#bw_call_log.data.x.username = +#bw_call_log.data.x.password = +#bw_call_log.data.x.name = + +bw_call_log.data.1.server = +bw_call_log.data.1.port = +bw_call_log.data.1.username = +bw_call_log.data.1.password = +bw_call_log.data.1.name = + +#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; +#0-Disabled (default), 1-Enabled; +#Require reboot; +bw.calllog_and_dir = + +#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); +#Require reboot; +bw.behave_calllog = + +#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); +#Require reboot; +bw.behave_bw_dir = + +#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +####################################################################################### +## Remote phonebook ## +####################################################################################### + +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +#remote_phonebook.data.x.url = +#remote_phonebook.data.x.name = + +{if isset($yealink_remote_phonebook_1_name) } +remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name} +{else} +remote_phonebook.data.1.name = Users +{/if} +{if isset($yealink_remote_phonebook_1_url) } +remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url} +{else} +remote_phonebook.data.1.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=users +{/if} + +{if isset($yealink_remote_phonebook_2_name) } +remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name} +{else} +remote_phonebook.data.2.name = Groups +{/if} +{if isset($yealink_remote_phonebook_2_url) } +remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url} +{else} +remote_phonebook.data.2.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=groups +{/if} + +{if isset($yealink_remote_phonebook_3_name) } +remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name} +{else} +remote_phonebook.data.3.name = Extensions +{/if} +{if isset($yealink_remote_phonebook_3_url) } +remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url} +{else} +remote_phonebook.data.3.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=extensions +{/if} + +remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name} +remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url} + +remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name} +remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url} + +####################################################################################### +## LDAP Settings ## +####################################################################################### +ldap.enable = {$ldap_enable} + +#Configure the search criteria for name and number lookups. +ldap.name_filter = {$ldap_name_filter} +ldap.number_filter = {$ldap_number_filter} + +ldap.host = {$ldap_host} +ldap.port = {$ldap_port} + +ldap.base = {$ldap_base} +ldap.user = {$ldap_user} +ldap.password = {$ldap_password} + +#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. +ldap.max_hits = {$ldap_max_hits} + +ldap.name_attr = {$ldap_name_attr} +ldap.numb_attr = {$ldap_numb_attr} +ldap.display_name = {$ldap_display_name} + +#Configure the LDAP version. The valid value is 2 or 3 (default). +ldap.version = {$ldap_version} + +#Conifugre the search delay time. It ranges from 0 to 2000 (default). +ldap.search_delay = + +#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; +ldap.call_in_lookup = {$ldap_call_in_lookup} + +#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; +ldap.ldap_sort = {$ldap_sort} + +#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; +ldap.dial_lookup = {$ldap_dial_lookup} + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 +features.dnd_refuse_code = + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = + +#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; +features.call_completion_enable = + +features.dnd.on_code = +features.dnd.off_code = + +#Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default); +features.dnd.emergency_enable = + +#Specify the emergency number, multiple numbers (at most three) are separated by comma. +features.dnd.emergency_authorized_number = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = {$yealink_call_waiting} + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); +features.intercom.allow = + +#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; +features.intercom.mute = + +#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); +features.intercom.tone = + +#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); +features.intercom.barge = + +#Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled; +features.remote_phonebook.enable = + +#Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600. +features.remote_phonebook.flash_time = + +#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2. +features.hotline_number = +features.hotline_delay = + +#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). +features.dtmf.repetition = + +#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. +features.busy_tone_delay = + +#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; +features.pound_key.mode = + +#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); +features.send_key_tone = +features.key_tone = + +features.redial_tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; +#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); +features.action_uri_limit_ip = + +#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); +features.dsskey_blind_tran = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = + +#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); +#Require reboot; +features.direct_ip_call_enable = 0 +sip.trust_ctrl=1 + +#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; +features.ringer_device.is_use_headset = + +#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.group_pickup_enable = + +#Configure the group pickup code. +features.pickup.group_pickup_code = + +#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.direct_pickup_enable = + +#Configure the directed pickup code. +features.pickup.direct_pickup_code = + +#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; +#0-Disabled (default), 1-Enabled; +features.pickup.blf_visual_enable = +features.pickup.blf_audio_enable = + +#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle. +#0-Disabled (default), 1-Enabled; +features.blf_and_callpark_idle_led_enable = + +#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled; +#features.factory_pwd_enable = + +#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. +phone_setting.inter_digit_time = + +#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. +phone_setting.flash_hook_timer = + +#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; +phone_setting.lock = + +#Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10. +phone_setting.phone_lock.unlock_pin = +phone_setting.phone_lock.lock_time_out = + +#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wav - Ring8.wav. +#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav +phone_setting.ring_type = + +#Configure the active backlight level. It ranges from 1 to 10, the default value is 2. +#The same level for different phones may result in different backlight intensities. +#The backlight level of T2xP ranges from 1 to 3. +phone_setting.active_backlight_level = + +#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. +phone_setting.inactive_backlight_level = + +#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800. +phone_setting.backlight_time = + +#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800. +phone_setting.screen_saver_time = + +#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. +#phone_setting.ring_for_tranfailed = Ring1.wav +phone_setting.ring_for_tranfailed = + +#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; +phone_setting.logon_wizard = + +#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; +phone_setting.predial_autodial = 1 + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = + +#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. +phone_setting.dialnow_delay = + +#Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled; +phone_setting.custom_softkey_enable = + +#Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4; +phone_setting.theme = + +#Configure the emergency number, each separated by comma. The default value is 112,911,110. +phone_setting.emergency.number = + +#Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default); +phone_setting.sms_popup_enable = + +#Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled; +phone_setting.common_power_led_enable = + +#Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled; +phone_setting.mail_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled; +phone_setting.mute_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled; +phone_setting.hold_power_led_flash_enable = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +firmware.url = {$yealink_t20p_firmware_url} + +####################################################################################### +## Configure the access URL of the customized ringtones ## +####################################################################################### +ringtone.url = + +#ringtone.delete = http://localhost/all,delete all the customized ring tones. +ringtone.delete = + +####################################################################################### +## Configure the access URL of language file ## +####################################################################################### +gui_lang.url = + +#gui_lang.delete =http://localhost/all, delete all the customized languages. +gui_lang.delete = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate. +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Dialnow Rule/Replace Rule ## +####################################################################################### +local_contact.data.url = +auto_dst.url = +dialplan_dialnow.url = +dialplan_replace_rule.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations. +custom_factory_configuration.url = + +####################################################################################### +## Call List ## +####################################################################################### +#Configure the access URL for downloading the call list. +#Require reboot +call_list.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar. +openvpn.url = + +####################################################################################### +## Super Search URL ## +####################################################################################### +super_search.url = + +####################################################################################### +## Directory Setting ## +####################################################################################### +#Configure the access URL of the directory setting file. +directory_setting.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=favorite_setting.xml + +####################################################################################### +## Configure the access URL of the Wallpaper ## +####################################################################################### +wallpaper_upload.url = {$yealink_t20p_wallpaper} + +#Configure the phone background. +#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png +#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png +phone_setting.backgrounds = Config:yealink_t20p.png + +####################################################################################### +## Configure the access URL of the Screensaver ## +####################################################################################### +#Configure the access URL for downloading the customized wallpaper. +screen_saver.pic.url = {$yealink_t20p_screen_saver} + +####################################################################################### +## Configuration files for Var ## +####################################################################################### +#Configure the access URL for downloading the files for var. +#Require reboot +web_item_level.url = + diff --git a/resources/templates/provision/yealink/t19p/{$mac}.cfg b/resources/templates/provision/yealink/t19p/{$mac}.cfg new file mode 100644 index 0000000000..d35a1d197d --- /dev/null +++ b/resources/templates/provision/yealink/t19p/{$mac}.cfg @@ -0,0 +1,1995 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +{if isset($user_password_1) } +account.1.enable = 1 +{else} +account.1.