diff --git a/resources/templates/provision/yealink/w56p/y000000000025.cfg b/resources/templates/provision/yealink/w56p/y000000000025.cfg
new file mode 100644
index 0000000000..7cf1b87848
--- /dev/null
+++ b/resources/templates/provision/yealink/w56p/y000000000025.cfg
@@ -0,0 +1,545 @@
+#!version:1.0.0.1
+
+##File header "#!version:1.0.0.1" can not be edited or deleted.##
+
+#######################################################################################
+##                                   Network                                         ##
+#######################################################################################
+#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address;
+#Require reboot;
+network.internet_port.type =
+
+#Configure the static IP address, submask, gateway and DNS server.
+#Require reboot;
+network.internet_port.ip =
+network.internet_port.mask =
+network.internet_port.gateway =
+network.primary_dns = {$dns_server_primary}
+network.secondary_dns = {$dns_server_secondary}
+
+#Configure the username and password for PPPOE connection.
+#Require reboot;
+network.pppoe.user =
+network.pppoe.password =
+
+#Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled;
+#Require reboot;
+network.vlan.internet_port_enable = 0
+
+#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
+#Require reboot;
+network.vlan.internet_port_vid =
+
+#Configure the VLAN priority, it ranges from 0 (default) to 7.
+#Require reboot;
+network.vlan.internet_port_priority =
+
+#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default);
+#Require reboot;
+network.vlan.dhcp_enable =
+
+#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255.
+#Multiple options separated by a comma. It supports up to 5 options in all.
+#Require reboot;
+network.vlan.dhcp_option =
+
+#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535.
+#Require reboot;
+network.port.http =
+network.port.https =
+
+#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 12780.
+#Require reboot;
+network.port.max_rtpport =
+
+#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780.
+#Require reboot;
+network.port.min_rtpport =
+
+#Configure the voice QOS. It ranges from 0 to 63, the default value is 40.
+#Require reboot;
+network.qos.rtptos =
+
+#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26.
+#Require reboot;
+network.qos.signaltos =
+
+#Configure the 802.1x mode; 0-Disabled (default), 1-Enabled (EAP-MD5);
+#Require reboot;
+network.802_1x.mode =
+
+#Configure the username and password for 802.1x authentication.
+#Require reboot;
+network.802_1x.identity =
+network.802_1x.md5_password =
+
+#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled;
+#Require reboot;
+network.vpn_enable =
+
+#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default);
+#Require reboot;
+network.lldp.enable =
+
+#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60.
+#Require reboot;
+network.lldp.packet_interval =
+
+#######################################################################################
+##                                   Syslog Server                                   ##
+#######################################################################################
+
+#Configure the syslog mode; 0-Local, 1-Server,the default value is 0;
+#Require reboot;
+syslog.mode =
+
+#Configure the IP address of the syslog server;
+#Require reboot;
+syslog.server =
+
+#Configure the syslog level. It ranges from 0 to 6, the default value is 3.
+#Require reboot;
+syslog.log_level =
+
+#######################################################################################
+##                                   Auto Provisioning                               ##
+#######################################################################################
+
+#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled(default);
+auto_provision.pnp_enable = 1
+
+#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default);
+auto_provision.mode = 1
+
+#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled;
+auto_provision.repeat.enable = 1
+
+#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440.
+auto_provision.repeat.minutes =
+
+#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled;
+auto_provision.weekly.enalbe =
+
+#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly.
+auto_provision.weekly.mask =
+auto_provision.weekly.begin_time =
+auto_provision.weekly.end_time =
+
+#Configure the URL of the auto provisioning server.
+auto_provision.server.url = {$yealink_provision_url}
+
+#Configure the username and password for downloading.
+auto_provision.server.username = {$http_auth_username}
+auto_provision.server.password = {$http_auth_password}
+
+#Configure the domain name of the PNP server.
+auto_provision.pnp_domain_name =
+
+#Configure the PNP vendor information.
+auto_provision.pnp_event_vendor =
+
+#Configure the name of the Common configuration file.
