From 6d5fa3008d41878aa1f236e293eb272e9f893195 Mon Sep 17 00:00:00 2001 From: James Rose Date: Wed, 30 Jul 2014 17:28:24 +0000 Subject: [PATCH] Added provision variable yealink_rport_X so you can enable rport on yealinks per account. Default is OFF so if not set, the behavior stays the same. --- .../templates/provision/yealink/t20p/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t22p/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t26p/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t28p/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t32g/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t38g/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t42g/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t46g/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/t48g/{$mac}.cfg | 12 ++++++------ .../templates/provision/yealink/w52p/{$mac}.cfg | 10 +++++----- 10 files changed, 59 insertions(+), 59 deletions(-) diff --git a/resources/templates/provision/yealink/t20p/{$mac}.cfg b/resources/templates/provision/yealink/t20p/{$mac}.cfg index dad27aa6de..cd5c0bb272 100644 --- a/resources/templates/provision/yealink/t20p/{$mac}.cfg +++ b/resources/templates/provision/yealink/t20p/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1169,7 +1169,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1483,7 +1483,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1794,7 +1794,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t22p/{$mac}.cfg b/resources/templates/provision/yealink/t22p/{$mac}.cfg index 6b4aca2d41..6f2ee3d906 100644 --- a/resources/templates/provision/yealink/t22p/{$mac}.cfg +++ b/resources/templates/provision/yealink/t22p/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1170,7 +1170,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1484,7 +1484,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1795,7 +1795,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t26p/{$mac}.cfg b/resources/templates/provision/yealink/t26p/{$mac}.cfg index 93ffca75b3..81a6432295 100644 --- a/resources/templates/provision/yealink/t26p/{$mac}.cfg +++ b/resources/templates/provision/yealink/t26p/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1169,7 +1169,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1483,7 +1483,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1794,7 +1794,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t28p/{$mac}.cfg b/resources/templates/provision/yealink/t28p/{$mac}.cfg index 93ffca75b3..81a6432295 100644 --- a/resources/templates/provision/yealink/t28p/{$mac}.cfg +++ b/resources/templates/provision/yealink/t28p/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1169,7 +1169,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1483,7 +1483,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1794,7 +1794,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t32g/{$mac}.cfg b/resources/templates/provision/yealink/t32g/{$mac}.cfg index 4c3d86fc23..6a92541823 100644 --- a/resources/templates/provision/yealink/t32g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t32g/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1169,7 +1169,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1483,7 +1483,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1794,7 +1794,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t38g/{$mac}.cfg b/resources/templates/provision/yealink/t38g/{$mac}.cfg index 4c3d86fc23..6a92541823 100644 --- a/resources/templates/provision/yealink/t38g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t38g/{$mac}.cfg @@ -230,7 +230,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -543,7 +543,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -856,7 +856,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -1169,7 +1169,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1483,7 +1483,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.5.advanced.timer_t1 = @@ -1794,7 +1794,7 @@ account.6.nat.udp_update_enable = account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = +account.6.nat.rport = {$yealink_rport_6} #Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. account.6.advanced.timer_t1 = diff --git a/resources/templates/provision/yealink/t42g/{$mac}.cfg b/resources/templates/provision/yealink/t42g/{$mac}.cfg index 56252aa3ec..2440a9e80b 100644 --- a/resources/templates/provision/yealink/t42g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t42g/{$mac}.cfg @@ -128,7 +128,7 @@ account.1.nat.udp_update_enable = 1 account.1.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = 0 +account.1.nat.rport = {$yealink_rport_1} ####################################################################################### @@ -584,7 +584,7 @@ account.2.nat.udp_update_enable = 1 account.2.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = 0 +account.2.nat.rport = {$yealink_rport_2} ####################################################################################### @@ -1076,7 +1076,7 @@ account.3.nat.udp_update_enable = 1 account.3.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = 0 +account.3.nat.rport = {$yealink_rport_3} ####################################################################################### @@ -1568,7 +1568,7 @@ account.4.nat.udp_update_enable = 1 account.4.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = 0 +account.4.nat.rport = {$yealink_rport_4} ####################################################################################### @@ -2059,7 +2059,7 @@ account.5.nat.udp_update_enable = 1 account.5.