From 53ceed73361f4ecf3c856a962a74a304741b2039 Mon Sep 17 00:00:00 2001 From: FusionPBX Date: Thu, 28 Sep 2017 17:31:33 -0600 Subject: [PATCH] Create y000000000056.cfg --- .../provision/yealink/t56a/y000000000056.cfg | 1427 +++++++++++++++++ 1 file changed, 1427 insertions(+) create mode 100644 resources/templates/provision/yealink/t56a/y000000000056.cfg diff --git a/resources/templates/provision/yealink/t56a/y000000000056.cfg b/resources/templates/provision/yealink/t56a/y000000000056.cfg new file mode 100644 index 0000000000..5c9b773269 --- /dev/null +++ b/resources/templates/provision/yealink/t56a/y000000000056.cfg @@ -0,0 +1,1427 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## + +####################################################################################### +## Hostname ## +####################################################################################### +static.network.dhcp_host_name = + +####################################################################################### +## PPPoE ## +####################################################################################### +network.pppoe.user = +network.pppoe.password = + + +####################################################################################### +## Network Advanced ## +####################################################################################### +##It enables or disables the PC port.0-Disabled,1-Auto Negotiation. +##The default value is 1.It takes effect after a reboot. +static.network.pc_port.enable = + +##It configures the transmission mode and speed of the Internet (WAN) port. +##0-Auto Negotiate +##1-Full Duplex 10Mbps +##2-Full Duplex 100Mbps +##3-Half Duplex 10Mbps +##4-Half Duplex 100Mbps +##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +static.network.internet_port.speed_duplex = + +##It configures the transmission mode and speed of the PC (LAN) port. +##0-Auto Negotiate +##1-Full Duplex 10Mbps +##2-Full Duplex 100Mbps +##3-Half Duplex 10Mbps +##4-Half Duplex 100Mbps +##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) +##The default value is 0.It takes effect after a reboot. +static.network.pc_port.speed_duplex = + +##It enables or disables the phone to use manually configured static IPv4 DNS when Internet (WAN) port type for IPv4 is configured as DHCP. +##0-Disabled (use the IPv4 DNS obtained by DHCP) 1-Enabled +##The default value is 0.It takes effect after a reboot. +static.network.static_dns_enable = + +static.network.ipv6_static_dns_enable = +static.network.vlan.pc_port_mode = + +##It enable or disable to use A record of TTL +##The defalue value is 1;0-Disable 1-Enable +static.network.dns.ttl_enable = + +##It configures the LAN MTU +##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. +static.network.mtu_value = + +network.attempt_expired_time = +network.dhcp.server_mac1 = +network.dhcp.server_mac2 = + +####################################################################################### +## VLAN ## +####################################################################################### +static.network.vlan.internet_port_enable = +static.network.vlan.internet_port_vid = +static.network.vlan.internet_port_priority = +static.network.vlan.pc_port_enable = +static.network.vlan.pc_port_vid = +static.network.vlan.pc_port_priority = +static.network.vlan.dhcp_enable = +static.network.vlan.dhcp_option = +##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP +##(Except T19P/T21P Models) 0-Disable 1-Enable +static.network.vlan.vlan_change.enable = + +####################################################################################### +## WEB Port ## +####################################################################################### +##It configures the HTTP port for web server access. +##The default value is 80.It takes effect after a reboot. +static.network.port.http = + +##It configures the HTTPS port for web server access. +##The default value is 443.It takes effect after a reboot. +static.network.port.https = + +static.wui.https_enable = +static.wui.http_enable = + +####################################################################################### +## QoS ## +####################################################################################### +##It configures the voice QoS. +##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 +static.network.qos.rtptos = + +##It configures the SIP QoS. +##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 +static.network.qos.signaltos = + +####################################################################################### +## 802.1X ## +####################################################################################### +static.network.802_1x.mode = +static.network.802_1x.identity = +static.network.802_1x.md5_password = +static.network.802_1x.root_cert_url = +static.network.802_1x.client_cert_url = + +##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. +##The default value is 0-Dsable , 1-Enable +static.network.802_1x.proxy_eap_logoff.enable = +####################################################################################### +## OpenVPN(Except T19P Model) ## +####################################################################################### +static.network.vpn_enable = +static.openvpn.url = + +####################################################################################### +## LLDP ## +####################################################################################### +static.network.lldp.enable = +static.network.lldp.packet_interval = + +####################################################################################### +## CDP ## +####################################################################################### +static.network.cdp.enable = +static.network.cdp.packet_interval = + +####################################################################################### +## Span to PC ## +####################################################################################### +static.network.span_to_pc_port = + +####################################################################################### +## RTP Port ## +####################################################################################### +sip.min_udp_port= +sip.max_udp_port= +sip.min_tcp_port= +sip.max_tcp_port= + +####################################################################################### +## Syslog ## +####################################################################################### +static.syslog.mode = + +##It configures the IP address or domain name of the syslog server when exporting log to the syslog server. +##It takes effect only if the parameter °∞static.syslog.mode°± is configured as Server. +##The default value is blank.It takes effect after a reboot. +static.syslog.server = + +##It configures the detail level of syslog information to be exported.0 means nothing and 6 means all. +##The default value is 3.It takes effect after a reboot.Integer from 0 to 6 +static.syslog.log_level = + +static.syslog.bootlog_upload_wait_time = +static.syslog.ftp.append_limit_mode = +static.syslog.ftp.max_logfile = +static.syslog.ftp.post_mode = +static.syslog.log_upload_period = + +####################################################################################### +## TR069 ## +####################################################################################### +static.managementserver.enable = +static.managementserver.username = +static.managementserver.password = +static.managementserver.url = +static.managementserver.connection_request_username = +static.managementserver.connection_request_password = +static.managementserver.periodic_inform_enable = +static.managementserver.periodic_inform_interval = + +####################################################################################### +## Autoprovision ## ## +####################################################################################### +### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, +### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. +### 0-Disabled, 1-Enabled. The default value is 0. +static.auto_provision.custom.sync = + +### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. +### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. +### 0-Disabled, 1-Enabled. The default value is 0. +static.auto_provision.custom.protect = + +static.auto_provision.custom.upload_method= + +auto_provision.attempt_expired_time = +####################################################################################### +## Autop Mode ## +####################################################################################### +static.auto_provision.power_on = + +####################################################################################### +## Autop PNP ## +####################################################################################### +static.auto_provision.pnp_enable = + +####################################################################################### +## Autop DHCP ## +####################################################################################### +static.auto_provision.dhcp_option.enable = +static.auto_provision.dhcp_option.list_user_options = + +####################################################################################### +## Autop Repeat ## +####################################################################################### +static.auto_provision.repeat.enable = +static.auto_provision.repeat.minutes = + +####################################################################################### +## Autop Weekly ## +####################################################################################### +static.auto_provision.weekly.enable = +static.auto_provision.weekly.dayofweek = +static.auto_provision.weekly.begin_time = +static.auto_provision.weekly.end_time = + +####################################################################################### +## Autop URL ## +####################################################################################### +static.auto_provision.server.url = +static.auto_provision.server.username = +static.auto_provision.server.password = + +####################################################################################### +## Autop AES Key ## +####################################################################################### +##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +static.auto_provision.aes_key_16.com = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. +##The default value is blank. +static.auto_provision.aes_key_16.mac = + +static.auto_provision.aes_key_in_file = + +##It configures the access URL of the custom MAC-Oriented CFG file. +##The default value is blank. +static.custom_mac_cfg.url = + +##It configures the value (vendor name of the device) of DHCP option 60. +##The default value is yealink. +static.auto_provision.dhcp_option.option60_value = +##It configuration phone update to restart automatically.It takes effect after a reboot. +##0-Disable 1-Enable +static.auto_provision.reboot_force.enable = + +####################################################################################### +## Autop wildcard ## +####################################################################################### + +static.auto_provision.url_wildcard.pn = + +####################################################################################### +## Autop Code ## +####################################################################################### +##It configures the name of the code for triggering auto provisioning. +##The default value is blank.It takes effect after a reboot. +static.autoprovision.1.name = + +##It configures the code for triggering auto provisioning. +##Valid characters are digits, # and *.Example:static.autoprovision.1.code = *99The default value is blank. +##It takes effect after a reboot. +static.autoprovision.1.code = + +##It configures the access URL of auto provisioning server.The default value is blank. +##It takes effect after a reboot. +static.autoprovision.1.url = + +##It configures the user name for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +static.autoprovision.1.user = + +##It configures the password for authentication during auto provisioning. +##The default value is blank.It takes effect after a reboot. +static.autoprovision.1.password = + +##It configures the AES key for decrypting the Common CFG file. +##The default value is blank.It takes effect after a reboot. +static.autoprovision.1.com_aes = + +##It configures the AES key for decrypting the MAC-Oriented CFG file. +##The default value is blank.It takes effect after a reboot. +static.autoprovision.1.mac_aes = + +####################################################################################### +## Watch Dog ## +####################################################################################### +static.watch_dog.enable = + +####################################################################################### +## SIP Advanced ## +####################################################################################### +sip.use_23_as_pound = +sip.rfc2543_hold = +sip.use_out_bound_in_dialog = +sip.reg_surge_prevention = +sip.send_response_by_request = +sip.notify_reboot_enable = +sip.disp_incall_to_info = +sip.limit_server_name = +sip.limit_server_reason = +sip.listen_port = +sip.tls_listen_port = +sip.trust_ctrl = +sip.nat_stun.enable = +sip.nat_stun.server = +sip.nat_stun.port = +sip.timer_t1 = +sip.timer_t2 = +sip.timer_t4 = + + + +##It is XSI authentication mode.0-Disable 1-Enable (Except T19P/T21P Models) +sip.authentication_for_xsi = +##It is DSS KEY to call park type, whether the trigger BLF function.It takes effect after a reboot. +##The default value is 0-Disable(DSS KEY to call park type,triggering BLF function) 1-Enable +sip.call_park_without_blf = +##It is ASCII conversion into corresponding symbols. +##The defalult value is blank. 