+auto_provision.common_file_name =
+
+#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default);
+auto_provision.dhcp_enable =
+
+#Configure the value (manufacturer of the device) of DHCP option 60.
+auto_provision.dhcp_option.option60_value =
+
+#Configure the custom DHCP option number. It ranges from 128 to 254.
+auto_provision.dhcp_option.list_user_options =
+
+#Configure AES key (16 characters) for decrypting the common CFG file.
+auto_provision.aes_key_16.com =
+
+#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file.
+auto_provision.aes_key_16.mac =
+
+#######################################################################################
+##                                   Phone Features                                  ##
+#######################################################################################
+
+#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default);
+sip.use_out_bound_in_dialog =
+
+#Configure the registration random time (in seconds). It ranges from 0 (default) to 60.
+sip.reg_surge_prevention =
+
+#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call;
+#0-Disabled, 1-Enabled (default);
+transfer.semi_attend_tran_enable =
+
+#Enable or disable the phone to complete the blind or attended transfer through on-hook;
+#0-Disabled (default), 1-Enabled;
+transfer.blind_tran_on_hook_enable =
+transfer.on_hook_trans_enable =
+
+#Enable or disable to access the web user interface of phone using the http/https protocol;
+#0-Disabled,1-Enabled (default);
+#Require Reboot;
+wui.https_enable =
+wui.http_enable =
+
+#Enable or disable the feature key synchronization, 0-Disabled (default), 1-Enabled;
+bw.feature_key_sync =
+
+#######################################################################################
+##                                   Security Settings                               ##
+#######################################################################################
+
+#Enable or disable the phone to only accept the certificates in the Trusted Certificates list;
+#0-Disabled, 1-Enabled (default);
+security.trust_certificates = {if $trusted_cert_only == "false"}0{elseif $trusted_cert_only == "true"}1{/if}
+
+#Set the password of the user or the administrator, the value format is: user:password or admin:password;
+{if isset($user_name) }
+security.user_name.user = {$user_name}
+security.user_password = {$user_name}:{$user_password}
+{/if}
+{if isset($admin_name) }
+security.user_name.admin = {$admin_name}
+security.user_password = {$admin_name}:{$admin_password}
+{/if}
+{if isset($var_name) }
+security.user_name.var = {$var_name}
+security.user_password = {$var_name}:{$var_password}
+{/if}
+
+base.pin_code =
+
+#######################################################################################
+##                                   Language Settings                               ##
+#######################################################################################
+
+#Specify the web language, the valid values are: English, Chinese_S, German, Italian and Turkish;
+lang.wui =
+
+#######################################################################################
+##                                   Time Settings                                   ##
+#######################################################################################
+
+#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
+#The default time zone name is China(Beijing).
+#local_time.time_zone = +8
+#local_time.time_zone_name = China(Beijing)
+local_time.time_zone = {$yealink_time_zone}
+local_time.time_zone_name = {$yealink_time_zone_name}
+
+#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
+local_time.ntp_server1 = {$ntp_server_primary}
+local_time.ntp_server2 = {$ntp_server_secondary}
+
+#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
+local_time.interval =
+
+#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
+local_time.summer_time =
+
+#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
+local_time.dst_time_type =
+
+#Configure the start time of DST. The default value is 1/1/0.
+#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
+#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
+#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
+local_time.start_time = {$yealink_time_zone_start_time}
+
+#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
+local_time.end_time = {$yealink_time_zone_end_time}
+
+#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank.
+local_time.offset_time = {$yealink_offset_time}
+
+#Configure the time format; 0-12 Hour, 1-24 Hour (default);
+local_time.time_format = {$yealink_time_format}
+
+#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
+local_time.date_format = {$yealink_date_format}
+
+#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
+local_time.dhcp_time = {$yealink_dhcp_time}
+
+#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0.
+local_time.manual_time_enable =
+
+#######################################################################################
+##                                   Dial Plan                                       ##
+#######################################################################################
+
+#Configure the area code.
+dialplan.area_code.code =
+dialplan.area_code.min_len = 1
+dialplan.area_code.max_len = 15
+
+#When applying the rule to multiple lines, each line ID separated by comma.