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$auth_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = {$sip_port_1} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + +account.1.outbound_proxy.1.address = {$outbound_proxy_primary_1} +account.1.outbound_proxy.2.address = {$outbound_proxy_secondary_1} +account.1.outbound_proxy_enable = {if isset($outbound_proxy_primary_1)}1{else}0{/if} + +{if isset($outbound_proxy_1_port)} +account.1.outbound_proxy.1.port = {$outbound_proxy_1_port} +{else} +account.1.outbound_proxy.1.port = 5060 +{/if} +{if isset($outbound_proxy_1_port)} +account.1.outbound_proxy.2.port = {$outbound_proxy_2_port} +{else} +account.1.outbound_proxy.2.port = 5060 +{/if} + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + +#Configure the voice mail number of account 1. +voice_mail.number.1 = {$voicemail_number} + +#Configure the proxy server to account 1. +account.1.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.1.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = {$register_expires_1} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.1.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.1.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.1.srtp_encryption = {$yealink_srtp_encryption} + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Assign account 1 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_1) } +account.1.shared_line = {$shared_line_1} +{else} +account.1.shared_line = 0 +{/if} + +#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.1.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.1.group_pickup_code = +account.1.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.1.blf_list_code = + +#Configure the bargein code. +account.1.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.1.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.1.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.1.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.1.idle_screen_enable = + +#Define the access URL of the customized theme. +account.1.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.1.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} + +#Configure the STUN server address. +account.1.nat.stun_server = {$stun_server} + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.1.nat.udp_update_enable = 3 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.1.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.1.picture_info_enable = + +#Audio codecs for account 1 (Y ranges from 1 to 13). +#account.1.codec.y.enable = +#account.1.codec.y.payload_type = +#account.1.codec.y.priority = +#account.1.codec.y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =4 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = +account.1.codec.7.payload_type = +account.1.codec.7.priority = +account.1.codec.7.rtpmap = + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = G726-16 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 112 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = G726-24 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 102 + +account.1.codec.10.enable = 0 +account.1.codec.10.payload_type = G726-32 +account.1.codec.10.priority = 0 +account.1.codec.10.rtpmap = 2 + +account.1.codec.11.enable = 0 +account.1.codec.11.payload_type = G726-40 +account.1.codec.11.priority = 0 +account.1.codec.11.rtpmap = 104 + +account.1.codec.12.enable = 0 +account.1.codec.12.payload_type = iLBC_13_3 +account.1.codec.12.priority = 0 +account.1.codec.12.rtpmap = 97 + +account.1.codec.13.enable = 0 +account.1.codec.13.payload_type = iLBC_15_2 +account.1.codec.13.priority = 0 +account.1.codec.13.rtpmap = 97 + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 2; 0-Disabled (default), 1-Enabled; +{if isset($user_password_2) } +account.2.enable = 1 +{else} +account.2.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 2. +account.2.label = {$display_name_2} + +#Configure the display name of account 2. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$auth_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = {$sip_port_2} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = {$outbound_proxy_2} + +#Specify the server port, the default value is 5060. +account.2.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tls'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + +account.2.outbound_proxy.1.address = {$outbound_proxy_primary_2} +account.2.outbound_proxy.2.address = {$outbound_proxy_secondary_2} +account.2.outbound_proxy_enable = {if isset($outbound_proxy_primary_2)}1{else}0{/if} + + + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + +#Configure the voice mail number of account 2. +voice_mail.number.2 = *97 + +#Configure the proxy server to account 2. +account.2.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.2.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 2, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = {$register_expires_2} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.2.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.2.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.2.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Assign account 2 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_2) } +account.2.shared_line = {$shared_line_2} +{else} +account.2.shared_line = 0 +{/if} + +#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.2.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 2, the settings on a per-account basis take precedence over the settings on the phone. +account.2.group_pickup_code = +account.2.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.2.blf_list_code = + +#Configure the bargein code. +account.2.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.2.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.2.