0-Disable 1-Enable +sip.escape_characters.enable = +##The default value is 0 ( said according to the transmission mode configured to listen on port),1- +##1-said at the same time to monitor TCP and UDP +##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters +sip.listen_mode = +##The default value is 0-Disable, 1-Enable.It takes effect after a reboot. +##0-registered according to the uri of the tectonic refer - by domain +##1-according to refer the from header fields to construct refer - by domain + +sip.refer_by_header_auto_build = +##The default is blank.The Valid characters are digits - _.! ~ * # '() & Q462 = + R452 $,;?/ \ 0 +##It is username needs to be preserved in a special notation. +sip.reserve_characters = +##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. +##1-the out-contracting port random contact, via port to carry +##2-the out-contracting ports fixed contact, via carry fix +sip.tcp_port_random_mode = + + +####################################################################################### +## Echo Cancellation ## +####################################################################################### +voice.vad = +voice.cng = +voice.echo_cancellation = + +####################################################################################### +## Jitter Buffer ## +####################################################################################### +voice.jib.adaptive = +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +####################################################################################### +## Tones ## +####################################################################################### +voice.tone.country = +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.info = +voice.tone.stutter = +voice.tone.autoanswer = +voice.tone.message = + +####################################################################################### +## Volume ## +####################################################################################### + +voice.handfree.spk_vol = +voice.handfree.tone_vol = +voice.handset.spk_vol = +voice.handset.tone_vol = +voice.headset.spk_vol = +voice.headset.tone_vol = +voice.group_spk_vol = + +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +####################################################################################### +## Transfer ## +####################################################################################### +##It enables or disables the transferee party°Øs phone to prompt a missed call on the LCD screen before displaying +##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled +##The default value is 1. +transfer.semi_attend_tran_enable = + +##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . +##The default value is 1. +transfer.blind_tran_on_hook_enable = + +##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. +##0-Disabled,1-Enabled. +##The default value is 0. +transfer.tran_others_after_conf_enable = + +##It enables or disables the phone to complete the attended transfer through on-hook. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.on_hook_trans_enable = + +##It configures the DSS key behavior during an active call when user presses the DSS +##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. +##0-New Call,1-Attended Transfer,2-Blind Transfer. +##The default value is 2. +transfer.dsskey_deal_type = + +##It enables or disables the phone to enter Transfer to menu during multiple calls when pressing the transfer soft key or TRAN key. +##0-Disabled,1-Enabled. +##The default value is 1. +transfer.multi_call_trans_enable = + +####################################################################################### +## Language Settings ## +####################################################################################### +##It configures the language of the web user interface. +static.lang.wui = + +##It configures the language of the phone user interface. +##The default value is English. +static.lang.gui = + +gui_lang.url = +gui_lang.delete = +wui_lang.url = +wui_lang_note.url = +wui_lang.delete = + +####################################################################################### +## Auto Redial ## +####################################################################################### +auto_redial.enable = +auto_redial.interval = +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +static.zero_touch.enable = +static.zero_touch.wait_time = +static.zero_touch.network_fail_wait_times = +static.zero_touch.network_fail_delay_times = + +####################################################################################### +## Push XML ## +####################################################################################### +push_xml.server = +push_xml.block_in_calling= +push_xml.sip_notify= + +####################################################################################### +## Dial Plan ## +####################################################################################### +dialplan.area_code.code = +dialplan.area_code.min_len = +dialplan.area_code.max_len = +dialplan.area_code.line_id = + +### X ranges from 1 to 10 +###dialplan.block_out.number.x = +###dialplan.block_out.line_id.x = + +dialplan.block_out.number.1 = +dialplan.block_out.