+#e.g. dialplan.area_code.line_id = 1, 2, 3
+dialplan.area_code.line_id =
+
+#Configure the block out number. X ranges from 1 to 10.
+#dialplan.block_out.number.x =
+dialplan.block_out.number.1 =
+
+#When applying the rule to multiple lines, each line ID separated by comma, e.g. 1,2,3.
+#dialplan.block_out.line_id.x =
+dialplan.block_out.line_id.1 =
+
+#Configure the replace rule. X ranges from 1 to 10;
+#dialplan.replace.prefix.x =
+#dialplan.replace.replace.x =
+#dialplan.replace.line_id.x =
+
+dialplan.replace.prefix.1 =
+dialplan.replace.replace.1 =
+dialplan.replace.line_id.1 =
+
+#######################################################################################
+##                                   Phone Settings                                  ##
+#######################################################################################
+
+#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here;
+#features.dnd_refuse_code = 480
+
+#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default).
+features.normal_refuse_code = 486
+
+account.X.dnd.on_code =
+account.X.dnd.off_code =
+
+#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default);
+call_waiting.enable = {$yealink_call_waiting}
+
+#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default);
+call_waiting.tone =
+
+#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
+features.direct_ip_call_enable = 0
+sip.trust_ctrl=1
+
+#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default);
+features.save_call_history =
+
+#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
+features.relog_offtime = 5
+
+#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default);
+phone_setting.is_deal180 = 1
+
+#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled;
+phone_setting.predial_autodial = 1
+
+#######################################################################################
+##                                   Base_Upgrade                                    ##
+#######################################################################################
+firmware.url = {$yealink_w52p_firmware_url}
+
+#######################################################################################
+##                                  Handset_upgrade                                            ##
+#######################################################################################
+
+over_the_air.url = {$yealink_w52p_handset_firmware_url}
+over_the_air.base_trigger = 1
+over_the_air.handset_tip = 1
+
+#######################################################################################
+##                                   Certificates                                    ##
+#######################################################################################
+trusted_certificates.url =
+
+#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates;
+trusted_certificates.delete =
+
+server_certificates.url =
+
+#server_certificates.delete = http://localhost/all, delete the server certificate;
+server_certificates.delete =
+
+#######################################################################################
+##                                   Local Contact/DST Time/Replace Rule             ##
+#######################################################################################
+auto_dst.url =
+dialplan_replace_rule.url =
+blacklist.url =
+handset.X.contact_list.url =
+
+#######################################################################################
+##                                   Customized Factory Configurations               ##
+#######################################################################################
+#Configure the access URL for downloading the customized factory configurations;
+custom_factory_configuration.url =
+
+#######################################################################################
+##                                   OpenVPN                                         ##
+#######################################################################################
+#Configure the access URL for downloading the open VPN tar;
+openvpn.url =
+
+
+#######################################################################################
+##         	    Remote Phonebook                                                     ##
+#######################################################################################
+
+#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5.