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.2.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.2.idle_screen_enable = + +#Define the access URL of the customized theme. +account.2.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.2.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} + +#Configure the STUN server address. +account.2.nat.stun_server = {$stun_server} + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.2.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.2.picture_info_enable = + +#Audio codecs for account 2 (Y ranges from 1 to 13). +#account.2.codec.Y.enable = +#account.2.codec.Y.payload_type = +#account.2.codec.Y.priority = +#account.2.codec.Y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =4 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = +account.2.codec.7.payload_type = +account.2.codec.7.priority = +account.2.codec.7.rtpmap = + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = G726-16 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 112 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = G726-24 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 102 + +account.2.codec.10.enable = 0 +account.2.codec.10.payload_type = G726-32 +account.2.codec.10.priority = 0 +account.2.codec.10.rtpmap = 2 + +account.2.codec.11.enable = 0 +account.2.codec.11.payload_type = G726-40 +account.2.codec.11.priority = 0 +account.2.codec.11.rtpmap = 104 + +account.2.codec.12.enable = 0 +account.2.codec.12.payload_type = iLBC_13_3 +account.2.codec.12.priority = 0 +account.2.codec.12.rtpmap = 97 + +account.2.codec.13.enable = 0 +account.2.codec.13.payload_type = iLBC_15_2 +account.2.codec.13.priority = 0 +account.2.codec.13.rtpmap = 97 + +####################################################################################### +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 3; 0-Disabled (default), 1-Enabled; +{if isset($user_password_3) } +account.3.enable = 1 +{else} +account.3.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 3. +account.3.label = {$display_name_3} + +#Configure the display name of account 3. +account.3.display_name = {$display_name_3} + +#Configure the username and password for register authentication. +account.3.auth_name = {$auth_id_3} +account.3.password = {$user_password_3} + +#Configure the register user name. +account.3.user_name = {$user_id_3} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.3.sip_server_host = {$server_address_3} + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = {$sip_port_3} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = {$outbound_proxy_3} + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tls'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +account.3.outbound_proxy.1.address = {$outbound_proxy_primary_3} +account.3.outbound_proxy.2.address = {$outbound_proxy_secondary_3} +account.3.outbound_proxy_enable = {if isset($outbound_proxy_primary_3)}1{else}0{/if} + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + +#Configure the voice mail number of account 3. +voice_mail.number.3 = + +#Configure the proxy server to account 3. +account.3.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.3.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 3, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = {$register_expires_3} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.3.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.3.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.3.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Assign account 3 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_3) } +account.3.shared_line = {$shared_line_3} +{else} +account.3.shared_line = 0 +{/if} + +#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.3.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 3, the settings on a per-account basis take precedence over the settings on the phone. +account.3.group_pickup_code = +account.3.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.3.blf_list_code = + +#Configure the bargein code. +account.3.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.3.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.3.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.3.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.3.idle_screen_enable = + +#Define the access URL of the customized theme. +account.3.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.3.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} + +#Configure the STUN server address. +account.3.nat.stun_server = {$stun_server} + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.3.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.3.picture_info_enable = + +#Audio codecs for account 3 (Y ranges from 1 to 13). +#account.3.codec.Y.enable = +#account.3.codec.Y.payload_type = +#account.3.codec.Y.priority = +#account.3.codec.Y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =4 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = +account.3.codec.7.payload_type = +account.3.codec.7.priority = +account.3.codec.7.rtpmap = + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = G726-16 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 112 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = G726-24 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 102 + +account.3.codec.10.enable = 0 +account.3.codec.10.payload_type = G726-32 +account.3.codec.10.priority = 0 +account.3.codec.10.rtpmap = 2 + +account.3.codec.11.enable = 0 +account.3.codec.11.payload_type = G726-40 +account.3.codec.11.priority = 0 +account.3.codec.11.rtpmap = 104 + +account.3.codec.12.enable = 0 +account.3.codec.12.payload_type = iLBC_13_3 +account.3.codec.12.priority = 0 +account.3.codec.12.rtpmap = 97 + +account.3.codec.13.enable = 0 +account.3.codec.13.payload_type = iLBC_15_2 +account.3.codec.13.priority = 0 +account.3.codec.13.rtpmap = 97 + +####################################################################################### +## Account4 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 4; 0-Disabled (default), 1-Enabled; +{if isset($user_password_4) } +account.4.enable = 1 +{else} +account.4.