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.dialnow.rule.X = +###dialplan.dialnow.line_id.X = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +###X ranges from 1 to 100 +###dialplan.replace.prefix.X = +###dialplan.replace.replace.X = +###dialplan.replace.line_id.X = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +dialplan_dialnow.url = +phone_setting.dialnow_delay = +dialplan_replace_rule.url = + + +####################################################################################### +## Remote Phonebook(Except T20P Model) ## +####################################################################################### +###X ranges from 1 to 5 +###remote_phonebook.data.X.url = +###remote_phonebook.data.X.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = +remote_phonebook.display_name = + +###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. +###0-Disabled, 1-Enabled. The default value is 0. +features.remote_phonebook.enter_update_enable = + +##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +features.remote_phonebook.enable = + +##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. +##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. +##The default value is 21600.Integer from 3600 to 2592000,and 0. +features.remote_phonebook.flash_time = + +####################################################################################### +## LDAP ## +####################################################################################### +##It enables or disables LDAP feature.0-Disabled,1-Enabled. +##The default value is 0. +ldap.enable = + +##It configures the criteria for searching the contact name attributes. +##Example:ldap.name_filter = (|(cn=%)(sn=%)). +##The default value is blank. +ldap.name_filter = + +##It configures the criteria for searching the contact number attributes. +##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) +##The default value is blank. +ldap.number_filter = + +##It configures the IP address or domain name of the LDAP server. +##The default value is blank. +ldap.host = + +##It configures the port of the LDAP server. +##The default value is 389.Integer from 1 to 65535. +ldap.port = + +##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. +##Example:ldap.base = dc=yealink,dc=cn. +##The default value is blank. +ldap.base = + +##It configures the user name for accessing the LDAP server. +##The default value is blank. +ldap.user = + +##It configures the password for accessing the LDAP server. +##The default value is blank. +ldap.password = + +##It configures the maximum of the search results returned by the LDAP server to be displayed. +##The default value is 50.Integer from 1 to 32000. +ldap.max_hits = + +##It configures the name attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. +##The default value is blank. +ldap.name_attr = + +##It configures the number attributes of each record to be returned by the LDAP server. +##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. +##The default value is blank. +ldap.numb_attr = + +##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with °∞%°± symbol. +##Example:ldap.display_name = %cn +##The default value is blank. +ldap.display_name = + +##It configures the LDAP version. +##The default value is 3. +ldap.version = + +##It enables or disables the phone to perform an LDAP search when receiving an incoming call. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.call_in_lookup = + +##It enables or disables the phone to sort the search results in alphabetical order or numerical order. +##0-Disabled,1-Enabled. +##The default value is 0. +ldap.ldap_sort = +##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe +##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) +ldap.incoming_call_special_search.enable = +##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps +ldap.tls_mode = +ldap.call_out_lookup = + +####################################################################################### +## Features ## +####################################################################################### +features.normal_refuse_code = +features.auto_answer_delay = +features.allow_mute = +features.group_listen_in_talking_enable = +features.call_completion_enable = +features.call_num_filter = +features.direct_ip_call_enable = +features.relog_offtime = +features.ringer_device.is_use_headset = +features.factory_pwd_enable = +features.anonymous_response_code = +features.show_action_uri_option = +features.reset_by_long_press_enable = +features.show_anywhere_remote_office_enable = +features.upload_server = +features.call_log_show_num = +features.ldap.input_type = +features.call_invite_format = + +phone_setting.logon_wizard_forever_wait = +features.transfer_type = +features.caller_name_type_on_dialing = +gui_input_method.delete = +features.off_hook_answer.enable = +features.auto_linekeys.enable = + + +features.blf_pickup_only_send_code = +##It is configured in the middle of the screen shows the current default at the bottom of the account name. +##The default is 0.CNT version 1. +features.show_default_account= +features.reboot_in_talk_enable = +features.barge_in_via_username.enable = +features.flash_url_dsskey_led.enable = +static.features.default_account = +features.linekey_call_with_default_account = +features.hide_feature_access_codes.enable = +static.features.hide_zero_touch_url.enable = + + + +####################################################################################### +## Features Forward ## +####################################################################################### + +features.fwd_mode = +features.fwd_diversion_enable = + +####################################################################################### +## Features DND ## +####################################################################################### + +features.dnd_mode = +features.dnd.enable = +features.dnd.on_code = +features.dnd.off_code = +features.dnd_refuse_code = +features.dnd.emergency_enable = +features.dnd.emergency_authorized_number = + +####################################################################################### +## Features Bluetooth(Only for T46G model) ## +####################################################################################### +features.bluetooth_enable = + +####################################################################################### +## Features BLF ## +####################################################################################### +##It configures BLF LED mode and provides four kinds of definition for the BLF/BLF list key LED status. +##For more information, refer to BLF LED Mode on page 218. +##The default value is 0. +features.blf_led_mode = + +##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. +##0-Disabled,1-Enabled. +##The default value is 0.It takes effect after