+remote_phonebook.display_name =
+
+{if isset($yealink_remote_phonebook_1_name) }
+remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name}
+{else}
+remote_phonebook.data.1.name = Users
+{/if}
+{if isset($yealink_remote_phonebook_1_url) }
+remote_phonebook.data.1.url =  {$yealink_remote_phonebook_1_url}
+{else}
+remote_phonebook.data.1.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=users
+{/if}
+
+{if isset($yealink_remote_phonebook_2_name) }
+remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name}
+{else}
+remote_phonebook.data.2.name = Groups
+{/if}
+{if isset($yealink_remote_phonebook_2_url) }
+remote_phonebook.data.2.url =  {$yealink_remote_phonebook_2_url}
+{else}
+remote_phonebook.data.2.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=groups
+{/if}
+
+{if isset($yealink_remote_phonebook_3_name) }
+remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name}
+{else}
+remote_phonebook.data.3.name = Extensions
+{/if}
+{if isset($yealink_remote_phonebook_3_url) }
+remote_phonebook.data.3.url =  {$yealink_remote_phonebook_3_url}
+{else}
+remote_phonebook.data.3.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=extensions
+{/if}
+
+remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name}
+remote_phonebook.data.4.url =  {$yealink_remote_phonebook_4_url}
+
+remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name}
+remote_phonebook.data.5.url =  {$yealink_remote_phonebook_5_url}
+
+#######################################################################################
+##                                   Network Directory                               ##
+#######################################################################################
+
+#Configure the interval(in minutes) for the phone to update phonebook,(1440 by default);
+directory.update_time_interval =
+
+#Enable or disable the phone to match the incoming call with the contact in the remote phonebook; 0-Disabled, 1-Enabled(default);
+directory.incoming_call_match_enable =
+
+#Enable or disable the broadsoft directory; 0-Disabled (default), 1-Enabled;
+bw.directory_enable =
+
+#Network Phonebook
+xsi.host =
+xsi.user =
+xsi.password =
+bw_phonebook.group_enable = 1
+bw_phonebook.group_common_enable = 0
+bw_phonebook.enterprise_enable = 0
+bw_phonebook.enterprise_common_enable = 0
+bw_phonebook.personal_enable = 0
+bw_phonebook.update_interval = 1440
+
+#Network Call Log
+bw_phonebook.call_log_enable = 0
+
+
+#######################################################################################
+##                                   Tone                                            ##
+#######################################################################################
+voice.tone.country = Custom
+voice.tone.dial =
+voice.tone.ring =
+voice.tone.busy =
+voice.tone.callwaiting =
+
+
+#######################################################################################
+##                                   Number Assignment                               ##
+#######################################################################################
+#The line accept to incoming(1,2,3,4,5);X ranges from 1 to 5
+#handset.X.incoming_lines = 1,2,3,4
+
+handset.1.incoming_lines =
+
+#The line accept to call out(1,2,3,4,5)
+#handset.X.dial_out_lines = 1,2,5
+#handset.X.dial_out_default_line = 1
+
+handset.1.dial_out_lines =
+handset.1.dial_out_default_line =
+
+handset.1.name =
+
+#######################################################################################
+##                                   Auto Provisioning Code                          ##
+#######################################################################################
+
+#This feature allows user to trigger the auto provisioning by pressing a predefined string on the phone.
+#Require reboot;
+#"X" ranges from 1 to 50
+
+#Configure the auto provisioning name.
+#The valid value is a string, the maximum length is 100.
+#autoprovision.X.name =
+
+#Configure the auto provisioning code;
+#The valid value is a string, the maximum length is 100.
+#autoprovision.X.code =
+
+#Configure the URL of the auto provisioning server.
+#The valid value is a string, the maximum length is 256.
+#autoprovision.X.url =
+
+#Configure the username and password for downloading.
+#The valid value is a string, the maximum length is 100.
+#autoprovision.X.user =
+#autoprovision.X.password =
+
+#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file.
+#autoprovision.X.com_aes =
+#autoprovision.X.mac_aes =
+
+autoprovision.1.name =
+autoprovision.1.code =
+autoprovision.1.url =
+autoprovision.1.user =
+autoprovision.1.password =
+autoprovision.1.com_aes =
+autoprovision.1.mac_aes =
+
+
+#######################################################################################
+##                                   TR069                                           ##
+#######################################################################################
+#The TR069 feature is only applicable to some designated firmware version.
+#All settings of TR069 require reboot.
+#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled;
+
+managementserver.enable =
+managementserver.username =
+managementserver.password =
+managementserver.url =
+managementserver.periodic_inform_enable =
+managementserver.periodic_inform_interval =
+managementserver.connection_request_username =
+managementserver.connection_request_password =
+
+
+#######################################################################################
+##                                   SNMP                                            ##
+#######################################################################################
+#Enable or disable the SNMP feature; 0-Disabled (default), 1-Enabled;
+#Require reboot;
+network.snmp.enable =
+network.snmp.port =
+
+#Configure the IP address(es) of the trusted SNMP server,multiple IP addresses must be separated by a space.
+#Require reboot;
+network.snmp.trust_ip =
+