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 4. +account.4.label = {$display_name_4} + +#Configure the display name of account 4. +account.4.display_name = {$display_name_4} + +#Configure the username and password for register authentication. +account.4.auth_name = {$auth_id_4} +account.4.password = {$user_password_4} + +#Configure the register user name. +account.4.user_name = {$user_id_4} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.4.sip_server_host = {$server_address_4} + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = {$sip_port_4} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = {$outbound_proxy_4} + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4 == 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tls'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +account.4.outbound_proxy.1.address = {$outbound_proxy_primary_4} +account.4.outbound_proxy.2.address = {$outbound_proxy_secondary_4} +account.4.outbound_proxy_enable = {if isset($outbound_proxy_primary_4)}1{else}0{/if} + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + +#Configure the voice mail number of account 4. +voice_mail.number.4 = + +#Configure the proxy server to account 4. +account.4.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.4.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 4, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = {$register_expires_4} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.4.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.4.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Assign account 4 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_4) } +account.4.shared_line = {$shared_line_4} +{else} +account.4.shared_line = 0 +{/if} + +#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.4.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 4, the settings on a per-account basis take precedence over the settings on the phone. +account.4.group_pickup_code = +account.4.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.4.blf_list_code = + +#Configure the bargein code. +account.4.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.4.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.4.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.4.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.4.idle_screen_enable = + +#Define the access URL of the customized theme. +account.4.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.4.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} + +#Configure the STUN server address. +account.4.nat.stun_server = {$stun_server} + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + +#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.4.ringtone.ring_type = + +#Enable or disable the phone to download the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Audio codecs for account 4 (Y ranges from 1 to 13). +#account.4.codec.Y.enable = +#account.4.codec.Y.payload_type = +#account.4.codec.Y.priority = +#account.4.codec.Y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =4 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = +account.4.codec.7.payload_type = +account.4.codec.7.priority = +account.4.codec.7.rtpmap = + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = G726-16 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 112 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = G726-24 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 102 + +account.4.codec.10.enable = 0 +account.4.codec.10.payload_type = G726-32 +account.4.codec.10.priority = 0 +account.4.codec.10.rtpmap = 2 + +account.4.codec.11.enable = 0 +account.4.codec.11.payload_type = G726-40 +account.4.codec.11.priority = 0 +account.4.codec.11.rtpmap = 104 + +account.4.codec.12.enable = 0 +account.4.codec.12.payload_type = iLBC_13_3 +account.4.codec.12.priority = 0 +account.4.codec.12.rtpmap = 97 + +account.4.codec.13.enable = 0 +account.4.codec.13.payload_type = iLBC_15_2 +account.4.codec.13.priority = 0 +account.4.codec.13.rtpmap = 97 + +####################################################################################### +## Account5 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 5; 0-Disabled (default), 1-Enabled; +{if isset($user_password_5) } +account.5.enable = 1 +{else} +account.5.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 5. +account.5.label = {$display_name_5} + +#Configure the display name of account 5. +account.5.display_name = {$display_name_5} + +#Configure the username and password for register authentication. +account.5.auth_name = {$auth_id_5} +account.5.password = {$user_password_5} + +#Configure the register user name. +account.5.user_name = {$user_id_5} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.5.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.5.sip_server_host = {$server_address_5} + +#Specify the port for the SIP server. The default value is 5060. +account.5.sip_server_port = {$sip_port_5} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.5.outbound_host = {$outbound_proxy_5} + +#Specify the server port, the default value is 5060. +account.5.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tls'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} + +account.5.outbound_proxy.1.address = {$outbound_proxy_primary_5} +account.5.outbound_proxy.2.address = {$outbound_proxy_secondary_5} +account.5.outbound_proxy_enable = {if isset($outbound_proxy_primary_5)}1{else}0{/if} + +#Configure the address of the backup outbound proxy server. +account.5.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.5.backup_outbound_port = + +#Configure the voice mail number of account 5. +voice_mail.number.5 = + +#Configure the proxy server to account 5. +account.5.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.5.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.5.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +#Configure the SIP port for account 5, the default value is 5060. +account.5.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.expires = {$register_expires_5} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.5.