a reboot. +features.blf_list_version = + +####################################################################################### +## Features Intercom ## +####################################################################################### +features.intercom.allow = +features.intercom.mute = +features.intercom.tone = +features.intercom.barge = +features.intercom.led.enable = +features.intercom.subscribe.enable = + +####################################################################################### +## Features Hotline ## +####################################################################################### +##It configures the hotline number. +##The default value is blank. +features.hotline_number = + +##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. +##The default value of delay time is 4.Integer from 0 to 10 +features.hotline_delay = + +####################################################################################### +## Features DTMF ## +####################################################################################### +features.dtmf.hide = + +###Except T20P Model +features.dtmf.hide_delay = + +features.dtmf.repetition = +features.dtmf.transfer = +features.dtmf.replace_tran = +features.dtmf.duration = +features.dtmf.volume = +features.play_local_dtmf_tone_enable = + +####################################################################################### +## Features Audio Settings ## +####################################################################################### +features.headset_prior = +features.headset_training = +features.alert_info_tone = +features.busy_tone_delay = +features.send_pound_key = +features.key_as_send = +features.send_key_tone = +features.key_tone = +features.play_hold_tone.enable = +features.play_hold_tone.delay = +features.redial_tone = +features.partition_tone = + +####################################################################################### +## Features Action URI ## +####################################################################################### +features.action_uri_limit_ip = + + +####################################################################################### +## Features Prefix ## +####################################################################################### +features.password_dial.enable = +features.password_dial.prefix = +features.password_dial.length = + +####################################################################################### +## Features History ## +####################################################################################### +features.save_call_history = + +####################################################################################### +## Notification Popups ## +####################################################################################### +features.voice_mail_popup.enable= +features.missed_call_popup.enable= +features.forward_call_popup.enable= +features.text_message_popup.enable= + +####################################################################################### +## Ringtone ## +####################################################################################### +ringtone.url = +ringtone.delete = + +####################################################################################### +## Phone Settings ## +####################################################################################### +phone_setting.inter_digit_time = +phone_setting.ring_type = + +phone_setting.ring_for_tranfailed = +phone_setting.is_deal180 = +phone_setting.show_code403 = + +phone_setting.ringback_timeout = +phone_setting.ringing_timeout = + +phone_setting.page_tip = +phone_setting.predial_autodial = +phone_setting.headsetkey_mode = +features.voice_mail_tone_enable = +static.phone_setting.reserve_certs_enable = +phone_setting.called_party_info_display.enable = +phone_setting.call_info_display_method = + + + +####################################################################################### +## Power Led Settings ## +####################################################################################### +phone_setting.common_power_led_enable = +phone_setting.talk_and_dial_power_led_enable = +phone_setting.mail_power_led_flash_enable = +phone_setting.ring_power_led_flash_enable = +phone_setting.mute_power_led_flash_enable= +phone_setting.hold_and_held_power_led_flash_enable = + +##It configures the level of the active backlight intensity. +##The default value is 8. +phone_setting.active_backlight_level = + + + +####################################################################################### +## Phone Setting Display ## +####################################################################################### + +##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. +phone_setting.backlight_time = +phone_setting.backgrounds = +wallpaper_upload.url = + +####################################################################################### +## Phone Setting BLF ## +####################################################################################### +###It enables or disables the phone to automatically configure the BLF list keys in order. +###0-Disabled,1-Enabled. +###The default value is 1. + +phone_setting.auto_blf_list_enable = + +###It configures the order of BLF list keys assigned automatically. +###0-Line Keys->Extension Keys +###1-Extension Keys->Line Keys +###The default value is 0. +phone_setting.blf_list_sequence_type = + +####################################################################################### +## Key Lock ## +####################################################################################### +###It enables or disables keypad lock feature. +###0-Disabled,1-Enabled. +###The default value is 0. +phone_setting.phone_lock.enable = + + +###It configures the password for unlocking the keypad. +###The default value is 123. +phone_setting.phone_lock.unlock_pin = + +###It configures the interval (in seconds) to automatically lock the keypad. +###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) +phone_setting.phone_lock.lock_time_out = +phone_setting.emergency.number = + +####################################################################################### +## Multicast ## +####################################################################################### + +multicast.codec = + +multicast.receive_priority.enable = +multicast.receive_priority.priority = + +###X ranges from 1 to 10 +###multicast.listen_address.X.label = +###multicast.listen_address.X.ip_address = + +multicast.listen_address.1.label = +multicast.listen_address.1.ip_address = + +multicast.paging_address.1.ip_address = +multicast.paging_address.1.label = +####################################################################################### +## Super Search ## +####################################################################################### +super_search.recent_call = +super_search.url = + +####################################################################################### +## Security ## +####################################################################################### +###Define the login username and password of the user, var and administrator. +###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. +###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. + +###The following examples change the user's username to "user23" and the user's password to "user23pwd". +###static.security.user_name.user = user23 +###static.security.user_password = user23:user23pwd +###The following examples change the var's username to "var55" and the var's password to "var55pwd". +###static.security.user_name.var = var55 +###static.security.user_password = var55:var55pwd +static.security.user_name.user = +static.security.user_name.admin = +static.security.user_name.var = +static.security.user_password = + +###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. +###0-Disabled,1-Enabled. +###The default value is 1.It takes effect after a reboot. +static.security.trust_certificates = + +###It configures the source certificates for the phone to authenticate for TLS connection. +###0-Default certificates,1-Custom certificates,2-All certificates. +###The default value is 0.It takes effect after a reboot. +security.ca_cert = + +###It configures the device certificates for the phone to send for TLS authentication. +###0-Default certificates,1-Custom certificates. +###The default value is 0.It takes effect after a reboot. +static.security.dev_cert = + +###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +static.security.cn_validation = + + +####################################################################################### +## User Mode ## +####################################################################################### +###It enables or disables the 3-level permissions (admin, user, var). +###0-Disabled,1-Enabled. +###The default value is 0.It takes effect after a reboot. +static.security.var_enable = + +static.web_item_level.url = + +####################################################################################### +## Trusted Certificates ## +####################################################################################### +static.trusted_certificates.url = +static.trusted_certificates.delete = + +####################################################################################### +## Server Certificates ## +####################################################################################### +static.server_certificates.url = +static.server_certificates.delete = + + + +####################################################################################### +## Line Key ## +####################################################################################### +###T58V X ranges from 1 to 27 + +#linekey.X.type--Customize the linekey type. +#The valid types are: + +#0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial +#14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser +#34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock +#55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory + +#0-NA +#22-XML Group +#38-LDAP +#46-Network Group +#17-URL + +###linekey.X.line = +###linekey.X.value = +###linekey.X.pickup_value = +###linekey.X.type = +###linekey.X.xml_phonebook = +###linekey.X.label = +###linekey.X.extension + +###It configures the desired line to apply the key feature.Integer from 1 to 16 +linekey.1.line = + +###It configures the value of the line key feature. +###For example, when setting the key feature to BLF, it configures the number of the monitored user. +###The default value is blank. +linekey.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +linekey.1.pickup_value = +linekey.1.extension + +###It configures the key feature for the line key X. +linekey.1.type = + +###It configures the desired local group/XML group/network group for the line key X. +###It only applies to the Local Group, XML Group and Network Group features. +linekey.1.xml_phonebook = + +###It configures the label displayed on the LCD screen for each line key. +###The default value is blank. +linekey.1.label = + +####################################################################################### +## Programable Key ## +####################################################################################### +###T58V X ranges from 12 to 14 + +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-NA 2-Forward 5-DND 7-Call Return 8-SMS 9-Directed Pickup 13-Speed Dial +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 30-Menu 31-Switch Account 32-New SMS +#33-Status 34-Hot Desking 38-LDAP 40-Prefix 41-Zero Touch 43-Local Directory 44-Network Directory 45-Local Group +#46-Network Group 47-XML Directory 50-Keypad Lock 51-Switch Account Up 52-Switch Account Down 55-Meet-Me Conference 61-Directory + + +###programablekey.X.type = +###programablekey.X.line = +###programablekey.X.value = +###programablekey.X.xml_phonebook = +###programablekey.X.history_type = +###programablekey.X.label = +###programablekey.X.pickup_value = +###programablekey.X.extension = + +###It configures the key feature for the programmable key X. +programablekey.1.type = + +###It configures the desired line to apply the programmable key feature. +programablekey.1.line = + +###It configures the value of the programmable key feature. +###For example, when configuring the key feature to be Speed Dial, it configures the number. +###The default value is blank. +programablekey.1.value = + +###It configures the desired local group/XML group/network group for the programmable key. +###It only applies to the Local Group, XML Group and Network Group features. +###XML Group and Network Group features are not applicable to SIP-T20P IP phones. +programablekey.1.xml_phonebook = + +###It configures the history type of programmable key. +###0-Local History,1-Network History. +###The default value is 0. +programablekey.1.history_type = + +###It configures the label displayed on the LCD screen