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = 0 +account.5.nat.rport = {$yealink_rport_5} ####################################################################################### @@ -2550,7 +2550,7 @@ account.6.nat.udp_update_enable = 1 account.6.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = 0 +account.6.nat.rport = {$yealink_rport_6} ####################################################################################### diff --git a/resources/templates/provision/yealink/t46g/{$mac}.cfg b/resources/templates/provision/yealink/t46g/{$mac}.cfg index 56252aa3ec..2440a9e80b 100644 --- a/resources/templates/provision/yealink/t46g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t46g/{$mac}.cfg @@ -128,7 +128,7 @@ account.1.nat.udp_update_enable = 1 account.1.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = 0 +account.1.nat.rport = {$yealink_rport_1} ####################################################################################### @@ -584,7 +584,7 @@ account.2.nat.udp_update_enable = 1 account.2.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = 0 +account.2.nat.rport = {$yealink_rport_2} ####################################################################################### @@ -1076,7 +1076,7 @@ account.3.nat.udp_update_enable = 1 account.3.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = 0 +account.3.nat.rport = {$yealink_rport_3} ####################################################################################### @@ -1568,7 +1568,7 @@ account.4.nat.udp_update_enable = 1 account.4.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = 0 +account.4.nat.rport = {$yealink_rport_4} ####################################################################################### @@ -2059,7 +2059,7 @@ account.5.nat.udp_update_enable = 1 account.5.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = 0 +account.5.nat.rport = {$yealink_rport_5} ####################################################################################### @@ -2550,7 +2550,7 @@ account.6.nat.udp_update_enable = 1 account.6.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = 0 +account.6.nat.rport = {$yealink_rport_6} ####################################################################################### diff --git a/resources/templates/provision/yealink/t48g/{$mac}.cfg b/resources/templates/provision/yealink/t48g/{$mac}.cfg index 0c670c81dd..dabf126fdb 100644 --- a/resources/templates/provision/yealink/t48g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t48g/{$mac}.cfg @@ -128,7 +128,7 @@ account.1.nat.udp_update_enable = 1 account.1.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = 0 +account.1.nat.rport = {$yealink_rport_1} ####################################################################################### @@ -584,7 +584,7 @@ account.2.nat.udp_update_enable = 1 account.2.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = 0 +account.2.nat.rport = {$yealink_rport_2} ####################################################################################### @@ -1076,7 +1076,7 @@ account.3.nat.udp_update_enable = 1 account.3.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = 0 +account.3.nat.rport = {$yealink_rport_3} ####################################################################################### @@ -1568,7 +1568,7 @@ account.4.nat.udp_update_enable = 1 account.4.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = 0 +account.4.nat.rport = {$yealink_rport_4} ####################################################################################### @@ -2059,7 +2059,7 @@ account.5.nat.udp_update_enable = 1 account.5.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = 0 +account.5.nat.rport = {$yealink_rport_5} ####################################################################################### @@ -2550,7 +2550,7 @@ account.6.nat.udp_update_enable = 1 account.6.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = 0 +account.6.nat.rport = {$yealink_rport_6} ####################################################################################### diff --git a/resources/templates/provision/yealink/w52p/{$mac}.cfg b/resources/templates/provision/yealink/w52p/{$mac}.cfg index 1067ad5821..4af67aad40 100644 --- a/resources/templates/provision/yealink/w52p/{$mac}.cfg +++ b/resources/templates/provision/yealink/w52p/{$mac}.cfg @@ -154,7 +154,7 @@ account.1.nat.udp_update_enable = account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = +account.1.nat.rport = {$yealink_rport_1} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = @@ -395,7 +395,7 @@ account.2.nat.udp_update_enable = account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = +account.2.nat.rport = {$yealink_rport_2} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = @@ -633,7 +633,7 @@ account.3.nat.udp_update_enable = account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = +account.3.nat.rport = {$yealink_rport_3} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = @@ -873,7 +873,7 @@ account.4.nat.udp_update_enable = account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = +account.4.nat.rport = {$yealink_rport_4} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = @@ -1116,7 +1116,7 @@ account.5.nat.udp_update_enable = account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = +account.5.nat.rport = {$yealink_rport_5} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.5.advanced.timer_t1 =