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.5.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.5.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.5.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.5.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + +#Assign account 5 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_5) } +account.5.shared_line = {$shared_line_5} +{else} +account.5.shared_line = 0 +{/if} + +#Configure BLA number for account 5 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.5.bla_number = +account.5.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.5.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 5, the settings on a per-account basis take precedence over the settings on the phone. +account.5.group_pickup_code = +account.5.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.5.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.5.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 5 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.5.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.5.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.5.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.5.blf_list_code = + +#Configure the bargein code. +account.5.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.5.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.5.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.5.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.5.idle_screen_enable = + +#Define the access URL of the customized theme. +account.5.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.5.enable_signal_encode = + +#Configure the key for encoding. +account.5.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.5.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.5.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} + +#Configure the STUN server address. +account.5.nat.stun_server = {$stun_server} + +#Configure the STUN server port, the default value is 3478. +account.5.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.5.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.5.advanced.timer_t1 = +account.5.advanced.timer_t2 = +account.5.advanced.timer_t4 = + +#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.5.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.5.picture_info_enable = + +#Audio codecs for account5 (Y ranges from 1 to 13). +#account.5.codec.Y.enable = +#account.5.codec.Y.payload_type = +#account.5.codec.Y.priority = +#account.5.codec.Y.rtpmap = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =4 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = +account.5.codec.7.payload_type = +account.5.codec.7.priority = +account.5.codec.7.rtpmap = + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = G726-16 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 112 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = G726-24 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 102 + +account.5.codec.10.enable = 0 +account.5.codec.10.payload_type = G726-32 +account.5.codec.10.priority = 0 +account.5.codec.10.rtpmap = 2 + +account.5.codec.11.enable = 0 +account.5.codec.11.payload_type = G726-40 +account.5.codec.11.priority = 0 +account.5.codec.11.rtpmap = 104 + +account.5.codec.12.enable = 0 +account.5.codec.12.payload_type = iLBC_13_3 +account.5.codec.12.priority = 0 +account.5.codec.12.rtpmap = 97 + +account.5.codec.13.enable = 0 +account.5.codec.13.payload_type = iLBC_15_2 +account.5.codec.13.priority = 0 +account.5.codec.13.rtpmap = 97 + +####################################################################################### +## Account6 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 6; 0-Disabled (default), 1-Enabled; +{if isset($user_password_6) } +account.6.enable = 1 +{else} +account.6.enable = 0 +{/if} + +#Configure the label displayed on the LCD screen for account 6. +account.6.label = {$display_name_6} + +#Configure the display name of account 6. +account.6.display_name = {$display_name_6} + +#Configure the username and password for register authentication. +account.6.auth_name = {$auth_id_6} +account.6.password = {$user_id_6} + +#Configure the register user name. +account.6.user_name = {$user_id_6} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.6.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.6.sip_server_host = {$server_address_6} + +#Specify the port for the SIP server. The default value is 5060. +account.6.sip_server_port = {$sip_port_6} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; + + +#Specify the IP address or domain name of the outbound proxy server. +account.6.outbound_host = {$outbound_proxy_6} + +#Specify the server port, the default value is 5060. +account.6.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tls'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} + +account.6.outbound_proxy.1.address = {$outbound_proxy_primary_6} +account.6.outbound_proxy.2.address = {$outbound_proxy_secondary_6} +account.6.outbound_proxy_enable = {if isset($outbound_proxy_primary_6)}1{else}0{/if} + +#Configure the address of the backup outbound proxy server. +account.6.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.6.backup_outbound_port = + +#Configure the voice mail number of account 6. +voice_mail.number.6 = + +#Configure the proxy server to account 6. +account.6.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.6.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.6.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = + +#Configure the SIP port for account 6, the default value is 5060. +account.6.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.6.expires = {$register_expires_6} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.6.100rel_enable = {$yealink_retransmission} + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.6.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.6.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi = 0 + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.6.