for each soft key. +###The default value is blank. +programablekey.1.label = + +###It configures conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to Meet-Me conference feature. +###The default value is blank. +programablekey.1.pickup_value = +programablekey.2.type = +programablekey.2.line = +programablekey.2.value = +programablekey.2.xml_phonebook = +programablekey.2.history_type = +programablekey.2.label = +programablekey.2.pickup_value = + +####################################################################################### +## Expansion Key(Only for T26P/T28P/T46G Models) ## +####################################################################################### +###T46G/T28P/T26P X ranges from 1 to 6, Y ranges from 1 to 40 + +###expansion_module.X.key.Y.type = +###expansion_module.X.key.Y.line = +###expansion_module.X.key.Y.value = +###expansion_module.X.key.Y.pickup_value = +###expansion_module.X.key.Y.label = +###expansion_module.X.key.Y.xml_phonebook = +###expansion_module.X.key.Y.extension = + +###It configures the key feature of the expansion module X key Y. +expansion_module.1.key.1.type = + +###It configures the desired line to apply the expansion module key feature.Integer from 1 to 6 +expansion_module.1.key.1.line = + +###It configures the value of the expansion module key feature. +###The default value is blank. +expansion_module.1.key.1.value = + +###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. +###It only applies to BLF and Meet-Me conference features. +###The default value is blank. +expansion_module.1.key.1.pickup_value = +expansion_module.X.key.Y.extension = + +###It configures the label displayed on the LCD screen of the expansion module for each key. +###The default value is blank. +expansion_module.1.key.1.label = + +###It only applies to the Local Group, XML Group and Network Group features.Integer from 0 to 48. +expansion_module.1.key.1.xml_phonebook = + +####################################################################################### +## Forward Always ## +####################################################################################### +forward.always.enable = +forward.always.target = +forward.always.on_code = +forward.always.off_code = + +####################################################################################### +## Forward Busy ## +####################################################################################### +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +####################################################################################### +## Forward No Answer ## +####################################################################################### +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +####################################################################################### +## Forward International ## +####################################################################################### +###It enables or disables the phone to forward incoming calls to international numbers. +###0-Disabled,1-Enabled. +###The default value is 1. +forward.international.enable = + + + +####################################################################################### +## Hotdesking Startup ## +####################################################################################### +phone_setting.logon_wizard = + + +############## +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +####################################################################################### +## Hotdesking Dsskey ## +####################################################################################### +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Alert Info ## +####################################################################################### +###X ranges from 1 to 100 +###distinctive_ring_tones.alert_info.x.text = +###distinctive_ring_tones.alert_info.x.ringer = + +###It configures the internal ringer text for distinctive ringtone. +###Example: distinctive_ring_tones.alert_info.1.text = Family +###The default value is blank. +distinctive_ring_tones.alert_info.1.text = + +###It configures the desired ring tones for each text. +###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. +###Ring tones 6-8 are only applicable to SIP-T46G IP phones. +###The default value is 1. +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Call Waiting ## +####################################################################################### +call_waiting.enable = +call_waiting.tone = +call_waiting.on_code = +call_waiting.off_code = + +####################################################################################### +## Action URL ## +####################################################################################### +action_url.setup_completed = +action_url.registered = +action_url.unregistered = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.ip_change = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = +action_url.setup_autop_finish = +action_url.held = +action_url.unheld = + + + +####################################################################################### +## Contact ## +####################################################################################### +local_contact.data.url = +local_contact.image.url = +local_contact.icon.url = +local_contact.data_photo_tar.url = + +local_contact.photo.url = + +####################################################################################### +## Custom Factory Configuration ## +####################################################################################### + +static.custom_factory_configuration.url = +static.features.custom_factory_config.enable = + +####################################################################################### +## Custom Configuration ## +####################################################################################### + +static.configuration.url = + +####################################################################################### +## Custom Softkey ## +####################################################################################### +phone_setting.custom_softkey_enable = +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +###It configures the access URL of the firmware file. +###The default value is blank.It takes effect after a reboot. +static.firmware.url = + +####################################################################################### +## RTCP ## +####################################################################################### +phone_setting.rtcp_xr_report.enable = +phone_setting.vq_rtcpxr.interval_report.enable = +phone_setting.vq_rtcpxr.session_report.enable = +phone_setting.vq_rtcpxr.states_show_on_gui.enable = +phone_setting.vq_rtcpxr.states_show_on_web.enable = +phone_setting.vq_rtcpxr_delay_threshold_critical = +phone_setting.vq_rtcpxr_delay_threshold_warning = +phone_setting.vq_rtcpxr_display_jitter.enable = +phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = +phone_setting.vq_rtcpxr_display_local_call_id.enable = +phone_setting.vq_rtcpxr_display_local_codec.enable = +phone_setting.vq_rtcpxr_display_moscq.enable = +phone_setting.vq_rtcpxr_display_moslq.enable = +phone_setting.vq_rtcpxr_display_packets_lost.enable = +phone_setting.vq_rtcpxr_display_remote_call_id.enable = +phone_setting.vq_rtcpxr_display_remote_codec.enable = +phone_setting.vq_rtcpxr_display_round_trip_delay.enable = +phone_setting.vq_rtcpxr_display_start_time.enable = +phone_setting.vq_rtcpxr_display_stop_time.enable = +phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = +phone_setting.vq_rtcpxr_interval_period = +phone_setting.vq_rtcpxr_moslq_threshold_critical = +phone_setting.vq_rtcpxr_moslq_threshold_warning = +voice.rtcp.enable = +voice.rtcp_intval = +voice.rtcp_xr.enable = +voice.rtcp_cname = + + + +####################################################################################### +## DNS ## +####################################################################################### +dns_cache_a.1.name = +dns_cache_a.1.ip = +dns_cache_a.1.ttl = +dns_cache_srv.1.name = +dns_cache_srv.1.port = +dns_cache_srv.1.priority = +dns_cache_srv.1.target = +dns_cache_srv.1.weight = +dns_cache_srv.1.ttl = +dns_cache_naptr.1.name = +dns_cache_naptr.1.flags = +dns_cache_naptr.1.order = +dns_cache_naptr.1.preference = +dns_cache_naptr.1.replace = +dns_cache_naptr.1.service = +dns_cache_naptr.1.ttl = + + +####################################################################################### +## V80 Add ## +####################################################################################### +## Add Time 2015.6.26 +static.network.attempt_expired_time = +static.network.dhcp.server_mac1 = +static.network.dhcp.server_mac2 = +features.redial_via_local_sip_server.enable = +features.action_uri_force_autop = +features.call_out_history_by_off_hook.enable = +features.blf_call_out_by_number.enable = +features.save_init_num_to_history.enable = +features.action_uri.enable = +features.headset_play_phone_ringtone.enable = +features.forward.emergency.enable = +features.forward.emergency.authorized_number = +features.auto_answer_tone.enable = +features.ip_call.auto_answer.enable = +custom.features.dnd_sync.enable = +default_input_method.xml_browser_input_screen = +action_url.headset = +action_url.handfree +action_url.cancel_callout = +action_url.remote_busy = +action_url.call_remote_canceled = +action_url.call_waiting_on = +action_url.call_waiting_off = +sip.terminate_notify_sub_delay_time = +sip.bind_local_addr_enable = +voice.side_tone = +static.security.default_access_level = +static.auto_provision.attempt_expired_time = +phone_setting.ringback_timeout = +phone_setting.ringing_timeout = + +####################################################################################### +## V80-SP1 Add ## +####################################################################################### +##Add Time 2015.9.2 +static.wifi.enable = +static.wifi.1.label = +static.wifi.1.ssid = +static.wifi.1.security_mode = +static.wifi.1.cipher_type = +static.wifi.1.password = +features.bluetooth_adapter_name= +####################################################################################### +## V80-SP2 Add ## +####################################################################################### +##Add Time 2016.5.26 +features.power_saving.enable= +features.power_saving.office_hour.idle_timeout = +features.power_saving.off_hour.idle_timeout = +features.power_saving.user_input_ext.idle_timeout= +features.power_saving.office_hour.monday = +features.power_saving.office_hour.tuesday = +features.power_saving.office_hour.wednesday = +features.power_saving.office_hour.thursday = +features.power_saving.office_hour.friday = +features.power_saving.office_hour.saturday = +features.power_saving.office_hour.sunday = +screensaver.wait_time= + +####################################################################################### +## V81 Add ## +####################################################################################### +dialplan.digitmap.apply_to.on_hook_dial = +dialplan.digitmap.apply_to.directory_dial = +dialplan.digitmap.apply_to.forward = +dialplan.digitmap.apply_to.press_send = +dialplan.digitmap.enable = +dialplan.digitmap.string = +dialplan.digitmap.interdigit_long_timer = +dialplan.digitmap.interdigit_short_timer = +dialplan.digitmap.no_match_action = +dialplan.digitmap.active.on_hook_dialing = +static.auto_provision.flexible.enable = +static.auto_provision.flexible.interval= +static.auto_provision.flexible.begin_time = +static.auto_provision.flexible.end_time = +voice.jib.wifi.adaptive = +voice.jib.wifi.min = +voice.jib.wifi.max = +voice.jib.wifi.normal = +wui.quick_login = +multicast.listen_address.1.volume = +multicast.receive.use_speaker = +multicast.listen_address.1.channel = +multicast.paging_address.1.channel = +dialplan.emergency.asserted_id_source = +dialplan.emergency.custom_asserted_id = +dialplan.emergency.server.1.address = +dialplan.emergency.server.1.port = +dialplan.emergency.server.1.transport_type = +dialplan.emergency.1.value = +dialplan.emergency.1.server_priority = +features.keep_mute.enable = +voice.tone.secondary_dial = +features.power_saving.intelligent_mode = +features.blf_active_backlight.enable = +features.intercom.headset_prior.enable = +expansion_module.1.key.1.extension = + + +####################################################################################### +## Android phone-T58V Add ## +####################################################################################### +##Add Time 2016.9.2 + +sip.listen_in_peer_localip.enable = +wifi.802_11e.enable = +phone_setting.permit_silent_mode.enable = +phone_setting.bluetooth_talk.enable = +sip.h264.peer_resolution.default = + +features.doorphone.%d.display_name = +features.doorphone.%d.full_screen = +features.doorphone.%d.phone_number = +features.doorphone.%d.send_audio = +features.doorphone.%d.send_video = +features.doorphone.%d.unlock_pin =