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.6.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.6.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = {$yealink_session_timer} + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.6.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.6.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.6.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.6.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.6.ptime = + +#Assign account 6 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +{if isset($shared_line_6) } +account.6.shared_line = {$shared_line_6} +{else} +account.6.shared_line = 0 +{/if} + +#Configure BLA number for account 6 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.6.bla_number = +account.6.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.6.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 6, the settings on a per-account basis take precedence over the settings on the phone. +account.6.group_pickup_code = +account.6.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.6.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.6.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi_to_vm = 0 + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.6.register_mac = +account.6.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 6 fails to register. It ranges from 0 to 1800, the default value is 30. +account.6.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.6.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.6.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.6.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.6.blf_list_code = + +#Configure the bargein code. +account.6.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.6.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.6.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.6.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.6.idle_screen_enable = + +#Define the access URL of the customized theme. +account.6.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.6.enable_signal_encode = + +#Configure the key for encoding. +account.6.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.6.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.6.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.6.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.6.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.6.nat.nat_traversal = + +#Configure the STUN server address. +account.6.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.6.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.6.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.6.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.6.nat.rport = {$yealink_rport} + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.6.advanced.timer_t1 = +account.6.advanced.timer_t2 = +account.6.advanced.timer_t4 = + +#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,����Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.6.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.6.picture_info_enable = + +#Audio codecs for account6 (Y ranges from 1 to 13). +#account.6.codec.Y.enable = +#account.6.codec.Y.payload_type = +#account.6.codec.Y.priority = +#account.6.codec.Y.rtpmap = + +account.6.codec.1.enable = 1 +account.6.codec.1.payload_type = PCMU +account.6.codec.1.priority = 1 +account.6.codec.1.rtpmap = 0 + +account.6.codec.2.enable = 1 +account.6.codec.2.payload_type = PCMA +account.6.codec.2.priority = 2 +account.6.codec.2.rtpmap = 8 + +account.6.codec.3.enable = 0 +account.6.codec.3.payload_type = G723_53 +account.6.codec.3.priority =4 +account.6.codec.3.rtpmap = 4 + +account.6.codec.4.enable = 0 +account.6.codec.4.payload_type = G723_63 +account.6.codec.4.priority = 0 +account.6.codec.4.rtpmap = 4 + +account.6.codec.5.enable = 1 +account.6.codec.5.payload_type = G729 +account.6.codec.5.priority = 3 +account.6.codec.5.rtpmap = 18 + +account.6.codec.6.enable = 1 +account.6.codec.6.payload_type = G722 +account.6.codec.6.priority = 4 +account.6.codec.6.rtpmap = 9 + +account.6.codec.7.enable = +account.6.codec.7.payload_type = +account.6.codec.7.priority = +account.6.codec.7.rtpmap = + +account.6.codec.8.enable = 0 +account.6.codec.8.payload_type = G726-16 +account.6.codec.8.priority = 0 +account.6.codec.8.rtpmap = 112 + +account.6.codec.9.enable = 0 +account.6.codec.9.payload_type = G726-24 +account.6.codec.9.priority = 0 +account.6.codec.9.rtpmap = 102 + +account.6.codec.10.enable = 0 +account.6.codec.10.payload_type = G726-32 +account.6.codec.10.priority = 0 +account.6.codec.10.rtpmap = 2 + +account.6.codec.11.enable = 0 +account.6.codec.11.payload_type = G726-40 +account.6.codec.11.priority = 0 +account.6.codec.11.rtpmap = 104 + +account.6.codec.12.enable = 0 +account.6.codec.12.payload_type = iLBC_13_3 +account.6.codec.12.priority = 0 +account.6.codec.12.rtpmap = 97 + +account.6.codec.13.enable = 0 +account.6.codec.13.payload_type = iLBC_15_2 +account.6.codec.13.priority = 0 +account.6.codec.13.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### + +#Enable or disable the always forward; 0-Disabled (default), 1-Enabled; +forward.always.enable = + +#Configure the target number that the phone will forward the call to. +forward.always.target = + +#Configure the on code and off code to always forward. +forward.always.on_code = +forward.always.off_code = + +#Enable or disable the busy forward; 0-Disabled (default), 1-Enabled; +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10. +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; +forward.international.enable = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + + +{foreach $keys['line'] as $row} + +#Configure Line Key {$row.device_key_id} +linekey.{$row.device_key_id}.line = {$row.device_key_line} +linekey.{$row.device_key_id}.value = {$row.device_key_value} +linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} +linekey.{$row.device_key_id}.type = {$row.device_key_type} +linekey.{$row.device_key_id}.xml_phonebook = +linekey.{$row.device_key_id}.label = {$row.device_key_label} + + +{/foreach} +